parking brake TOYOTA AYGO 2011 Owners Manual

ix
Table of contents
1 OPERATION OF INSTRUMENTS AND CONTROLSPage
1 Overview of instruments and controls1 .......................
2 Keys and Doors9 .......................................
3 Occupant restraint systems41 .............................
4 Steering wheel and Mirrors111 .............................
5 Lights, Wipers and Defogger11 5 ............................
6 Gauges, Meters and Service reminder indicators123 ............
7 Engine (ignition) switch, Transmission and Parking brake137 .....
8 Audio system161 ........................................
9 Air conditioning system175 ................................
10 Other equipment187 .....................................
2 INFORMATION BEFORE DRIVING YOUR TOYOTA 193........
3 STARTING AND DRIVING 209...............................
4 IN CASE OF AN EMERGENCY 219..........................
5 CORROSION PREVENTION AND APPEARANCE CARE 245...
6 MAINTENANCE REQUIREMENTS 253.......................
7DO−IT−YOURSELF MAINTENANCE
1 Introduction257 .........................................
2 Engine and Chassis263 ..................................
3 Electrical components277 .................................
8 SPECIFICATIONS 291......................................
9 INDEX 303................................................
AYGO WE 99E37E11 02.22

2OVERVIEW OF INSTRUMENTS AND CONTROLS
MS11001b
1. Side vents
2. Tachometer
3. Instrument cluster
4. Center vent5. Rear view mirror remote control levers
6. Power window switches
7. Parking brake lever
8. Manual transmission gear shift lever
or multi−mode manual transmission
shift lever
AYGO WE 99E37E11 02.18
Instrument panel overview
"Left−hand drive vehicles

4OVERVIEW OF INSTRUMENTS AND CONTROLS
MS11003a
1. Hood lock release lever
2. Power window switches
3. Side vents
4. Rear view mirror remote control levers
5. Center vent6. Instrument cluster
7. Tachometer
8. Manual transmission gear shift lever
or multi−mode manual transmission
shift lever
9. Parking brake lever
AYGO WE 99E37E11 02.18
"Right−hand drive vehicles

GAUGES, METERS AND SERVICE REMINDER INDICATORS127
Service reminder indicators and warning buzzers
If the indicator or buzzer
comes on...Do this.
(a)If the parking brake is off stop vehicle immediately and
contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
(b)Fasten driver ’s seat belt.
(c)(indicator and buzzer)Fasten front passenger ’s seat belt.
(d)Stop immediately and contact any authorized Toyota
dealer or repairer, or another duly qualified and equipped
professional.
(e)Stop and check.
(f)Take vehicle to any authorized Toyota dealer or repairer,
or another duly qualified and equipped professional.
(g)Stop and check.
(h)
(indicator and buzzer)
Fill up tank.
(i)Stop and check.
(j)
Take vehicle to any authorized Toyota dealer or repairer,
or another duly qualified and equipped professional, im-
mediately. If the vehicle cannot be driven, contact any
authorized Toyota dealer or repairer, or another duly qual-
ified and equipped professional.
(k)
Take vehicle to any authorized Toyota dealer or repairer,
or another duly qualified and equipped professional. If
brake system warning light is also on, stop immediately
and contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
AYGO WE 99E37E11 02.18

