transmission TOYOTA CAMRY V20 1986 Service Information

(c) Slide the gear housing to the RH side to put the LH
tie rod end in the body panel, then pull it out through
the opening in the LH lower side of vehicle body.
HINT: Do not damage the turn pressure tube and the
transmission control cables.
(d) Remove two grommets from the gear housing. 6. REMOVE GEAR HOUSING
(a) Jack up the front of the engine.
NOTICE: Do not overtilt the engine.
(e) Pull out the propeller shaft and insert SST.
SST .09325±20010
(b) Remove the two bolts, two nuts and two brackets.
± STEERINGPower Steering (Gear Housing)SR±47

(d) Pull the gear housing out through the opening in the
LH lower side of vehicle body.
HINT: Do not damage the turn pressure tube and the
transmission control cables.
(e) Remove two grommets from the gear housing. (c) Slide the gear housing to the RH side to put the LH
tie rod end in the body panel.
± STEERINGPower Steering (Gear Housing)SR±50