Head SUZUKI SWIFT 2000 1.G SF310 Service Owner's Guide

SUZUKI SWIFT 2000 1.G SF310 Service Owner's Guide SWIFT 2000 1.G SUZUKI SUZUKI https://www.carmanualsonline.info/img/20/7602/w960_7602-0.png SUZUKI SWIFT 2000 1.G SF310 Service Owner's Guide

Page 279 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 1. Cylinder head cover
2. Gasket
3. Cylinder head
4. Camshaft housing No.1:
Apply sealant 99000-31110 to mating surface.
5. Camshaft housing No.2
6. Camshaft housing No.3:
Apply sealant 99000-31110 to

Page 280 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide Don’t apply force
6A-16 ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE)
6) Remove camshaft housings from cylinder head.
7) Remove camshaft from cylinder head.
8) Remove valve lash adjuster from cylin

Page 281 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE) 6A-17
INSPECTION
Camshaft journal wear:
Check camshaft journals and camshaft housings for pitting,
scratches, wear or damage.
If any malcondition is fou

Page 282 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide Indicates position from timing belt
side. Install in numerical order
starting from timing belt side.
Indicates direction of housing.
Install so that arrow is directed
toward timing belt side.
6A-18

Page 283 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 2. No.2 housing
3. No.3 housing
3. Rod
4. Shop cloth
ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE) 6A-19
As camshaft housing No.1 (1) retains camshaft in proper
position as to thrust direction, make

Page 284 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 6A-20 ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE)
CAUTION:
Don’t turn camshaft or start engine (i.e., valves should not be operated) for about half an hour after
reinstalling hydraulic valve las

Page 285 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 1. Cylinder head
2. Cylinder head bolt
3. Valve guide
4. Cylinder head gasket:
“TOP” mark provided on
gasket comes to crankshaft
pulley side, facing up
(toward cylinder head side).
5. Pin
6. Camsh

Page 291 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 1. Cylinder block
2. Front oil seal
3. Main bearing
4. Bearing cap
5. Cap washer
6. Cap bolt
7. Timing pulley key
8. Crankshaft
9. Thrust bearing:
Set oil grooves of bearing to weds.
10. Rear oil seal

Page 293 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE) 6A-29
5) Install oil seal housing and its gasket.
Install new gasket. Do not reuse gasket removed in disassem-
bly. Oil lip portion of oil seal before in

Page 295 of 557

SUZUKI SWIFT 2000 1.G SF310 Service Owners Guide 09916-56011
Valve guide installer09917-98221
Valve stem seal installer09918-08210
Vacuum gauge hose joint09919-16010
Deep socket
09924-17810
Flywheel holder09926-18210
Oil seal guide (Vinyl resin)
ENG