1999-2000 DRIVE AXLES
Differentials, Axle Shafts & Drive Shafts -- Rear Integral Housing -- RAV4
AXLE RATIO & IDENTIFICATION
Axle ratio may be determined by dividing number of ring gear teeth by number of teeth on drive pinion.
AXLE RATIO SPECIFICATIONS
DESCRIPTION & OPERATION
Drive axle assembly is a hypoid gear-type with integral housing. Drive pinion transfers power to the ring gear
which provides power to the side gear shafts. Side gear shafts are connected to the axle shafts which transfer the
power to the wheels. Drive pinion preload is adjusted using collapsible spacer. Side bearing preload is adjusted
using plate washers.
Rear differential may be a Limited Slip Differential (LSD) or a conventional type rear differential. If equipped
with LSD, manufacturer does not recommend disassembly of differential case.
LUBRICATION
CAPACITY
DIFFERENTIAL FLUID CAPACITY
FLUID TYPE
FLUID TYPE SPECIFICATIONS
TROUBLE SHOOTING
ApplicationRatio
A/T4.404:1
M/T4.933:1
Application(1) Quantity
RAV41 Qt. (.9L)
(1)Approximate quantity listed.
ApplicationFluid Type
Temperature Greater Than 0°F (-18°C)SAE 90W GL-5 Hypoid Gear Oil
Temperature Less Than 0°F (-18°C)SAE 80W-90 GL-5 Hypoid Gear Oil
NOTE: See TROUBLE SHOOTING article in GENERAL INFORMATION.
1999 Toyota RAV4
1999-2000 DRIVE AXLES Differentials, Axle Shafts & Drive Shafts -- Rear Integral Housing -- RAV4
1999 Toyota RAV4
1999-2000 DRIVE AXLES Differentials, Axle Shafts & Drive Shafts -- Rear Integral Housing -- RAV4
Microsoft
Sunday, November 22, 2009 10:09:38 AMPage 1 © 2005 Mitchell Repair Information Company, LLC.
Microsoft
Sunday, November 22, 2009 10:09:42 AMPage 1 © 2005 Mitchell Repair Information Company, LLC.