GAUGES, METERS AND SERVICE REMINDER INDICATORS129
(a) Brake System Warning Light
This light comes on in the following cases
when the engine switch is in the “ON”
position.
DWhen the parking brake is applied...
This light comes on for a few seconds
when the engine switch is turned to the
“ON” position even after the parking brake
is released.
DWhen the brake fluid level is low...
CAUTION
It is dangerous to continue driving
normally when the brake fluid level is
low.
Have your vehicle checked at any au-
thorized Toyota dealer or repairer, or
another duly qualified and equipped
professional, in the following cases:
DThe light does not come on even if the
parking brake is applied when the en-
gine switch is in the “ON” position.
DThe light does not come on even if the
engine switch is turned on with the
parking brake released.
A warning light turning on briefly during
operation does not indicate a problem.
CAUTION
If either of the following conditions
occurs, immediately stop your vehicle
at a safe place and contact any au-
thorized Toyota dealer or repairer, or
another duly qualified and equipped
professional.
DThe light does not turn off even
after the parking brake is released
while the engine is running.
In this case, the brakes may not
work properly and your stopping
distance will become longer. De-
press the brake pedal firmly and
bring the vehicle to an immediate
stop.
DThe brake system warning light re-
mains on together with the “ABS”
warning light.
In this case, not only the anti−lock
brake system will fail but also the
vehicle will become extremely un-
stable during braking.
(b) Driver ’s Seat Belt Reminder Light
and Buzzer
The light and buzzer act as a reminder to
buckle up the driver ’s seat belt.
Once the engine switch is turned to “ON”
or “START”, the reminder light flashes if
the driver ’s seat belt is not fastened. Un-
less the driver fastens the belt, the light
continues flashing.
If the vehicle speed rises above 20 km/h
(12 mph) with the seat belt unfastened,
the buzzer will sound for 30 seconds.
Then, if the seat belt is still unfastened,
the buzzer will sound in a different tone
for 90 more seconds. Even if the vehicle
speed drops below 20 km/h (12 mph), the
buzzer will continue to sound. To stop the
buzzer, fasten the seat belt. If the buzzer
still sounds, make sure the front passen-
ger ’s seat belt is fastened.
AYGO WE 99E37E11 02.18

GAUGES, METERS AND SERVICE REMINDER INDICATORS135
CAUTION
If the electric power steering system
warning light comes on, take your ve-
hicle to any authorized Toyota dealer
or repairer, or another duly qualified
and equipped professional, as soon
as possible. In this case, more effort
is required for the steering wheel to
turn than usual. Drive your vehicle
while firmly gripping the steering
wheel.
(o) Light Reminder Buzzer
This buzzer will sound if the driver ’s door
is opened while the engine switch is
turned to the “LOCK” position with the
headlight switch on. Removing the key will
not stop the buzzer as long as the head-
light switch is on.
(p) Warning function of the Multi−mode
manual transmission (Multi−mode
manual transmission only)
When driving, if any incorrect operation
that may cause damage to this system is
performed or if the gear is not shifted as
desired by the driver, the warning buzzer
will sound and the gear position indicator
will blink to warn the driver in some
cases. For details, see “—Warning
functions” on page 154 in Section 1−7.
When the shift lever is shifted to “R”, the
reverse buzzer sounds once. This is to
indicate the shift lever position, not a
malfunction. For details, see “(d) Backing
up” on page 143 or 150 in Section 1−7.CHECKING SERVICE REMINDER
INDICATORS (except the low fuel level
warning light)
1. Apply the parking brake.
2. Turn the engine switch to the “ON”
position, but do not start the engine.
All the service reminder indicators should
come on. The “ABS”, “VSC”, “STOP”, en-
gine coolant temperature, Multi−mode
manual transmission warning lights and
electric power steering system warning
lights go off after a few seconds. The
SRS warning light goes off after 6 sec-
onds.
If any service reminder indicator or warn-
ing buzzer does not function as described
above, have it checked by any authorized
Toyota dealer or repairer, or another duly
qualified and equipped professional, as
soon as possible.
AYGO WE 99E37E11 02.18

ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE137
Section 1−7
OPERATION OF INSTRUMENTS AND
CONTROLS
Engine (ignition) switch, Transmission and Parking
brake
DEngine (ignition) switch 138................................
DMulti−mode manual transmission 139.......................
DManual transmission 156...................................
DTraction control system 157................................
DVehicle stability controlsystem 158..........................
DParking brake 160.........................................
11 02.18
AYGO WE 99E37E

138ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE
Engine (ignition) switch
MS16003c
“START”—Starter motor on. The key
will return to the “ON” position when
released.
For starting tips, see page 209 in Section
3.
“ON”
—Engine on and all accessories on.
This is the normal driving position.“ACC”—Accessories such as the radio
operate, but the engine is off.
“LOCK”—Engine is off and the steering
wheel is locked. The key can be re-
moved only at this position.
When the engine switch is turned from the
“ACC” to the “LOCK” position or 20 sec-
onds have elapsed since the engine
switch is turned from the “ON” to the
“ACC” position, the engine immobilizer
system is automatically set. (See “Engine
immobilizer system” onpage 13 in Section
1−2.)
When starting the engine, the engine
switch may seem stuck at the “LOCK”
position. To free it, first be sure the key
is pushed all the way in, and then rock
the steering wheel slightly while turning
the key gently.
It is not a malfunction if the needles on
all meters and gauges move slightly when
the engine switch is turned to the “ACC”,
“ON” or “START” position.
CAUTION
Never remove the key when the ve-
hicle is moving, as this will lock the
steering wheel and result in loss of
steering control.
NOTICE
Do not leave the engine switch in the
“ON” position if the engine is not
running. The battery will discharge
and the ignition could be damaged.
11 02.18
AYGO WE 99E37E

ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE139
The multi−mode manual transmission is a
5−speed forward/reverse transmission.
With the basic features of the convention-
al manual transmission, the clutch opera-
tion and the transmission gear shift are
controlled electronically in the multi−mode
manual transmission.
The features are as follows:
DAny one of the driving modes, Easy
(E) mode or Manual (M) mode, can be
selected. Since this vehicle controls the
clutch operation in either mode, you do
not need to operate it by yourself.
DIn Easy (E) mode, the vehicle selects
the most appropriate gear position in
accordance with an accelerator pedal
operation and a vehicle speed varia-
tion. See “—Easy (E) mode” on page
141.
DIn Manual (M) mode, by controlling the
clutch operation and transmission gear
shift electronically, the gear position
can be shifted by operation of the shift
lever only. See “—Manual (M) mode”
on page 146.
DWhen starting the engine, always place
the shift lever in the “N” position and
hold down the brake pedal firmly. The
engine cannot be started unless the
shift lever is in the “N” position and
the brake pedal is held down.
DThis vehicle has a starting assist sys-
tem that helps the vehicle to start
smoothly by engaging the clutch. When
the shift lever is in position “M”, “E” or
“R”, the vehicle starts slowly without
depressing the accelerator pedal. The
assisting system is disabled if the
brake pedal is depressed or the park-
ing brake is applied.
DWhen stopping the vehicle, the gear
will be shifted to 1st after the vehicle
speed is reduced to a certain speed.
MS16004b
1. Gear position indicator
2. Shift lever
11 02.18
AYGO WE 99E37E
Multi−mode manual
transmission—

140ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE
MS16005a
The multi−mode manual transmission has
a shift lock system. This is the system to
lock the shift lever in order to hold the
actual transmission gear position consis-
tent with the shift lever when the engine
switch is turned to “ACC” or “LOCK” posi-
tion.
Although the shift locksystem is being
activated, shifting the shift lever from “E”
to “M” (or from “M” to “E”) is allowed.
When the engine switch is “ON” and the
vehicle speed is slower than 9 km/h (5
mph), if the shift lever is in “N” position
and the brake pedal is released for
approximately 2 seconds, the shift lever
will be locked.
When releasing the shift lock, depress the
brake pedal without holding the shift lever.
By this operation, the shift lock will be
unlocked and it enables the driver to
change the gear position using the shift
lever.
Shift lever
“R”:Reverse
“N”:Neutral and engine starting
“E”:Easy mode
“M”:Manual mode“+”:Upshifting
Pull the shift lever to the “+” di-
rection and release it. Every time
the lever is operated, the trans-
mission is upshifted 1 step in the
order of 1st→2nd→3rd→4th
→5th gear.
“−”:Downshifting
Push the shift lever to the “−”
direction and release it. Every
time the lever is operated, the
transmission is downshifted in the
order of 5th→4th→3rd→2nd
→1st gear.
The gear position is displayed on the gear
position indicator. The gear position indica-
tor shows the transmission gear position.
Before starting off, always make sure by
using the gear position indicator that the
gear is engaged in 1st or reverse, then
depress the accelerator pedal.
NOTICE
Do not operate the shift lever if it is
locked. If it is operated, damage to
the system may result. Check that the
shift lever is not locked before oper-
ating the shift lever.
11 02.18
AYGO WE 99E37E