SKODA YETI 2011 1.G / 5L Blues Car Radio Manual

www.skoda-auto.com
Blues: Octavia, Octavia Tour, Yeti
Rádio anglicky 11.2011
S00.5610.63.20
1Z0 012 149 CD SIMPLY CLEVER
RADIO BLUES
OWNER'S MANUAL

Table of Contents
General information
. . . . . . . . . . . . . . . . . . . . . . 2
Owner's Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Symbols in the text of the operating instructions . . . 2
Radio - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1
Table of Contents

General information
Owner's Manual This Owner's manual describes
all possible equipment variants without identify-
ing them as special equipment, model variants or market-dependent equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-
nents described in this Owner's manual.
The scope of equipment for your vehicle is described in the sales documentation
you were given when purchasing the car. For more information, contact your local
ŠKODA retailer. Ð
Symbols in the text of the operating instructions Explanation of symbols
Ð
End of a section.
 The section is continued on the next page. Ð
Radio - Overview Control button
–
Switching radio on and off (press)
– Volume control (rotate)
– other function settings in various menus
Rocker switch MENU to call up the menu settings of the parameter for radio
or CD player
Rocker switch  for adjusting the sound
Rocker switch AS to automatically store the station
Rocker switch SCAN to activate the AM radio mode
– fast search in the respective waveband
– Scroll through the contents of the CD
CD - eject button
CD case
Button CD to activate the CD mode
Rocker switch TP to activate the reception of traffic reports
1
2
3
4
5
6
7
8
9 Rocker switch
A/F to switch over between the wavebands AM/FM
Rocker switches 
 ,

 –
manual station finding, fast station finding
– Select the track in the CD mode, fast forward/backward search in the CD
mode
– Selecting the menu points
Display
Station keys 1 -
6 –
store and select the RDS station
– CD selection
– Enter code Ð
Important information Warranty The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, howev-
er, a precondition that the housing has not been damaged and no unauthorised
attempts have been made to carry out repairs. Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential
that there is no external damage. Ð
Operation of radio The radio should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times. 
10 11
12
132
General information

Power output
4x20 W
WARNING
Please concentrate fully at all times on your driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations! Ð
Using the display Carefully handle the display because dents and scratches can occur through pres-
sure of the finger or contact with sharp objects.
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol. Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface. Ð
Anti-theft protection Anti-theft coding Your radio is equipped with a convenience coding. If the radio is being operated
for the first time, the safety code is not only stored in the radio but also in the ve-
hicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a
ŠKODA Service Partner or a
ŠKODA importer.
As the unit only functions after entering the safety code, this practically excludes
its use after a theft - a contribution to increased anti-theft safety. Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessa-
ry. Ð
Enter code –
Switch on the radio if the ignition is on. SAFE
is displayed and then 1000.
– Enter the safety code using the station keys 1 -
4 .
– Confirm the safety code by pressing the station key 6 .
If you have confirmed a wrongly entered code, you can repeat once again the en-
tire process.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter again the safety code after
one hour has expired, when the unit and the ignition have been switched on.
The cycle - two attempts, blocked for an hour - will continue to apply. Ð
Basic setting Switching the unit on and off –
The system is switched on or off by pressing the control button 1 .
If the key is pulled out of the ignition lock while the unit is switched on, the unit
will switch off automatically. You can switch on the unit again by pressing the
control button 1 . If the ignition is switched off, the unit (discharge protection of
the vehicle battery) switches off automatically after approx. one hour.
If you have switched off the radio by withdrawing the ignition key, the radio
switches on again once the ignition is on. Ð
Tone settings –
Press the rocker switch  repeatedly to select the desired parameter.
– Set the desired value by turning the rotary/push knob 1 .
 3
General information

You can select between the following parameters:
●
TRE - Treble setting;
● BASS - bass setting;
● BAL - setting of the volume ratio between the left and the right side;
● FAD - setting of the volume ratio between the front and the rear; Ð
Setting the special functions –
Press the rocker switch MENU , in order to activate the menu Set-up.
– Individual functions of the menu are selected by pressing the rocker switch
MENU or by pressing the rocker switches

 ,

 .
– Set the desired value by turning the button 1 .
REG AUTO / REG OFF
Certain programs of the broadcasting companies are divided into regional pro-
grams at specific times. That is why in individual regions the regional programs of
a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a

