brake sensor SSANGYONG MUSSO 1998 Workshop Owner's Manual

TRANSFER CASE (TOD) 5D2-7
1. K-LINE : Communication line for coding and diagnosis with SCANNER.
Classification of Pin No.
ClassificationPin No. Pin NameDescription
Power Supply17,18Ground
TOD control unit ground
4,19Battery
TOD control unit battery supply : (Fuse No 13,20A)
5IgnitionIgnition ON / OFF
27Position 1
Position encoder 1 : check of shift motor position
10Position 2
Position encoder 2 : check of shift motor position
28Position 3
Position encoder 3 : check of shift motor position
30Position 4
Position encoder 4 : check of shift motor position
94H/4L SwitchTransfer case mode input
24Auto T/M Neutral
Check of neutral gear position in Auto T/M
16Speed5V supply (TPS / speed sensor)
11Front Speed
Front speed sensor signal input Signal Input
29Rear Speed
Rear speed sensor signal input
25ABS Operation
ABS ON / OFF
6Position Return
Position encoder ground
13Speed / TPS ReturnGround for speed sensor / TPS
22CAN-LCAN bus low line
23CAN-HCAN bus high line
2,15Motor LO-HIMotor output port
- LO to HI : join with battery
- HI to LO (or motor brake) : join with ground
1,14Motor HI-LO
Motor output port
- HI to LO : join with battery
- LO to HI (or motor brake) : join with ground
3EMCTOD output
Signal Output
214L IlluminationIlluminates “4L” indicator
7Diagnosis Display
4WD check lamp illuminator
- Upon defect ; Ground circuit
20K-LINE1)Diagnosis

9A-10 BODY WIRING SYSTEM
94 Seat Belt Switch (Driver)
95 Seat Belt Switch (Dirver)
96 Parking Brake Switch
97 Rear Cigarette Lighter
9 8 OVPR.................................................................Gasoline E/G
99 LH Side Repeater...............................................Rear Fog Lamp
100 Engine Wiring Connector
101 Engine Joint Connector
102 Engine Joint Connector......................................Gasoline E/G
103 ECS Engine Wiring Connector...........................Diesel E/G & Gasoline E/G with HFM ECU
104 ABD Engine Wiring Connector...........................ABD 5.0
105 ABD Engine Wiring Connector...........................ABD 5.0
105-1ABS Engine Wiring Connector............................ABS 5.0
106 Canister Purge Solenoid Valve...........................Gasoline E/G with MSE ECU
106-1Canister Purge Solenoid Valve...........................E20 & E23 Gasoline E/G with FHM ECU
107 Econo/Standard Solenoid Valve.........................Gasoline E/G with Automatic Transmission
108 CO Potentio Meter..............................................Gasoline E/G with HFM ECU & CO Potentio Meter
109 Front Wiper Motor
11 0 O
2 Sensor...........................................................E20 or E23 Gasoline E/G
111 RH Side Repeater
112 Engine Wiring Connector
113 Vertical Sensor
114 Lateral Sensor
115 Diagnosis
11 6 Joint Box.............................................................Gasoline E/G (E32)
117 Canister Purge Solenoid Valve...........................E32 Gasoline E/G with HFM ECU
118 Led Antenna......................................................Rolling code type Immobilizer
119 E-key Connector................................................Gasoline E/G with Rolling Code Type Immobilizer
120 Receiver Unit......................................................Gasoline E/G with Rolling Code Type Immobilizer
121 Receiver Unit......................................................Gasoline E/G with Rolling Code Type Immobilizer
122 Receiver Antenna..............................................Gasoline E/G with Rolling Code Type Immobilizer
123 Receiver Connector...........................................Gasoline E/G with Rolling Code Type Immobilizer
124 ICU Connector....................................................Gasoline E/G with Rolling Code Type Immobilizer
125 ICU .....................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
126 CAN Line............................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
127 TOD ...................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
128 TOD ...................................................................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
129 Transfer Case Speed Sensor.............................Gasoline E/G with TOD (MSE ECU 3.2 Engine Only)
130 Engine Main Wiring Connector...........................Gasoline E/G with MSE ECU
131 Remote Engine Start..........................................Diesel E/G with A/T & Black Out Lamp
132 Remote Engine Start..........................................Diesel E/G with A/T & Black Out Lamp
133 TCU ....................................................................Diesel E/G with BTRE A/T
134 TCU ....................................................................Diesel E/G with BTRE A/T
135 Ground 5............................................................Diesel E/G
136 Start Protection Relay.........................................Diesel E/G with Rolling Code Type Immobilizer
137 EGR control unit.................................................Diesel E/G
1 3 8 ICU 1..................................................................Diesel E/G with Rolling Code Type Immobilizer
1 3 9 ICU 2..................................................................Diesel E/G with Rolling Code Type Immobilizer
140 Injection Pump Valve Extension..........................Diesel E/G with Rolling Code Type Immobilizer
141 Injection Pump Valve Extension..........................Diesel E/G with Rolling Code Type Immobilizer
142 EGR Solenoid....................................................Diesel E/G
143 ICU led................................................................Diesel E/G with Rolling Code Type Immobilizer
144 Immobilizer Solenoid Valve..................................Diesel E/G with Crypto Type Immobilizer
147 Immobilizer Unit...................................................Diesel E/G with Crypto Type Immobilizer

