wheel bolts TOYOTA RAV4 HYBRID 2020 Owners Manual (in English)
[x] Cancel search | Manufacturer: TOYOTA, Model Year: 2020, Model line: RAV4 HYBRID, Model: TOYOTA RAV4 HYBRID 2020Pages: 744, PDF Size: 31.43 MB
Page 208 of 744

2084-1. Before driving
4Apply the parking brake 
firmly.
5 Shift into P and turn off the 
hybrid system.
 When restarting after parking 
on a slope:
1 With the transmission in P, 
start the hybrid system. Be 
sure to keep the brake pedal 
depressed.
2 Shift into a forward gear. If 
reversing, shift into R.
3 If the parking brake is in man-
ual mode, release the park-
ing brake. ( P.224)
4 Release the brake pedal, and 
slowly pull or back away from 
the wheel blocks. Stop and 
apply the brakes.
5 Have someone retrieve the 
blocks.
■Break-in schedule
If your vehicle is new or equipped 
with any new power train compo-
nents (such as an engine, transmis-
sion, differential or wheel bearing), 
Toyota recommends that you do not 
tow a trailer unt il the vehicle has 
been driven for over 500 miles (800 
km).
After the vehicle has been driven for 
over 500 miles (800 km), you can 
start towing. However, for the next 
500 miles (800 km), drive the vehi-
cle at a speed of less than 45 mph 
(72 km/h) when towing a trailer, and 
avoid full throttle acceleration.
■Maintenance
●If you tow a trailer, your vehicle 
will require more f requent mainte-
nance due to the additional load.  (See “Scheduled Maintenance 
Guide” or “Owner
’s Manual Sup-
plement”.)
●Retighten the fixing bolts of the 
towing ball and bracket after 
approximately 600 miles (1000 
km) of tra iler towing.
■If trailer sway occurs
One or more factors (crosswinds, 
passing vehicles, rough roads, etc.) 
can adversely affect handling of 
your vehicle and trailer, causing 
instability.
●If trailer swaying occurs:
• Firmly grip the steering wheel.  Steer straight ahead.
Do not try to contr ol trailer sway-
ing by turning the steering wheel.
• Begin releasing the accelerator 
pedal immediately but very gradu-
ally to reduce speed.
Do not increase speed. Do not 
apply vehicle brakes.
If you make no extreme correction 
with the steering or brakes, your 
vehicle and trailer  should stabilize (if 
enabled, Trailer Sway Control can 
also help to stabilize the vehicle and 
trailer.).
●After the trailer swaying has 
stopped:
• Stop in a safe place. Get all occu-
pants out of the vehicle.
• Check the tires of the vehicle and  the trailer.
• Check the load in the trailer. Make sure the load has not 
shifted.
Make sure the tongue weight is 
appropriate, if possible.
• Check the load in the vehicle.
Make sure the vehicle is not over-
loaded after occupants get in.
If you cannot find any problems, the 
speed at which trailer swaying 
occurred is beyond the limit of your 
particular vehicle-trailer combina-
tion. Drive at a lower speed to pre-
vent instability. Remember that  
Page 603 of 744

6037-3. Do-it-yourself maintenance
7
Maintenance and care
Use only Toyota wheel nuts 
and wrenches designed for 
use with your aluminum 
wheels.
 When rotating, repairing or 
changing your tires, check 
that the wheel nuts are still 
tight after driving 1000 miles 
(1600 km).
 Be careful not to damage the 
aluminum wheels when using 
tire chains.
 Use only Toyota genuine bal-
ance weights or equivalent 
and a plastic or rubber ham-
mer when balancing your 
wheels.
WA R N I N G
■When replacing wheels
●Do not use wheels that are a dif-
ferent size from  those recom-
mended in the Owner’s Manual, 
as this may result in a loss of 
handling control.
●Never use an i nner tube in a 
leaking wheel which is designed 
for a tubeless tire. Doing so may 
result in an accident, causing 
death or serious injury.
■When installing the wheel 
nuts
●Be sure to install the wheel nuts 
with the tapered ends facing 
inward. ( P.656) Installing the 
nuts with the tapered ends fac-
ing outward can cause the 
wheel to break a nd eventually 
cause the whee l to come off 
while driving, which could lead 
to an accident res ulting in death 
or serious injury.
●Never use oil or grease on the 
wheel bolts or wheel nuts. Oil 
and grease may cause the 
wheel nuts to be excessively 
tightened, leading to bolt or disc 
wheel damage. In addition, the 
oil or grease can cause the 
wheel nuts to loosen and the 
wheel may fall off, causing an 
accident and resulting in death 
or serious injury. Remove any 
oil or grease from the wheel 
bolts or wheel nuts.
■Use of defective wheels pro-
hibited
Do not use cracked or deformed 
wheels.
Doing so could cau se the tire to 
leak air during driving, possibly 
causing an accident.
NOTICE
■Replacing tire pressure warn-
ing valves and transmitters 
(vehicles with tire pressure 
warning system)
●Because tire repair or replace-
ment may affect the tire pres-
sure warning valves and 
transmitters, make sure to have 
tires serviced by your Toyota 
dealer or other qualified service 
shop. In additio n, make sure to 
purchase your tire pressure 
warning valves  and transmit-
ters at your Toyota dealer.
●Ensure that only genuine Toyota 
wheels are used  on your vehi-
cle.
Tire pressure warning valves 
and transmitters may not work 
properly with non-genuine 
wheels.
Aluminum wheel precau-
tions