turn signal SKODA YETI 2011 1.G / 5L Swing Car Radio Manual

Activation of the AM band
Activate the AM band by pressing the
RADIO button for a long time followed by
the AM 12 button. By briefly pressing the button
RADIO , you can select between
the memory levels AM1, AM2 and AM3. Ð
The process of searching for and storing the radio stations Manual search
–
Search the frequency of the desired radio station by turning the menu control
button 2 .
Store station
– After selecting the radio station, hold the station key 12 , on which it should be
stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations
– Press AS . An automatic station finding is started during which the 6 stations
with the strongest signal in the memory level FM3 and/or AM3 are stored.
When storing the radio stations on the station keys 12 is finished, you can call up
the desired radio station by pressing a station key 12 .
Note
The stored radio stations of the current waveband are updated and stored once
again in the memory level FM3 and/or AM3 by repeatedly pressing the button AS .
Ð
Function SCAN The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
– Press the menu control button 2 , the radio searches automatically all availa-
ble stations of the current waveband.
– In order to call up the original radio station, press the station key CANCEL 12 .
– End the automatic finding by pressing the button OK 12 . The current radio sta-
tion remains selected.
– If you wish to select other radio stations, press the button SKIP 12 .
ÐRDS functions Certain radio stations transmit additional text information - designated as radio
text.
–
The information of the radio text is displayed by pressing the button INFO .
Note
● The text information must not be available to all radio stations.
● Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters. Ð
Traffic information function Activating and deactivating the traffic announcements
Press the button
TP ,
TP appears in the display. If a set radio station does not
transmit traffic announcements, the radio searches for a station which transmits
traffic announcements.
An incoming traffic report will automatically interrupt CD playback. At the end of
the traffic announcement, the radio automatically returns to the original play
function.
If you wish to deactivate the reception of traffic announcements, press once again
the button TP ,
TP goes out on the display. Ð 5
General information