technical data Seat Cordoba 2005 Owner's Manual

199 If and when
Safety FirstControls and equipment Tips and Maintenance Technical Data
I
In
ns
st
ta
al
ll
li
in
ng
g aa rra
ad
di
io
o
If a radio is installed or if the factory-provided radio is replaced,
including speakers, the following must be noted:
•Connectors* fitted in the vehicle are for Original SEAT Radios
1).
•Radios with other connections must be connected with an
adapter cable which can also be obtained from Technical Service
Centres.
C Ca
au
ut
ti
io
on
n
Furthermore, important electronic components could deteriorate or be
damaged. In case of a disturbance in the speed signal, for example, it could
cause failure in the engine control, automatic gearbox, ABS, etc.
Even if the speed signal is connected to a radio fitted with an automatic
volume adjustment by a different manufacturer, a failure of the previously
mentioned kind could occur.
To access the original speakers, the entire door panel must be
removed. Since this operation requires special tools and expertise,
we recommend that this be undertaken by a Technical Service
Centre.
• For this reason, it is advisable to have the radio and speakers
fitted by a Technical Service Centre.
• The radios from the SEAT Original Accessories program
1)
correspond to factory models and guarantee a trouble-free
installation. These radios are fitted with advanced technology and
are easy-to-use.
• It is also advisable to use speakers, assembly kits, antennas and
anti-parasite kits from the Original Accessories program
1). These
parts have been created for each type of vehicle.
K
Roof antenna*
The vehicle may be fitted with an extendable anti-theft roof
antenna* which can be folded backwards, i.e. at a car wash.
T To
o ffo
ol
ld
d
Unscrew rod, bend backwards to the horizontal position and screw
in.
T To
o uus
se
e
Proceed in reverse.
K
N Ne
ev
ve
er
r ccu
ut
t aa cca
ab
bl
le
e aan
nd
d nne
ev
ve
er
r lle
ea
av
ve
e iit
t wwi
it
th
ho
ou
ut
t iin
ns
su
ul
la
at
ti
io
on
n.
. IIf
f nne
ec
ce
es
ss
sa
ar
ry
y uus
se
e aan
n
a ad
da
ap
pt
to
or
r.
.
O Ot
th
he
er
rw
wi
is
se
e tth
he
e cca
ab
bl
le
es
s cco
ou
ul
ld
d bbe
e oov
ve
er
rl
lo
oa
ad
de
ed
d aan
nd
d cca
au
us
se
e aa ssh
ho
or
rt
t cci
ir
rc
cu
ui
it
t ––
d da
an
ng
ge
er
r oof
f ffi
ir
re
e.
.
W
WA
AR
RN
NI
IN
NG
G
1)Not for all countries