BODY WIRING SYSTEM 9A-11
ENGINE ROOM
1 Engine Room Relay Box
1.1 Main Wiring Connector
1.2 Main Wiring Connector
1.3 Main Wiring Connector........................................Gasoline E/G
1.4 Joint
1.5 Compressor, Condenser Fan Relay.....................Diesel E/G
1.6 Condenser Fan Relay 2
1.7 Air Conditioner Relay
1.8 Resistor with Diode..............................................Gasoline E/G
1.9 Front Fog Lamp Relay
1.10 Condenser Fan Relay 1
1.11 Tail Lamp Relay
1.12 Horn Relay
2 Octane Selector...................................................Gasoline E/G with HFM
3 Preheating Unit....................................................Diesel E/G
4 Preheating Timer Unit..........................................Diesel E/G
5 ECS Main Wiring Connector................................ ECS
6 Brake Leveling Fluid Sensor
7 ABD Main Wiring Connector................................ABD 5.0
7-1 ABS Main Wiring Connector................................ABD 5.0
8 ABD main Wiring Connector................................ABD 5.0
9 Engine Temperature Sensor................................Diesel E/G
10 ABS 5.0 ECU.......................................................ABS 5.0
10-1ABD 5.0 Modulator...............................................ABD 5.0
11 Front Washer Motor.............................................Diesel E/G
12 Head Lamp Relay
13 Compressor .........................................................Air Conditioner
14 Wheel Speed Sensor...........................................ABS 5.0 or ABD 5.0

9T-4 REMOTE KEYLESS ENTRY AND ANTI-THEFT SYSTEM
6. Buzzer output is as follows.
T1 : 0.3±0.1 sec.
T2 : 0.3±0.1 sec.
T : 0.6±0.2 sec.
Notice
lIn case of checking related devices, diagnosis switch
should always be ON.
lWhen operating the diagnosing related devices, there
will be buzzer sound if it is normal and no buzzer sound
if it is defective.
Self - Diagnosis List
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18Required Condition
Diagnosis switch ON
Battery voltage supply
Operation of battery
and related devices
IGN key insertion
Operation of IGN
and related devices
Operation of IGN and
starting and related
devicesRelated device check (operation)
Confirm the diagnosis function start
Check the battery
Tailgate, rear door lock switch
Driver’s door lock switch
Passenger’s door lock switch
Driver's door switch
Passenger and rear door switch
REKES input
Key reminder switch
IGN and power window relay
Parking brake switch
Seat belt switch
Washer switch
Wiper auto switch
ALT ‘L’
Volume variable switch
Defogger switch
Speed sensor signalNormal output
Buzzer once
Buzzer twice
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
Buzzer once
GN2 buzzer twice,
IGN1 buzzer once,
power window buzzer
3 times
Buzzer once
Buzzer once
Wiper motor parking 3
times, washer switch
once, wiper relay twice
Wiper motor parking 3
times, wiper auto
switch once, wiper
relay twice
Buzzer once
Buzzer once
Buzzer once
Buzzer onceRemark
Diagnosis
Switch ON

9U-10 CONTROL UNITS AND SYSTEM
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
STICS
STICS, electonic control warning device, controls 16 functions and contains the self diagnostic function detecting any
malfunctions in the sensors and load.
Removal & Installation Procedure
1. Disconnector the battery negative cable.
2. Unscrew 4screw from center console box.
3. Remove the center console box and disconnect 3 STICS
connectors.
4. Unscrew 3 fastening bolts and remove the STICS unit.
5. Installation should follow the removal procedure in the
reverse order.
1 STICS Unit
2 STICS Connector3 STICS Unit Fastening Bolt
4 Parking Brake Lever