“program loss”, the unit
also accepts “related” frequencies.
When opting for REG AUTO the change to a regional “related” station can only be
performed if there is a risk of losing the station. When selecting REG OFF, the re-
ceiver can access the regional “related” stations unlimited.
GALA
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
LOUD
In case of low volume level, the function reinforces the range of bass and treble
frequencies.
BEEP
Switching on or off the tone signal when storing the radio stations. ON VOL
Your radio stores the last volume set before switching off. If the value is higher,
the volume is reduced to the value of the parameter ON VOL after switching on
the radio again.
PHONE
If your vehicle is equipped with a handsfree system, the monophone play function
of the mobile phone calls is carried out via the loudspeakers of the vehicle.
PDC AT
If your vehicle is equipped with

“parking aid”, the volume is automatically de-
creased to a pre-defined value, when the “parking aid” is active.
● PDC AT0 - no volume restriction;
● PDC AT1 - restricts the volume to a middle level;
● PDC AT2 - restricts the volume to a low level;
● PDC AT3 - Mute.
AUX
Setting of the input sensitivity AUX LEV:
● AUX LEV 1 - high level, used in particular for notebooks;
● AUX LEV 2 - middle level, used for cassettes or CD player;
● AUX LEV 3 - low level, used for MP3 player; Note
Each setting change is stored by changing to another menu point. Ð
Radio mode Waveband switch-over Your radio is fitted with the wavebands FM and AM, in order to change, press the
rocker switch
A/F for some considerable time.
In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available, in
order to change, press the rocker switch A/F briefly.
Ð4
General information

The process of searching for and storing the radio stations
Manual search
–
Set the frequency of the desired radio station by pressing the rocker switch or
 .
Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband by
pressing the rocker switch  or
 .
Function SCAN
– The radio station of the current waveband is briefly played (10 seconds) by
pressing the rocker switch SCAN .
– This function is ended by pressing the rocker switch SCAN once again and the
current station is replayed.
Store station
– After selecting the radio station, hold the station key 13 , on which it should be
stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations
– Press the rocker switch AS . An automatic station finding is started during
which the 6 stations with the strongest signal in the memory level FM2 and/or
AM2 are stored. STORE
is displayed on the display. This applies only to the
wavebands FM2 and AM2.
When storing the radio stations on the station keys 13 is finished, you can call up
the desired radio station by pressing a station key 13 .
Note
The stored radio stations of the current waveband are updated and stored once
again by repetitively pressing the rocker switch AS .
Ð
Radio text Certain radio stations transmit additional text information - designated as radio
text. Note
● The text information must not be available to all radio stations.
● Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters. Ð
Traffic reports Activating and deactivating the traffic reports
Press the rocker switch
TP ,
TP appears in the display. If a set radio station does
not transmit a traffic report, the radio searches for a station which transmits the
traffic report. TP SEEK

is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report automatically interrupts the CD play function or listen-
ing to a radio station, which at that moment is not transmitting a traffic report.
INFO and Station name is shown on the display. At the end of the traffic report,
the radio automatically returns to the original play function.
If you wish to deactivate the traffic information, press once again the rocker
switch TP ,
TP goes out on the display. Ð 5
General information

CD player
Using the systemInserting the CD –
Press the button CD , in order to select the source for the play function:
CD
(internal CD drive), EXT
(CD changer, if it is connected to the radio) or AUX.
– Carefully insert a CD into the CD case 7 until it is automatically drawn in. The
play function begins automatically. Ð
Operating the CD player Audio CD: Select track
–
Press the rocker switch  or
 during the play function of the CD, in order to
select the previous and/or the next title.
– Press the rocker switch  or
 for a longer period of time for fast reverse or
forward replay of the track. The play function is continued after releasing the
button.
MP3 Data: Select track
– Press the rocker switch  or
 during the play function of the CD, in order to
select the previous and/or the next title.
– Press the rocker switch  or
 for a longer period of time for fast reverse or
forward replay of the track. The play function is continued after releasing the
button.
– Briefly press the rocker switch  or
 for scrolling in the folders or in the
play lists (if they are present on the CD).
Function SCAN
– Press the rocker switch SCAN , in order to scroll through the CD. The first 10
seconds of each title are played.
– In order to return to the normal mode, press once again the rocker switch
SCAN .
– Press the rocker switch  or
 if you wish to select the previous or the fol-
lowing track. End the play function of the CD
– In order to end the play function of the CD and to activate the radio, press the
rocker switch A/F . The CD remains in the unit.
Ejecting CD
– Press the button 6 , the Cd is ejected.
Display of additional information (MP3 data)
In the display, you can select the display of additional information via the MP3 da-
ta using the station keys 1 -
6 :
● 1 - Number of the folder and number of the track;
● 2 - Name of the track;
● 3 - Name of the performer;
● 4 - Name of the album;
● 5 - Name of the data;
● 6 - Name of the folder.
Note
● If the ejected CD is not removed, it is drawn in again for safety reasons.
● If the radio is functioning in the TP mode before changing to the CD mode, the
play function of the CD is interrupted during the traffic reports and the unit
switches over to the radio mode. After the traffic reports have ended, the unit
switches back once again to the CD mode. Ð
Replay the tracks in random order –
Press the rocker switch MENU , in order to activate the menu Set-up.
– Select a function of the MIX menu with the help of the station keys.
– Set the desired value by turning the button 1 .
MIX
Play function of titles in random order.
● MIX OFF - the function of the menu is switched off;
● MIX CD - Plays the tracks on a CD in random order; 6
CD player