200If and when
M
Mo
ob
bi
il
le
e tte
el
le
ep
ph
ho
on
ne
es
s aan
nd
d rra
ad
di
io
o tte
el
le
ep
ph
ho
on
ne
es
s
Mobile phones and radio – telephones should be installed by a
specialised workshop.
SEAT has authorised the use of mobile telephones and two-way
radios for your vehicle with correctly installed external aerial and
maximum broadcast power of 10 Watts.
C Ca
au
ut
ti
io
on
n
When using mobile telephones or two-way, faults in the vehicle electrics
could occur under the following conditions:
– no external aerial
– external aerial incorrectly installed
– broadcast power higher than 10 Watts.
Mobile telephones or two-way radios must not, therefore, be operated
inside the vehicle without a separate external aerial or with an aerial which
has been incorrectly installed.
Furthermore, optimal range is only achieved with an external aerial.
N No
ot
te
e
Please take the time to review the instruction manuals provided with mobile
telephones and two-way radios!
If you wish to use mobile phones or radio telephones with a
transmission power of over 10 W, you must necessarily check with
your Technical Service Centre. They will inform you about the
technical possibilities for additional mobile and radio phone
equipment.
E Em
me
er
rg
ge
en
nc
cy
y sst
ta
ar
rt
ti
in
ng
g
Jump leads
If the engine will not start because the battery is flat, j
ju
um
mp
p lle
ea
ad
ds
s
can be connected to the battery of another vehicle to start the
engine. The following points should be noted:
• Both batteries must be of the 12 Volt variety and the capacity
(Ah) of the booster battery must be approximately the same as that
of the flat battery.
• The jumper cables must be heavy enough to carry the load. Note
cable manufacturer’s data.
• Only use jumper cables with insulated clips.
P Pl
le
ea
as
se
e cco
on
nc
ce
en
nt
tr
ra
at
te
e oon
n yyo
ou
ur
r ddr
ri
iv
vi
in
ng
g ffi
ir
rs
st
t oof
f aal
ll
l.
. NNe
ev
ve
er
r iin
ns
st
ta
al
ll
l tte
el
le
ep
ph
ho
on
ne
e
r re
et
ta
ai
in
ne
er
rs
s oon
n tth
he
e AAi
ir
r BBa
ag
g cco
ov
ve
er
r oor
r wwi
it
th
hi
in
n iit
ts
s rra
an
ng
ge
e oof
f eef
ff
fe
ec
ct
ti
iv
ve
en
ne
es
ss
s.
. TTh
hi
is
s
w wo
ou
ul
ld
d iin
nc
cr
re
ea
as
se
e tth
he
e rri
is
sk
k oof
f iin
nj
ju
ur
ry
y ssh
ho
ou
ul
ld
d tth
he
e AAi
ir
r BBa
ag
g bbe
e aac
ct
ti
iv
va
at
te
ed
d ddu
ur
ri
in
ng
g aan
n
a ac
cc
ci
id
de
en
nt
t.
.
K
W WA
AR
RN
NI
IN
NG
G
M Mo
ob
bi
il
le
e tte
el
le
ep
ph
ho
on
ne
es
s aan
nd
d ttw
wo
o-
-w
wa
ay
y rra
ad
di
io
os
s oop
pe
er
ra
at
te
ed
d iin
ns
si
id
de
e tth
he
e vve
eh
hi
ic
cl
le
e wwi
it
th
ho
ou
ut
t
a a sse
ep
pa
ar
ra
at
te
e eex
xt
te
er
rn
na
al
l aae
er
ri
ia
al
l oor
r wwi
it
th
h aan
n iin
nc
co
or
rr
re
ec
ct
tl
ly
y iin
ns
st
ta
al
ll
le
ed
d eex
xt
te
er
rn
na
al
l aae
er
ri
ia
al
l cca
an
n
b be
e hha
ar
rm
mf
fu
ul
l tto
o hhe
ea
al
lt
th
h ddu
ue
e tto
o tth
he
e eex
xt
tr
re
em
me
el
ly
y hhi
ig
gh
h eel
le
ec
ct
tr
ro
om
ma
ag
gn
ne
et
ti
ic
c ffi
ie
el
ld
ds
s
g ge
en
ne
er
ra
at
te
ed
d.
.
W
WA
AR
RN
NI
IN
NG
G


201 If and when
Safety FirstControls and equipment Tips and Maintenance Technical Data
• There must be no contact between the vehicles, otherwise
current can flow as soon as the plus terminals are connected.
• The flat battery must be properly connected to the electrical
system.
• The engine of the boosting vehicle must be running.
• Ensure that the insulated clips have enough contact to metal.
This is particularly applicable to clips which are attached to the
engine block.
C Co
ol
lo
or
rs
s oof
f jju
um
mp
pe
er
r cca
ab
bl
le
es
s:
:
Positive cable: generally red.
Negative cable: generally black, brown or blue.
K
How to jump start
AFlat battery
BBoosting battery
The battery is in the engine compartment on the left looking
forward.
T Th
he
e eem
me
er
rg
ge
en
nc
cy
y sst
ta
ar
rt
ti
in
ng
g cca
ab
bl
le
e mmu
us
st
t bbe
e aat
tt
ta
ac
ch
he
ed
d iin
n tth
he
e ffo
ol
ll
lo
ow
wi
in
ng
g
o or
rd
de
er
r:
:
Before the starting cable can be connected to the (
+ +) terminal on
the battery of the vehicle, the cover of the fuse holder must firstbe
opened
⇒page 168.
1 1. One end of (+
+) cable (usually red) to the (+
+) terminal of the flat
batteryA.
A A ffl
la
at
t bba
at
tt
te
er
ry
y cca
an
n ffr
re
ee
ez
ze
e aat
t tte
em
mp
pe
er
ra
at
tu
ur
re
es
s oof
f lle
es
ss
s tth
ha
an
n 00°
°C
C.
. AA ffl
la
at
t bba
at
tt
te
er
ry
y
m mu
us
st
t ffi
ir
rs
st
t bbe
e tth
ha
aw
we
ed
d oou
ut
t bbe
ef
fo
or
re
e aat
tt
ta
ac
ch
hi
in
ng
g tth
he
e jju
um
mp
p lle
ea
ad
ds
s,
, aas
s iit
t cco
ou
ul
ld
d
o ot
th
he
er
rw
wi
is
se
e eex
xp
pl
lo
od
de
e.
.
W
WA
AR
RN
NI
IN
NG
G
A
B
X
1.
2. 3.4.
B1H-236CFig. 162

