tire pressure reset TOYOTA RAV4 HYBRID 2020 Owners Manual (in English)

1112-1. Instrument cluster
2
Vehicle status information and indicators
els made in Japan* without tire
inflation pressure display func-
tion)
Select to register the ID codes of
the tire pressure s ensors to the tire
pressure warning system.
• “Change Wheel” (for models
made in Japan
* without tire infla-
tion pressure display function)
Select to change the tire pressure
warning system sensor ID code set.
To enable this function, a second
set of tire pressure warning system
sensor ID codes must be registered
by a Toyota dealer. For information
regarding changing the registered
ID code set, contact your Toyota
dealer.
*: The country of production is writ- ten on the Certification Regula-
tion Label. ( P.678)
 “Scheduled Maintenance”
( P.571)
Select to reset the scheduled main-
tenance information (message indi-
cating maintenance is required and
distance until the next mainte-
nance) after all maintenance is per-
formed.
■ Settings
 “Language”
Select to change the language on
the multi-inform ation display.
“Units”
Select to change t he units of mea-
sure displayed.
 “Meter Type” (7-inch display)
Select to change the speedometer
display.
 (EV indicator) ( P.73)
Select to enable/disable the EV
indicator.
 (Driving information dis-
play settings)
Select to set up t he following items.
• “Hybrid System”
Select to enable/disable the ECO
Accelerator Guidance (P.105).
• “Fuel Economy”
Select to change the display on
Fuel Economy ( P.105).
 (Audio settings) (if
equipped)
Select to enable/disable
screen.
 (Vehicle information dis-
play settings)
• “Display Contents”
Select to set up t he following items.
“Energy monitor”:
Select to enable/disable the Energy
monitor ( P.113)
“AWD”:
Select to enable /disable the AWD
system display ( P.108).
• “Drive Info Type”
Select to change the drive informa-
tion type display between trip and
total. ( P.107).
• “Drive Info Items”
Select to set the items on the upper
and lower side of the drive informa-
tion screen from three items, aver-
age speed, distance and total time.
 “Trip Summary”

5997-3. Do-it-yourself maintenance
7
Maintenance and care
ization, it is not necessary to
restart the initialization again as
initialization will restart automati-
cally when the power switch has
been turned to ON for the next
time.
●If you accidentally perform initial-
ization when initi alization is not
necessary, adjust the tire inflation
pressure to the specified level
when the tires are cold, and con-
duct initialization again.
●Vehicles with tire inflation pres-
sure display function only: While
the position of each tire is being
determined and the inflation pres-
sures are not being displayed on
the multi-informatio n display, if the
inflation pressure of a tire drops,
the tire pressure warning light will
come on.
■When initialization of the tire
pressure warning system has
failed (vehicles without tire
inflation pressure display func-
tion)
Initialization can be completed in a
few minutes. However, in the follow-
ing cases, the set tings have not
been recorded an d the system will
not operate prope rly. If repeated
attempts to record tire inflation pres-
sure settings are unsuccessful,
have the vehicle inspected by your
Toyota dealer.
●When operating the tire pressure
warning reset swit ch, the tire pres-
sure warning light does not blink 3
times.
●After driving for a certain period of
time since the initialization has
been completed, the warning light
comes on after blin king for 1 min-
ute.
■If the tire pressure warning sys-
tem is not initialized properly
(vehicles with tire inflation pres-
sure display function)
In the following sit uations, initializa-
tion may take longer than usual to
be completed or may not be possi- ble. Normally, in
itialization com-
pletes within ap proximately 30
minutes.
●Vehicle is not driven at approxi-
mately 25 mph (40 km/h) or more
●Vehicle is driven on unpaved
roads
●Vehicle is driven near other vehi-
cles and system cannot recog-
nize tire pressure warning valve
and transmitters o f your vehicle
over those of other vehicles.
If initialization does not complete
after driving for 1 hour or more, park
the vehicle in a safe place for
approximately 20 minutes and then
drive the vehicle again.
●If the vehicle is reversed during
initialization, the data up to that
point is reset, so p erform the ini-
tialization procedure again from
the beginning.
●In the following situations, initial-
ization will not be started or was
not completed properly and the
system will not oper ate properly.
Perform the initialization proce-
dure again.
• If, when attempting to start initial- ization, the tire pressure warning
light does not blink 3 times.
• If, when the veh icle has been
driven for about 20 minutes after
performing initialization, the tire
pressure warning light blinks for
approximately 1 minute and then
illuminates.
If the inflation pressure of each tire
is still not display ed, have the vehi-
cle inspected by your Toyota dealer.

