fuel consumption TOYOTA HILUX 2012 Owners Manual (in English)

185
2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Multi-infor mation display
The multi-information display presents the driver with a variety of
driving-related data including the current outside air temperature.
Trip information (P. 187)
Displays driving range, fuel consumption and other cruising-related
information.
Clock (P. 446)

187 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Display items
Outside temperature display
Average fuel consumption
Current fuel consumption
Average vehicle speedDisplays the outside temperature.
The temperature range that can be displayed is
from -40°C (-40°F) to 50°C (122°F).
Displays the average fuel consumption since the
engine switch is turned to the “ON” position.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the average fuel consumption is displayed.
• Use the displayed average fuel consumption as a
reference.
Displays the current rate of fuel consumption.
Displays the average vehicle speed since the
engine switch is turned to the “ON” position.
The function can be reset by pressing the “RESET”
button for longer than 1 second when the average
vehicle speed is displayed.

188 2-2. Instrument cluster
HILUX_EE (OM0K132E)Elapsed time
Driving range
Compass
P. 454
Display off
A blank screen is displayed.Displays the elapsed time after the engine switch
is turned to the “ON” position.
• When the engine switch is turned on, time is
counted from 0:00. When the time exceeds
19:59, the counter returns to 0:00.
• The function can be reset by pressing the
“RESET” button for longer than 1 second when
the elapsed time is displayed.
Displays the estimated maximum distance that
can be driven with the quantity of fuel remaining.
• This distance is computed based on your aver-
age fuel consumption. As a result, the actual dis-
tance that can be driven may differ from that
displayed.
• When only a small amount of fuel is added to the
tank, the display may not be updated.

189 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
Set up display (if equipped)
Selecting the units
Unit for only the fuel consump-
tion rate can be interchanged.
Switch to the average fuel consumption or current fuel con-
sumption display.
Hold down the “INFO.” button until the unit flashes.
Push the “RESET” button to change the unit.
Push the “INFO.” button.
STEP1
STEP2
STEP3
STEP4

190 2-2. Instrument cluster
HILUX_EE (OM0K132E)
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change:
When the vehicle is stopped, or moving at low speeds (less than 20 km/h
[12 mph])
When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
When “--” is displayed
The system may be malfunctioning. Take your vehicle to any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
When disconnecting and reconnecting battery terminals
The following information data and settings will be reset:
Average fuel consumption
Average vehicle speed
Elapsed time

215 2-4. Using other driving systems
2
When driving
HILUX_EE (OM0K132E)
CAUTION
While driving
Never shift the front drive control lever from H2 to H4 if the wheels are slip-
ping. Stop the slipping or spinning before shifting.
For normal driving on dry and hard surface roads, use H2 position. Driving
on dry and hard surface roads in H4 or L4 position may cause drive com-
ponent oil leakage, seizure, or other problems resulting in an accident.
Further, it may cause tire wear and increased fuel consumption.
Avoid turning suddenly in H4 or L4 position. If you do turn suddenly, the
difference in turning speeds between the front and rear wheels may have
a similar effect to braking, thus making driving difficult.
Securely shift the front drive control lever to H4 or L4. Otherwise, the
transfer may disengage both the front and rear driveshafts from the power-
train and allow the vehicle to move regardless of the shift position. If this
happens, the vehicle may be free to roll even if the automatic transmission
is in P.

238
2-5. Driving information
HILUX_EE (OM0K132E)
Trailer towing
Your vehicle is designed primarily as a passenger carrying vehicle.
Towing a trailer will have an adverse effect on handling, perfor-
mance, braking, durability, and fuel consumption. Your safety and
satisfaction depend on the proper use of correct equipment and cau-
tious driving habits. For your safety and the safety of others, do not
overload the vehicle or trailer.
To tow a trailer safely, use extreme care and drive the vehicle in
accordance with the trailer’s characteristics and operating condi-
tions.
Toyota warranties do not apply to damage or malfunction caused by
towing a trailer for commercial purposes.
Ask your local authorized Toyota dealer or repairer, or another duly
qualified and equipped professional for further details before towing,
as there are additional legal requirements in some countries.
Weight limits
Check the allowable towing capacity, GVM (Gross Vehicle
Mass), MPAC (Maximum Permissible Axle Capacity), and per-
missible draw bar load before towing. (P. 595)
Towing hitch/bracket
Toyota recommends the use of the Toyota hitch/bracket for your
vehicle. Other products of a suitable nature and comparable
quality may also be used.