203 If and when
Safety FirstControls and equipment Tips and Maintenance Technical Data
• When there is no lubricant in the manual or automatic gearbox,
the vehicle may only be towed with driving wheels lifted.
A tow-rope or a towing bar must only be applied at the following
points.
K
Front towing eye
If the car has to be towed, first you will have to remove the right
cover of the inferior part of the front bumper, taking out the A
bolt.
Afterwards, you will have to screw in the towing eye located in the
vehicle’s toolbox turning the eye
t to
o tth
he
e lle
ef
ft
twith the wheel wrench
until it is completely screwed in.
To remove the towing eye, turn it
t to
o tth
he
e rri
ig
gh
ht
t with the wheel
spanner. Place it in its housing, inside the vehicle’s tool box.
K
Rear towing eye
The towing eye is located on the right under the rear bumper.K
Tow starting
I It
t iis
s nno
ot
t rre
ec
co
om
mm
me
en
nd
de
ed
d tto
o tto
ow
w sst
ta
ar
rt
t aa vve
eh
hi
ic
cl
le
e.
. WWe
e rre
ec
co
om
mm
me
en
nd
d tth
he
e
u us
se
e oof
f aan
no
ot
th
he
er
r vve
eh
hi
ic
cl
le
e’
’s
s bba
at
tt
te
er
ry
y.
. SSe
ee
e tth
he
e ""E
Em
me
er
rg
ge
en
nc
cy
y sst
ta
ar
rt
ti
in
ng
g"
"
c ch
ha
ap
pt
te
er
r.
.
There are various reasons why a vehicle should not be tow started:
• When towing there is a danger of colliding with the towed
vehicle.
• • IIn
n vve
eh
hi
ic
cl
le
es
s wwi
it
th
h aa ppe
et
tr
ro
ol
l een
ng
gi
in
ne
e,
, ffu
ue
el
l mma
ay
y aac
cc
cu
um
mu
ul
la
at
te
e iin
n tth
he
e
c ca
at
ta
al
ly
ys
st
ts
s
1
1)
)a
an
nd
d cca
au
us
se
e dda
am
ma
ag
ge
e.
.
T Th
he
e ffo
ol
ll
lo
ow
wi
in
ng
g ppo
oi
in
nt
ts
s mmu
us
st
t bbe
e nno
ot
te
ed
d bby
y tth
he
e ddr
ri
iv
ve
er
r oof
f tth
he
e mma
an
nu
ua
al
l
g ge
ea
ar
r vve
eh
hi
ic
cl
le
e bbe
ei
in
ng
g tto
ow
w sst
ta
ar
rt
te
ed
d:
:
• Before moving off, engage 2 2n
nd
d
or 3 3r
rd
d
gear, depress and hold
clutch.
• Switch ignition on.
• Once both vehicles are moving, release the clutch.
• As soon as engine starts, depress clutch and move gear lever
into neutral to avoid running into the towing vehicle.
• • FFo
or
r tte
ec
ch
hn
ni
ic
ca
al
l rre
ea
as
so
on
ns
s tto
ow
w sst
ta
ar
rt
ti
in
ng
g aa vve
eh
hi
ic
cl
le
e wwi
it
th
h aan
n aau
ut
to
om
ma
at
ti
ic
c
g ge
ea
ar
r bbo
ox
x iis
s nno
ot
t ppo
os
ss
si
ib
bl
le
e.
.
K
A
IBN-124Fig. 163
1)Does not apply to vehicles with Diesel engine.