6027-3. Do-it-yourself maintenance
roads
• Vehicle is driven near other vehi- cles and system cannot recog-
nize tire pressure warning valve
and transmitters of your vehicle
over those of other vehicles
• Wheel with tire p ressure warning
valve and transmitter installed is
inside or near the vehicle
If registration does not complete
after driving for 1 hour or more, per-
form the ID code registration proce-
dure again from the beginning.
●If the vehicle is reversed during
registration, the data up to that
point is reset, so perform the reg-
istration procedure again from the
beginning.
●In the following situations, ID code
registration will not be started or
was not completed properly and
the system will no t operate prop-
erly. Perform the ID code registra-
tion procedure again.
• If, when attempting to start ID code registration, the tire pressure
warning light does not blink slowly
3 times.
• If, when the vehicle has been driven for about 20 minutes after
performing ID co de registration,
the tire pressur e warning light
blinks for approxi mately 1 minute
and then illu minates.
If the ID codes cannot be registered
even when performing the above
procedure, contact your Toyota
dealer.
The recommended cold tire
inflation pressure and tire size
are displayed on the tire and
loading information label.
( P.684)
Tire inflation pressure
Make sure to maintain the
proper tire inflation pres-
sure. Tire inflation pressure
should be checked at least
once per month. However,
Toyota recommends that
tire inflation pressure be
checked once every two
weeks. ( P.684)
Checking the specified
tire inflation pressure

742Alphabetical Index
PKSB (Parking Support Brake)........................................... 299
Power back door switch138, 139
Power door lock switch ........ 132
Power switch ................ 210, 212
Power window switch ........... 176
RCTA ................................... 283
Rear window and outside rear view mirror defoggers switch........................................... 524
Rear window wipe r and washer
switch ................................. 239
Seat heater switches .... 530, 531
Seat ventilator switches ....... 531
Tire pressure warning reset switch ................................. 597
Vehicle-to-vehicle distance switch ................................. 271
VSC OFF switch................... 370
Window lock switch .............. 178
Windshield defogger switch . 524
Windshield wiper de-icer switch ........................................... 526
Windshield wipers and washer switch ................................. 236
T
Tail lights Light switch .......................... 229
Replacing light bulbs ............ 620
Talking on the Bluetooth
®
hands-free system ............... 486 Call screen operation ........... 486
Incoming call waiting ............ 488
Sending tones ...................... 487
Transmit volume setting ....... 487
Theft deterrent system Alarm ...................................... 84
Immobilizer system ................ 81
Tire inflati on pressure
Maintenance data................. 684 Tire inflation pressure display
function ...............................591
Warning light ........................644
Tire information ......................690 Glossary ...............................694
Size ......................................692
Tire identification number .....691
Tire section names ...............692
Tire pressure warning system Function................................591
Initializing..............................597
Installing tire p ressure warning
valves and transmitters ......596
Registering ID codes ............600
Warning light ........................644
Tires .........................................588 Chains ..................................380
Checking ..............................588
Glossary ...............................694
If you have a flat tire .............652
Inflation pressure ..................602
Information ......... ..................690
Replacing .............................652
Rotating tires ........................590
Size ......................................684
Snow tires.............................378
Spare tire ..............................652
Tire identification number .....691
Tire inflation pressure display function ...............................591
Tire pressure warning system ...........................................591
Uniform Tire Qua lity Grading 693
Warning light ........................644
Tools ........................................653
Top tether strap ........................63
Total load capacity .........196, 199
Touch screen ..........................394 Touch screen gestures .........394
Touch screen operation........395
Towing Dinghy towing .......................209