CD player SKODA FABIA 2009 2.G / 5J Owner's Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2009, Model line: FABIA, Model: SKODA FABIA 2009 2.G / 5JPages: 259, PDF Size: 31.99 MB
Page 124 of 259

Communication123
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
WARNING
•
If a mobile phone or a two-way radio system is operated in the vehicle 
without using a special external aerial or an external aerial which has been 
incorrectly installed, this can increase the strength of the electromagnetic 
field in the interior of the vehicle.
•
Please concentrate fully at all times on your driving!
•
You must not install two-way radio systems, mobile phones or mounts 
on the covers of the airbags or within the immediate deployment range of 
airbags. This might result in injuries to the occupants in the event of an acci-
dent.Note
Please also refer to the operating instructions of the mobile phones and two-way 
radio systems.Input AUX-IN*The input for external audio sources AUX-IN is located on the right next to the hand-
brake and is marked with 
.
The input AUX-IN transmits audio signals from connected external audio sources 
(e. g. iPod or mp3 player) and record music from these devices via your radio* 
installed in the factory. The input AUX-IN* is only available in combination with a 
radio installed in the factory. The description on how to operate AUX-IN* can be 
found in the relevant operating instructions of the radio*.
Note
If an external audio source is connected via AUX-IN*, which has a separate power 
supply, this can lead to an interference of the audio signals.
CD changer*Operating the CD changer*Loading a CD
– Touch the button   and guide the CD (compact disc) into the CD-
case  . The CD is automatically loaded onto the next free position in 
the CD-changer. The LED in the corresponding button   stops 
flashing.
Load CDs
– Hold the button   pressed for longer than 2 seconds and guide the 
CDs one after the other into the CD-case  . The LEDs in the buttons 
 are no longer flashing.
Loading a CD to one definite position
– Briefly touch the button  . The LEDs in the buttons   light up at the 
memory spaces, which are already assigned and flash in the case of 
free memory spaces.
– Touch the desired button   and guide the CD into the CD-case  .
Fig. 139  The CD changer
AC
AB
AD
AC
AB
AD
AC
AD
AD
AB
s3f4.1.book  Page 123  Thursday, June 18, 2009  11:07 AM