205 If and when
Safety FirstControls and equipment Tips and Maintenance Technical Data
Lifting points for workshop hoist and trolley jackThe vehicle may only be lifted at the points shown in the
illustration
⇒fig. 164, fig. 165.
F Fr
ro
on
nt
t
On the vertical reinforcement of the lower sill.
R Re
ea
ar
r
On the vertical reinforcement of the lower sill.
V Ve
eh
hi
ic
cl
le
e jja
ac
ck
k
Lifting with the vehicle jack is described on page 182.
K
B45-104C
B45-105C
Fig. 164
Fig. 165

207 General notes
T
Te
ec
ch
hn
ni
ic
ca
al
l dda
at
ta
a
G
Ge
en
ne
er
ra
al
l nno
ot
te
es
s
G
Ge
en
ne
er
ra
al
l cco
on
ns
si
id
de
er
ra
at
ti
io
on
ns
s oon
n tte
ec
ch
hn
ni
ic
ca
al
l dda
at
ta
a
Important
U
Un
nl
le
es
ss
s oot
th
he
er
rw
wi
is
se
e iin
nd
di
ic
ca
at
te
ed
d,
, aal
ll
l tte
ec
ch
hn
ni
ic
ca
al
l dde
et
ta
ai
il
ls
s ppr
ro
ov
vi
id
de
ed
d bbe
el
lo
ow
w
a ap
pp
pl
ly
y tto
o vve
eh
hi
ic
cl
le
es
s wwi
it
th
h sst
ta
an
nd
da
ar
rd
d ffi
it
tt
ti
in
ng
gs
s.
.
T Th
he
es
se
e vva
al
lu
ue
es
s mma
ay
y bbe
e ddi
if
ff
fe
er
re
en
nt
t ffo
or
r ssp
pe
ec
ci
ia
al
l vve
eh
hi
ic
cl
le
es
s oor
r vve
eh
hi
ic
cl
le
es
s
d de
es
st
ti
in
ne
ed
d ffo
or
r oot
th
he
er
r cco
ou
un
nt
tr
ri
ie
es
s.
.
P Pl
le
ea
as
se
e bbe
ea
ar
r iin
n mmi
in
nd
d tth
ha
at
t tth
he
e dda
at
ta
a iin
n tth
he
e cca
ar
r’
’s
s oof
ff
fi
ic
ci
ia
al
l ddo
oc
cu
um
me
en
nt
ts
s
t ta
ak
ke
es
s ppr
re
ec
ce
ed
de
en
nc
ce
e.
.
K
Engine data
T
Th
he
e een
ng
gi
in
ne
e ffi
it
tt
te
ed
d iin
n yyo
ou
ur
r vve
eh
hi
ic
cl
le
e iis
s iin
nd
di
ic
ca
at
te
ed
d iin
n tth
he
e dda
at
ta
a ssh
he
ee
et
t
i in
nc
cl
lu
ud
de
ed
d iin
n tth
he
e IIn
ns
sp
pe
ec
ct
ti
io
on
n aan
nd
d MMa
ai
in
nt
te
en
na
an
nc
ce
e PPl
la
an
n aan
nd
d iin
n tth
he
e cca
ar
r’
’s
s
o of
ff
fi
ic
ci
ia
al
l ddo
oc
cu
um
me
en
nt
ts
s.
.
K
Performance
These values were calculated without extra equipment reducing
performance, such as air conditioning, mud flaps, extra wide tyres,
etc.
K
Fuel Consumption
The consumption and emission levels were calculated using the
93/116/CE measuring standards and take into account the true
free-standing weight of the vehicle (weight category). To measure
the fuel consumption the vehicle is tested in two different cycles
on a rolling bench under the following conditions:
•T To
ow
wn
n ddr
ri
iv
vi
in
ng
g
is measured from a cold start of the engine. Then,
driving conditions similar to those of in-town driving are simulated.
•I In
nt
te
er
rc
ci
it
ty
y ddr
ri
iv
vi
in
ng
g
the car is accelerated and braked in all gears,
just as in normal driving. The driving speed varies between 0 and
120 km/h.
•T To
ot
ta
al
l cco
on
ns
su
um
mp
pt
ti
io
on
n
is based on a balanced average of 37% of
town driving and 63% of intercity driving.
•C CO
O
2
2e
em
mi
is
ss
si
io
on
n lle
ev
ve
el
ls
s
are obtained from the exhaust fumes of the
vehicles tested in town and intercity driving on a rolling belt. These
fumes are then analysed and the CO
2emission levels are obtained,
among other values.
N No
ot
te
e
• The consumption and emission levels given in the following tables are
correct for unloaded vehicles with basic fittings. If there are extra
fittings, the empty weight will increase and, as a result, the weight
category, which may slightly increase the consumption and CO
2levels.
Consult a Technical Service Centre to find out the exact specifications of
your vehicle.
• Driving style, road and traffic conditions, weather conditionsand the
condition of the vehicle will, in practice, produce consumption levels
different to those indicated.
K
Safety FirstControls and equipment Tips and Maintenance Technical data

