SSANGYONG NEW ACTYON SPORTS 2012 Service Manual

09-234850-01
Brake Pipe ▶
Master cylinder primary tube assembly
Master cylinder secondary tube assembly
Front tube assembly
Front tube assembly
2-way connector tube assembly
Front brake hose assembly
Front brake hose mounting holder
Flexible hose clip
Caliper eye bolt (19.6~29.4 Nm)
Brake tube mounting clip 1.
2.
3.
4.
5.
7.
8.
9.
11.
12.Brake tube mounting clip
Brake tube mounting holder
Brake tube 2-way connector
Screw
Rear hose 2-way connector
3-way connector hose tube assembly
Rear brake hose assembly
Rear brake hose assembly
Bolt (9.8~11.8 Nm) 13.
14.
20.
21.
22.
24.
25.
26.
27.

09-24
Front/Rear Brake Assembly ▶
Front brake caliper assembly
Front brake pad
Washer
Front caliper mounting bolt
(25.5~30.4 Nm)
Caliper clip set 21.
22.
23.
24.
25. Rear brake caliper assembly
Rear brake pad
Washer
Bolt (52.9~63.7 Nm)
Rear brake disc
Rear disc brake dust shield
Bolt
Rear drum brake assembly
Parking brake shoe
Parking brake repair kit
Rear axle shaft grommet 1.
2.
3.
4.
5.
6.
7.
12.
15.
16.
17.

09-254850-01
Parking Brake ▶
Parking brake lever assembly
Equalizer
Nut (9.8~12.7 Nm)
Front brake mounting bracket
Bolt
Parking brake rear cable assembly
Parking brake rear cable assembly
Bolt (9.8~12.7 Nm)
Parking brake cable retaining ring 1.
3.
4.
5.
6.
10.
11.
12.
13.

09-26
1. OVERVIEW
Even though a driver cuts off the power, while driving, the vehicle continues to move due to the
law of inertia. Therefore, a braking device is needed to stop the vehicle. The brake system
normally uses the frictional discs that converts the kinetic energy to the thermal energy by
frictional operation. The brake system consists of the brake disc (front wheel), brake disc or drum
(rear wheel), parking brake (mechanical type), master cylinder, booster, pedal and supply lines
(pipes and hoses).
Hydraulic Brake ▶
Brake Pedal ▶This system uses the leverage effect and
Pascal's principle. When depressing the
brake pedal, the pedal pressure is increased
by booster and is delivered to master cylinder
to generate hydraulic pressure. The hydraulic
pressure generated by the master cylinder is
delivered to the brake caliper through the
brake pipes or hoses. This hydraulic pressure
pushes the brake calipers, accordingly the
caliper pads are contacted to brake disc to
generate the braking force.
Brake pedal uses the leverage effect to apply
bigger force to the brake master cylinder.

09-270000-00
Braking distance & stopping distance ▶
Stopping distance = free running distance + braking distance
What is stopping distance?
A certain distance (free running distance + braking distance) is needed from the moment an
obstacle appears ahead until you bring your vehicle to a complete stop. This is called as stopping
distance.
What is braking distance?
Tire slip occurs until the vehicle stops completely when the the brake is applied.
This slip is what we call a braking distance.
What is free running distance?
The free running distance is the time from the driver sees the obstacles and begins to prepare for
depressing the brake pedal until the moment the brake pedal is depressed.

09-28
Front Brake AssemblyFront Wheel Speed Sensor (4WD)
HECU
2. SYSTEM LAYOUT
Master Cylinder and Booster
Brake Pedal

09-294850-01
Rear Wheel Speed Sensor (4WD)
Rear Brake Assembly
ABS/EBD Indicators
Parking Brake Lever
Parking Brake

09-30
3. PARKING BRAKE
Front Disc Brake ▶
Brake caliper
Brake hubBrake disc Air breather
Drive shaft
Lower arm ball jointBrake pad
Upper arm connection
2-way piston
Brake caliper
Tie rod end connection
Knuckle
Backing plate
Lower arm connection

09-314850-01
Rear Disc Brake ▶
Brake caliper
Rear shock absorberBrake disc Air breather
Brake hub Brake pad
Brake hose
one-way pistonBrake caliper
Air breather
Backing plate

09-32
4. HYDRAULIC CIRCUIT
Brake booster
Brake fluid reservoir and master cylinder
Front disc brake and caliper 1.
2.
3.HECU (Hydraulic & Electric Control Unit)
Rear disc brake and caliper 4.
5.