change time Seat Toledo 2005 Maintenance programme

SEAT inspection and maintenance service
7
Under
adverse circumstances
some jobs will be required between these inter-
vals. This is especially true of
changing the engine oil
, when the vehicle is
constantly used for short journeys or th
e temperatures are very low; similarly,
the cleaning or substitution of the cartridge of the air f
ilter, the pollen and
dust filter and the checking and changing of the
drive belt when the vehicle
is used in areas with a lot of dust.If you use biodiesel fuel or fuel which
does not meet the DIN EN 590 standard,
you will have to clean the fuel filt
er every 15,000 km, and substitute it at
30,000 km. Some countries use diesel fuel with a high sulphur
content In these cases, an
oil change will be required after 7,500 km The Author
ised Service Centre will
inform you which countries use fuel with a high sulphur c
ontent.
The person responsible for the Authorised Service C
entre will inform you of
the need to carry out these jobs between the normal servic
e interval, taking
the conditions of use of the vehicle into considerati
on.
On the following pages, we have compiled information on what
is necessary
in each programmed inspection service The jobs
that are listed are appro-
priate for the technical requirements at the time of printin
g. Therefore, they
may be modified hereafte
r for technical reasons.
Your Authorised Service Centre will inform you on
this point, as well as any
need for additional services, and any work required by la
w.
Your Authorised Service Centre will inform you of th
e cost (material and
labour) for each of the inspection and maintenanc
e services contained in this
plan.
Caution
•
Vehicles bearing the sticker “NOT SUITABLE FOR BIODIE
SEL” on the fuel
cap, cannot use biodiesel fuel.
•
Consult an Authorised Service Centre for reliable infor
mation on the
possibility of using biodiesel, in
accordance with DIN EN 14214 (FAME).
s11g.book Seite 7 Montag, 9. Mai 2005 8:41 08

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error
or omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.04.05