lubric TOYOTA RAV4 2006 Service Service Manual

PREPARATION – GF1A TRANSFERPP–65
PP
LUBRICANT
Item Capacity Classification
Transfer oil 0.5 liters (0.5 US qts, 0.4 Imp. qts) API GL-5 SAE 75W-90

PP–72PREPARATION – DIFFERENTIAL
PP
LUBRICANT
Item Capacity Classification
Rear differential oil 0.45 to 0.55 liters (0.48 to 0.58 US qts., 0.40
to 0.48 Imp. qts.)Hypoid gear oil API GL-5 or equivalent

ST–122AZ-FE STARTING – STARTER
ST
REASSEMBLY
HINT:
Use high-temperature grease to lubricate the bearings,
gears, return spring and steel ball when assembling the
starter.
1. INSTALL PLANETARY GEAR
(a) Apply grease to the planetary gears and pin parts of
the planetary shaft.
(b) Install the 3 planetary gears.
2. INSTALL STARTER ARMATURE ASSEMBLY
(a) Apply grease to the plate washer and the armature
shaft.
(b) Install the starter armature to the starter commutator
end frame.
(c) Using snap ring pliers, install the plate washer and a
new snap ring.
(d) Using a vernier caliper, measure length of the snap
ring.
Maximum length:
5.0 mm (0.197 in.)
If the length is greater than the maximum, replace it
with a new snap ring.
3. INSTALL STARTER COMMUTATOR END FRAME
COVER
(a) Install the end frame cover to the commutator end
frame.
A081656E01
A082440E01
A058810E01
A081178

ST–122GR-FE STARTING – STARTER
ST
REASSEMBLY
HINT:
Use high-temperature grease to lubricate the bearings,
gears, return spring and steel ball when assembling the
starter.
1. INSTALL PLANETARY GEAR
(a) Apply grease to the planetary gears and pin parts of
the planetary shaft.
(b) Install the 3 planetary gears.
2. INSTALL STARTER ARMATURE ASSEMBLY
(a) Apply grease to the plate washers and the armature
shaft.
(b) Install the starter armature assembly to the starter
commutator end frame assembly.
(c) Using snap ring pliers, install the plate washer and a
new snap ring.
(d) Using a vernier caliper, measure the length of the
snap ring.
Maximum length:
5.0 mm (0.197 in.)
If the length is greater than the maximum, replace it
with a new snap ring.
3. INSTALL STARTER COMMUTATOR END FRAME
COVER
(a) Install the starter commutator end frame cover to
the starter commutator end frame assembly.
A081656E07
A082440E01
A058810E12
A081178E01