SKODA SUPERB 2016 3.G / (B8/3V) Brief Instructions

›Setting the time›
Switch-on the ignition.›Press and hold the button

until the
Time
is shown in the
display.

› Release the button and the
system switches to the hour
setting function.›
Press the button again and set
the hours.
›
Wait 4 seconds, the system
switches to the minutes set-
ting.
›
Press the button again and set
the minutes.
›
Wait 4 seconds, the system
switches to the initial setting.
› Show the next service appointment›
Switch-on the ignition.›Press and hold the button

until the
Service
menu item is
shown in the display.

› Release the button, the remain-
ing kilometres or miles and days
are shown on the display until
the next service interval for 4 s.9

Starting and stopping the engine›Key
Switching on the ignition
›
Turn key to position
2
.
Starting the engine - Automatic transmission
›
Press the brake pedal and turn the key into the position
3
.
Starting the engine - Manual transmission
›
Press the clutch pedal and turn the key into the position
3
.
Switch off the engine and ignition
›
Turn key to position
1
.
› Starter button
Switching on the ignition
›
Press the



button briefly.
Starting the engine - Automatic transmission
›
Briefly press the brake pedal and the button 


.
Starting the engine - Manual transmission
›
Briefly press the clutch pedal and the button 


.
Switch off the engine and ignition
›
Press the 


button briefly.
10

›START STOP system The basic idea of the START-STOP system is to always turn the engine
off when it does not need to be running. This feature is particularly ad-
vantageous in city traffic, where this significantly reduces fuel con-
sumption and thereby also considerably reduces vehicle running
costs .
When stopping the vehicle, an automatic engine cut-off takes place,
the warning light  appears in the instrument cluster.
When starting up, the automatic start procedure takes place again.
Automatic shutdown / startup on vehicles with manual
transmission
The engine is switched off as soon as the vehicle comes to a halt, the
shift lever is moved into neutral and the clutch pedal is released.
The engine is started as soon as the clutch pedal is depressed.
Automatic shutdown / startup on vehicles with automatic
transmission
The engine is switched off as soon as the vehicle comes to a halt and
the brake pedal is operated.
The motor is started as soon as the accelerator pedal is depressed or,
if the Auto Hold function is deactivated, when the brake pedal is re-
leased.
Functional prerequisites of the START-STOP system
So that an automatic engine shutdown takes place when stopping and
then an automatic start-up process during start-up, the following con-
ditions must be met.
The driver's door is closed.
The driver has fastened the seat belt.
The driving speed was higher than 4 km/h after the last stop.Other conditions cannot be influenced or detected, these are subject
to the state of various vehicle systems and weather conditions. For
this reason, the START-STOP system may react differently in situa-
tions which seem identical from the driver's perspective.
If the conditions for shutdown are not met when the vehicle stops,
then no engine shutdown takes place, the warning light  appears in
the instrument cluster.
If, when an engine is in automatic shutdown, START-STOP system de-
tects that the engine running is essential (e.g. As in the event of an
overloaded vehicle battery), then a premature automatic startup takes
place.
Deactivation of the START-STOP system
The START-STOP system can be temporarily deactivated, by pressing
the button  in the front centre console. After switching the ignition
off and on, re-activation of the START-STOP system always takes
place.
Special conditions
Under certain circumstances, the vehicle can react more slowly than
usual to sudden acceleration, e.g. If the accelerator pedal is depressed
at the time of the automatic engine shutdown.11

Braking and parking›Electric parking brake
Switching on
›
Pull on the

button.
The symbol 
in the button comes on.
Manual shut-down
›
Press the brake pedal and press the 
button.
The symbol 
in the button is no longer illuminated.
Automatic shut-off
During start-up, the brake is automatically switched off.
› Auto Hold function
The Auto Hold function stops the vehicle rolling away during start up.
The safety of the system is displayed by the warning light 
lighting
up in the instrument cluster.
Operating conditions The driver's door is closed.
The engine is running (or has been switched off automatically by
the START-STOP system).
In the case of automatic transmission, the selector lever is not in
position N.
If the driver’s door is opened or the ignition is switched off in a vehicle
which has been secured with Auto Hold, then the parking brake se-
cures the vehicle against unwanted braking.
Then, 
is extinguished and 
illuminates.
Activate/deactivate the function
Activation/deactivation takes place by pressing the button 
.
When the function is activated, the  symbol illuminates in the but-
ton.
12

Park Assist systems›Parking aid
The system draws attention to obstacles in the vicinity of the vehicle
via audible signals and coloured labels in the Infotainment screen.
An obstacle at a distance of less than 30 cm
There is an obstacle in the road
A
(the distance to the obstacle
is greater than 30 cm)
An obstacle is located outside of the road
A
(the distance to the
obstacle is greater than 30 cm)
For vehicles only with sensors built into the rear bumper, the system
activation takes place by engaging reverse gear.
For vehicles with sensors built into the front bumper, system activa-
tion by engaging reverse gear, by pressing the button 
in the front
centre console or automatically when the vehicle approaches an ob-
stacle at a speed below 10 km/h, when driving forwards.
› Reversing camera
For cars with a reversing camera, the area behind the vehicle and the
following orientation lines are displayed in the Infotainment screen
when reversing.
Distance about 40 cm (safety distance limit)
Distance about 1 m
Distance about 2 m
The lane lines terminate approximately 3 m behind the vehicle
System activation takes place by engaging reverse gear or by pressing
the button 
in the front centre console.
ABCD13