209 Weights and measurements
Safety FirstControls and equipment Tips and Maintenance Technical data
W
We
ei
ig
gh
ht
ts
s aan
nd
d mme
ea
as
su
ur
re
em
me
en
nt
ts
s
F
Fi
ix
xi
in
ng
g ppo
oi
in
nt
ts
s ffo
or
r tto
ow
w bba
ar
r*
*
A4 fixing points
B72 mm
C420 mm (empty vehicle) /
350 mm (fully loaded vehicle)
D958 mm
E413 mm
F166 mm
N No
ot
te
e
For more details refer to the "Trailer towing" chapter.K
D Da
an
ng
ge
er
r oof
f aac
cc
ci
id
de
en
nt
t!
!
T To
o iin
ns
st
ta
al
ll
l tth
he
e tto
ow
w jjo
oi
in
nt
t,
, wwe
e rre
ec
co
om
mm
me
en
nd
d tth
ha
at
t yyo
ou
u vvi
is
si
it
t aa TTe
ec
ch
hn
ni
ic
ca
al
l SSe
er
rv
vi
ic
ce
e
C Ce
en
nt
tr
re
e.
.
W
WA
AR
RN
NI
IN
NG
G
Fig. 166
AB
C
F
A
E
D
CON-006

211 Vehicle identification data
Safety FirstControls and equipment Tips and Maintenance Technical data
Data-carrying adhesive
ABrand
BCountersign for the official approval number
CChassis number
DM.A.W.1)
EM.A.W.1)of vehicle (loaded vehicle)
FM.A.W.1)on front axle
GM.A.W.1)on rear axle
HType
IEmissions coefficientK
VSSZZZ 1MZWB000 149
SEAT S.A.
kg
kg
kg
kg
1-
2-
Ty p
01
1100
4565096
A
B
C
D
E
F
G
HI
TO0-003
1) M Maximum A
Authorized W
Weight
Fig. 169

213 Engine data
Safety FirstControls and equipment Tips and Maintenance Technical data
Maximum authorised weight in kg 1580
Weight in driving order (with driver) in kg 1141/1231
Authorised load on front axle in kg 810
Authorised load on rear axle in kg 830
Authorised load on roof
c)in kg 75
W We
ei
ig
gh
ht
ts
s
Tow without brake on slopes of up to 12% in kg 500
Tow with brake on slopes of up to 12% in kg 800
T To
ow
w wwe
ei
ig
gh
ht
ts
s
Engine oil capacity 3.3 l.
E En
ng
gi
in
ne
e ooi
il
l cca
ap
pa
ac
ci
it
ty
y
c)Maximum roof weight including rack (see the “Roof rack” chapter).
K

215 Engine data
Safety FirstControls and equipment Tips and Maintenance Technical data
Maximum authorised weight in kg 1594
Weight in driving order (with driver) in kg 1150/1251
Authorised load on front axle in kg 815
Authorised load on rear axle in kg 840
Authorised load on roof
c)in kg 75
W We
ei
ig
gh
ht
ts
s
Tow without brake on slopes of up to 12% in kg 500
Tow with brake on slopes of up to 12% in kg 800
T To
ow
w wwe
ei
ig
gh
ht
ts
s
Engine oil capacity 3.5 l.
E En
ng
gi
in
ne
e ooi
il
l cca
ap
pa
ac
ci
it
ty
y
c)Maximum roof weight including rack (see the “Roof rack” chapter).
K