TOYOTA AVALON 2008 XX30 / 3.G Navigation Manual

ADVANCED FUNCTIONS
85
A screen similar to that for destination in-
put appears. Input the address of the
marked point in the same way as any des-
tination input. See page 18.
3. Select the “Enter” switch on the
screen and push the “ENTER” button
on the navigation controller.
The screen to register an icon appears a
couple of seconds later.
Select your desired icon.
You can turn the page by selecting
“Page
1” or “Page 2” switch.
INFORMATION
Up to 100 marked points can be regis-
tered.

ADVANCED FUNCTIONS
86
Selecting the “With sound” switch,
select your desired sound. When your
vehicle approaches the marked point,
the sound which you chose will sound.
“Bell (with direction)”: The bell sounds
only when your vehicle approaches to the
marked point from your setting direction.
Operate the select and scroll lever of
the navigation controller, so that the di-
rection is facing to your desired direc-
tion.
Push the
“ENTER” button on the navi-
gation controller and the map screen re-
turns.(b) Editing marked points
Once a marked point is registered, you
can edit the icon, name or telephone
number.
1. Select the
“Marked points”switch.
2. Select the “Edit” switch of the
“Marked points”.

ADVANCED FUNCTIONS
87
The screen lists the marked points.
Sort by “Icon”: Select this switch to list
the marked points in order of the type of
icon.
Sort by “Date”: Select this switch to list
the marked points in order of the registered
date.
Sort by “Name”: Select this switch to list
the marked points in alphabetical order.
Select
switch of the desired marked
point to display the edit marked point
screen.
3. Select the “Change” switch which
you want to edit.CHANGING THE ICON
Select your desired icon.
CHANGING THE NAME
Select alphabet or numeral keys to in-
put the name.
After you finish your entry, select the
“OK” switch on the screen.
The previous screen will be displayed.
CHANGING THE PHONE NUMBER
Select numeral keys.
After you finish your entry, select the
“OK” switch on the screen.
The previous screen will be displayed.

ADVANCED FUNCTIONS
88
EDITING THE LOCATION
(position/map location)
Operate the select and scroll lever to
move the cursor to the desired point
on the map.
Push the
“ENTER” button on the navi-
gation controller when the cursor is at
your desired point.
The previous screen will be displayed.
SHOW NAME
You can set the name of marked point
either to show or not on the screen.
To show the name, select the
“On”switch. Not to show it, select the “Off”switch.(c) Deleting marked points
1. Select the
“Marked points”switch.
2. Select the “Delete” switch of the
“Marked points”.
3. Select switch of the marked
point to delete. If you want to delete all
of the marked points, select the
“De-
lete all” switch.
To delete only specified marked points,
use the sort by
“Icon”, “Date” or“Name” switch to display the screen, so
that you can easily find the marked points.
Messages appear depending on the type
of deletion. If you want to delete, select the
“Yes” switch. To cancel the deletion, se-
lect the “No” switch.

ADVANCED FUNCTIONS
89
(d) Quick marked point registration
You can register your current position
or any points (See “Screen scroll-
ing”on page 56.) from the map screen.
1. Move the cursor
to the desired
point, and if you wish to register that
point, push the
“ENTER” button on
the navigation controller.
2. Select the “Mark” switch.
When you select the “Mark” switch, the
above screen appears for a few seconds,
and then the map screen will be displayed.
To change the icon or name, etc., see “(b)
Editing marked points” on page 86.
You can register up to 100 marked points.
If you attempt to register more than 100, a
message appears for confirmation.
If you want to register a new point, push the
“MENU” button on the navigation con-
troller to display the menu screen and se-
lect the
“Marked points” switch. De-
lete several old points by following the “(c)
Deleting marked points” on page 88.

ADVANCED FUNCTIONS
90
You can set up to 5 destinations before-
hand.
Push the “MENU” button on the navi-
gation controller.
(a) Registering preset destinations
1. Select the
“Marked points”switch.
2. Select the “Register” switch of
“Preset dest.”.
3. Select the 15 switch to register
the preset destination you want.
If you have already registered the preset
destination, you can overwrite on the pres-
ent registered destination.
4. Input the preset destination in the
same way as the destination inputs.
(See pages 22 through 38.)
Preset destinations

ADVANCED FUNCTIONS
91
(b) Editing preset destinations
1. Select the
“Marked points”switch.
2. Select the “Edit” switch of “Preset
dest.”.
3. Select the switch that you want
to edit.
You can change the name, location and
phone No. of the preset destination.
Select the
“Change” switch. (See
page 86.)(c) Deleting preset destinations
1. Select the
“Marked points”switch.
2. Select the “Delete” switch of “Pre-
set dest.”.
3. Select the preset destination that
you want to delete and select the
switch.
Messages appear depending on the type
of deletion. If you want to delete, select the
“Yes” switch. To cancel the deletion, se-
lect the “No” switch.

ADVANCED FUNCTIONS
92
Any areas you want to avoid due to traf-
fic jams, construction work or other
reasons can be registered as avoid
areas.
Push the “MENU” button on the navi-
gation controller and then select the
“Marked points” switch to display
the following screen.
INFORMATION
Some areas and freeways may not
be able to be set as an avoid point.
If the route calculation cannot be
made without running through the
area to avoid, a route passing
through the area to avoid may be
shown.
(a) Registering area to avoid
1. Select the
“Register” switch of
the “Area to avoid”.
2. Enter the location in the same way
as you input any destination or display
the map of the area you want to avoid.
(See pages 22 through 38.)
INFORMATION
Only 10 points can be registered as
area to avoid. If there are 10 points al-
ready registered, the message “Un-
able to register additional points. Per-
form operation again after deleting
unnecessary points.” appears on the
screen.
Area to avoid

ADVANCED FUNCTIONS
93
3. When any of the “detour gauge” at
the left side of the screen is selected, a
box appears around the cursor
. This
is to determine the area to avoid. Select
the “detour gauge” you desire.
When you push the
“ENTER” button on
the navigation controller, the message ap-
pears.
INFORMATION
When the above screen is displayed,
if the map scale is larger than
1/80,000, the message “Position can-
not be specified in this scale. Switch
to more detailed map.” appears on
the screen. Set the map scale, so that
it is more detailed than 1/80,000.
(b) Editing area to avoid
1. Select the
“Edit” switch of the
“Area to avoid” to display the “Edit area
to avoid” screen.
2. Select the area to avoid switch
you want to edit.
3. Select the “Name”, “Location” or
“Change area size” on this screen.

ADVANCED FUNCTIONS
94
CHANGING THE NAME
Select alphabet or numeral keys to in-
put the name.
After you finish your entry, select the
“OK” switch on the screen.
The previous screen will be displayed.
CHANGING THE LOCATION
Move the cursor to your desired point,
and push the “ENTER” button of the
navigation controller.
CHANGING THE AREA SIZE
Select one of the “detour gauge” on the left
side of this screen if you want to change
the area size.(c) Deleting area to avoid
1. Select the
“Delete” switch of the
“Area to avoid” to display the “Delete
area to avoid” screen.
2. Select the area you want to delete
from the list.
“Delete all”: All registered areas to avoid
in the system are deleted.
3. Messages appear depending on the
type of deletion. If you want to delete,
select the
“Yes” switch. To cancel the
deletion, select the “No” switch.