›Park Assist
Park Assist helps drivers park in suitable parallel and perpendicular
parking places or also to manoeuvre out of parallel parking spaces.
The system takes over the steering movements only when parking or
leaving a parking space. The driver operates the pedals and the shift
lever/gear selector.
Searching for a parking space
›
Slowly drive past a row of parked vehicles.
›
Press the 
button.
If the system finds a suitable parking space, the note for parking is dis-
played in the instrument cluster.
If the system detects that the parking space found is suitable for par-
allel and transverse parking, a parking method is recommended in the
display and offers the option to change the parking method.
Press the button 
to change the parking method (parallel/ transverse
parking).
A display example of the instructions for parallel parking (displaying
the instructions for the transverse parking takes place in the same
way).
Parking space recognised with the information to drive on
Parking space recognised with the information to reverse
Note for driving forwards
Note for reversing
14

Driver assist systems›Speed regulating system
The Cruise Control System maintains a set speed without you having
to press the accelerator pedal. During control, the warning light 
lights up in the instrument cluster.
Activate CCS (regulation deactivated)Interrupt control (spring-tensioned position)Deactivate cruise controlStart controlling current speed (if not stored)
Resume controlling the set speed (if control is interrupted)
Increase speed (if control is active)Start controlling the current speed
Reduce speed (if control is active)› Adaptive Cruise Control (ACC)
The Adaptive Cruise Control controls the set speed and the distance to
the vehicle ahead without the accelerator or brake pedal being press-
ed.
Deactivate ACCInterrupt control (spring-tensioned position)Activate ACC (control deactivated)Start control (resume)
Increase speed by 1 km/h at a time (spring-tensioned position)Set proximity levelIncrease speed by 10 km/h at a timeStart control
Decrease speed by 1 km/h at a timeDecrease speed (by 10 km/h at a time)15

›Front Assist
The Front Assist system shows a warning of a collision risk with a vehi-
cle or with another obstacle located in front of you, in the display of
the instrument cluster.
In a speed range of 5 km/h to 30 km/h the Front Assist system at- tempts to avoid the collision or lessen its consequences by braking au-
tomatically in the event of an impending crash.
System displays The safe distance to the vehicle in front is below the minimumAutomatic braking in the event of a collision risk (depending on the
type of display, the symbol is displayed in red or white)
Deactivation/Activation can take place in one of the following ways.
› In MAXI DOT display in the
Wizard
menu item.
› In Infotainment in the
 menu
→ 
→
Driver assistance
.
Front Assist is automatically activated each time the ignition is switch-
ed on.
› Lane Assist
The Lane Assist system helps to keep the vehicle in lane.
The system detects the boundary lines of the lane using a sensor.
When the vehicle approaches a detected line between lanes, the sys-
tem makes a light movement of the steering wheel in the opposite di-
rection to the boundary line. This corrective steering intervention can
be manually overridden at any time.
System displays (Display example in colour display)
The system is active, but not ready to intervene.
The system is active and ready to intervene.
The system intervenes when approaching the right-hand boundary
lane.
Adaptive tracking takes place.
Deactivation/Activation can take place in one of the following ways.
› In MAXI DOT display in the
Wizard
menu item.
› In Infotainment in the
 menu
→ 
→
Driver assistance
.
16

At the petrol station›Refuelling›
Press the fuel flap and open it.
›
Loosen the filler cap.
›
Remove the filler cap and place it into the recess on the fuel filler
flap.
›
Insert the pump nozzle into the fuel filler neck as far as it will go, and
refuel.
› Add AdBlue ®›
Press the fuel flap and open it.
›
Loosen the filler cap for AdBlue
®
.
›
Remove the filler cap and place it onto the top of the fuel filler flap.
›
Add AdBlue ®
.
By the warning light 
illuminating in the instrument cluster, the driver
is prompted to refill AdBlue ®
.
Only use AdBlue ®
that corresponds to the standard ISO 22241-1.
17

›Opening the bonnet›
Open the driver door.
›
Pull the release lever underneath the dash panel.
›
Press the unlocking lever underneath the bonnet.
›
Lift the flap so that the gas pressure spring holds it open.
›Engine compartment overview
Coolant expansion reservoir
Engine oil dipstick
Engine oil filler opening
Brake fluid reservoir
Vehicle battery
Windscreen washer fluid reservoir
Engine Oil Specification - Petrol engines
Service intervalSpecificationFixed (QI1 - QI4)VW 502 00Variable (QI6)VW 504 00
Engine oil specification - Diesel engines
Service intervalSpecificationFixed (QI1 - QI4)VW 507 00Variable (QI6)VW 507 00
The service interval that applies to your vehicle is indicated on the ve-
hicle data carrier, which is affixed in the Owner's Manual.
ABCDEF18