●
MIX FLD - Play function of titles in random order in a certain (folder);
● MIX PLS - Play function of the playlist (folder of selected tracks from individual
folders, which is stored on the CD). Is only displayed when a playlist is created for
the replayed CD. Ð
General information for MP3 operation Requirements for the MP3 data and data carrier
●
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
● The CDs must correspond to the ISO 9660 Level 2 standard as well as the Jo-
liet data system (single and multi-session).
● Data names must be no longer than 64 characters.
● The list structure is restricted to a depth of 8 list levels.
● The name of the artist, the album and the title of the reproduced MP3 data
can be shown as ID3 tag, providing this information is available. The list and data
name will be displayed if there is no ID3 tag.
● Playlists are not supported.
Bit rate (data flow per time unit)
● The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.
● The indicated playing time data with variable bit rates is not reliable. Ð
Information on how to use a CD CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (con-
densation). This can effect the CD jump or impair the play function. In such cases
wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather
from inside to outside with a soft lint-free cloth. In case of severe layers of dirt we
recommend to clean the CD with a commercially available CD cleaner. Also in this
case do not clean the CD in the direction of a circle but rather from inside to out-
side and then let it dry off. Overheating protection
If the temperature in the unit exceeds 85°C, the play function of the CD is ended
for safety reasons. CAUTION
● Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged!
● Never expose the CD to direct sun rays!
● Please never write or affix the CD! Note
Dirt or damage of a CD can lead to difficulties when “reading” the information. The
difficulty in reading the error depends on the dirt or on the severity of the me-
chanical damage. Severe scratches cause reading errors which can make the CD
jump or
“get stuck ”. All CDs must be treated carefully and always be stored in a
protective case. Ð
Input AUX-IN The input for external audio sources AUX-IN is located below the armrest of the
front seats and is marked with the logo


.
Activating an external audio source
– Press the button CD and once again the button
CD in order to select the ex-
ternal input. The play function starts automatically after connecting the exter-
nal source.
End play function of the external source
– Press the rocker switch A/F . It starts the play function of the last selected ra-
dio station.
– Press the button CD and select the CD source for the play function.
An external audio source connected to the AUX-IN socket is merely replayed via
the radio and the loudspeakers. The external audio sources cannot

be controlled
via the radio.
You can select another audio source on the radio at any time. As long as the ex-
ternal audio source is not switched off, it remains always active in the back-
ground.  7
CD player

Please refer to the Owner's manual of the respective manufacturer for the opera-
tion of the external audio source.
Use the standard jack plug 3.5
mm for the AUX-IN socket. If the external audio
source does not have this jack plug, you must use an adapter.
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the vol-
ume control on the radio.
Depending on the connected audio source, the output volume on the external au-
dio source can be changed.
You can also change the input sensitivity of the AUX-IN socket ⇒ page 4 in order
for the play function volume of the external audio source to adapt to other audio
sources or to avoid distortions of the play function volume. WARNING
● On no account place an external audio source on the dash panel. You could
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
● On no account place an external audio source close to the airbags. You
could be thrown back in the passenger compartment by the airbags being de-
ployed and injure the occupants.
● You must not hold the external audio source in the hand or on the knees
while driving. You could make sudden manoeuvres in the passenger compart-
ment and injure the occupants.
● Always guide the connection cable of the external audio source in such a
way that is does not restrict you when driving. CAUTION
The AUX-IN socket must only be used for audio sources! Note
● Your radio has no control over the level setting of the external source. Make
sure that the highest quality is achieved by a suitable combination of input sensi-
tivity and output sensitivity of the external source (volume control). You will find
detailed information for this setting in the operating instructions of the units.
● If an external audio source is connected via AUX-IN, which is equipped with an
adapter for external power supply, it can occur that the audio signal is interrupted.
This depends on the quality of the adapter which is used.
● The loudspeakers in the vehicle are matched to a power output of the radio of
30°W. Ð8
CD player