fuse TOYOTA T100 1996 Factory Owner's Guide

Downloaded from www.Manualslib.com manuals search engine − BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE−7
1996 TOYOTA T100 (RM449U) A/T Oil temperature warning indicator light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. A/T Oil Temperature Sensor
4. Wire Harness−
BE−36
BE−38
−
SRS warning light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. Center Airbag Sensor Assembly
4. Wire Harness−
BE−36
DI−372
−
Malfunction indicator does not light up
1. Bulb
2. ECM
3. Wire Harness−
−
−
−
Seat belt warning light does not light up
1. Bulb
2. Integration Relay
3. Wiring Harness−
−
−
Discharge warning light does not light up
1. IGN Fuse (Junction Block No.1)
2. Bulb
3. Wire Harness
4. Generator−
−
−
−
Brake warning light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. Parking Brake Switch
4. Brake Fluid Level Warning Switch−
BE−36
BE−38
BE−38
COMBINATION METER
Indicator Lights:
SymptomSuspect AreaSee page
O/D OFF indicator light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. O/D OFF Switch
4. Wire Harness−
BE−36
DI−311
−
High beam indicator light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. Wire Harness
4. Headlight System−
BE−36
−
BE−2
Turn indicator light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. Wire Harness
4. Turn Signal and Hazard Warning System−
BE−36
−
BE−2
Shift indicator lights do not light up (ALL)
1. Bulb
2. Combination Meter Wiring Circuit
3. PNP Switch
4. Wire Harness−
BE−36
DI−306
−
Shift indicator lights do not light up (L, 2, D)
1. Bulb
2. Combination Meter Wiring Circuit
3. PNP Switch
4. Light Control Rheostat
5. Wire Harness−
BE−36
DI−306
BE−38
−
Only one shift indicator does not light up1. Bulb
2. Combination Meter Wiring Circuit−
BE−36

Downloaded from www.Manualslib.com manuals search engine BE−8
− BODY ELECTRICALBODY ELECTRICAL SYSTEM
1996 TOYOTA T100 (RM449U) ndicator lights do not light up (Except. Turn, Hi−beam)
1. GAUGE Fuse (Junction Block No1.)
2. Wire Harness−
−
ABS indicator light does not light up
1. Bulb
2. Combination Meter Wiring Circuit
3. ABS ECU
4. Wire Harness−
BE−36
DI−331
−
POWER WINDOW CONTROL SYSTEM
SymptomSuspect AreaSee page
*1Power window does not operate
1. POWER WINDOW Fuse (Junction Block No.1)
2. GAUGE Fuse (Junction Block No.1)
3. Door Lock Control Relay
4. Ignition Switch
5. Power Window Master Switch
6. Wire HarnessBE−46
BE−46
BE−47
BE−12
BE−47
−
*2Power window does not operate
1. POWER WINDOW Fuse (Junction Block No.1)
2. GAUGE Fuse (Junction Block No.1)
3. Ignition Switch
4. Door Lock Control Relay
5. Power Window Master Switch
6. Wire HarnessBE−46
BE−46
BE−12
BE−47
BE−47
−
”One Touch Power Window System” does not operate1. Power Window Master SwitchBE−47
Only one window glass does not move
1. Power Window Master Switch
2. Power Window Switch
3. Power Window Motor
4. Wire HarnessBE−47
BE−47
BE−47
−
”Window Lock System” does not operate1. Power Window Master SwitchBE−47
”Window Lock Illumination” does not operate1. Power Window Master SwitchBE−47
*1 Power door lock system does not operate
*
2 Power door lock system is normal

Downloaded from www.Manualslib.com manuals search engine − BODY ELECTRICALBODY ELECTRICAL SYSTEM
BE−9
1996 TOYOTA T100 (RM449U)
POWER DOOR LOCK CONTROL SYSTEM
SymptomSuspect AreaSee page
”Door lock control system” does not operate (All)
1. GAUGE Fuse (Junction Block No.1)
2. POWER WINDOW Fuse (Junction Block No.1)
3. Door Lock Control Relay
4. Wire Harness
5. Other PartsBE−50
BE−50
BE−51
−
−
Malfunction in Door Lock / Unlock
(Using door manual switch)
1. Door Lock Manual Switch
2. Wire Harness
3. Door Lock Control Relay
4. Other PartsBE−51
−
BE−51
−
Mulfunction in Door Lock / Unlock
(Using door manual switch and key)1. Wire Harness
2. Other Parts−
−
Mulfunction in Door Lock / Unlock
(Using Key)
1. Door Key Lock and Unlock Switch
2. Wire Harness
3. Door Lock Control Relay
4. Other PartsBE−51
−
BE−51
−
Fault in 2 − Operation unlock function of Driver’s side door key
Lock and Unlock switch
1. Door Key Lock and Unlock Switch
2. Wire Harness
3. Door Lock Control Relay
4. Other PartsBE−51
−
BE−51
−
Fault in key confine prevention operation
1. Key Unlock Warning Switch
2. Door Courtesy Switch
3. Door Lock Switch
4. Wire Harness
5. Door Lock Control Relay
6. Other PartsBE−12
BE−25
BE−51
−
BE−51
−
Only one door lock does not operate1. Door Lock Motor
2. Wire HarnessBE−51
−
POWER MIRROR CONTROL SYSTEM
SymptomSuspect AreaSee page
Power mirror on each side does not operate at all
1. RADIO Fuse (Junction Block No.1)
2. Mirror Switch
3. Mirror Motor (Up/Down or Left/Right Control)
4. Wire HarnessBE−56
BE−57
BE−57
−
Left or Right power mirror does not operate at all
1. Mirror Switch
2. Mirror Motor (Up/Down or Left/Right Control)
3. Wire HarnessBE−57
BE−57
−
Up/Down Control of left or right power mirror does not operate1. Mirror Motor (Up/Down Control)
2. Wire HarnessBE−57
−
Left/Right control of left or right power mirror does not operate1. Mirror Motor (Left/Right Control)
2. Wire HarnessBE−57
−

Downloaded from www.Manualslib.com manuals search engine Z19311
Relay Block
 Headlight Control Relay
*2  Headlight Dimmer Relay
*1  HEAD (RH) Fuse
*2  HEAD (RH−Hi) Fuse
*2  HEAD (RH−Lo) Fuse
*1  HEAD (LH) Fuse
*2  HEAD (LH−Hi) Fuse
*2  HEAD (LH−Lo) Fuse
 DOME Fuse

*1 : USA Models Only
*2 : CANADA Models Only
D.R.L. Daytime Running Light
Headlight *2 D.R.L. Resister
Combination Switch
 Light Control Switch
 Headlight Dimmer SwitchIgnition Switch
D.R.L. Main
Relay
Door Courtesy
Switch
Rear Combination Light
Junction Block No.1
 Taillight Control Relay
*2  D.R.L. No.4 Relay
 Integration Relay
*2  D.R.L. No.4 Fuse
 GAUGE Fuse
 TAIL Fuse
 ECU−B Fuse
BE02Z−03
BE−14
− BODY ELECTRICALHEADLIGHT AND TAILLIGHT SYSTEM
1814 Author: Date:
1996 TOYOTA T100 (RM449U)
HEADLIGHT AND TAILLIGHT SYSTEM
LOCATION

Downloaded from www.Manualslib.com manuals search engine Z16014
Relay Block
 HAZ−HORN Fuse
Front Turn Signal LightRear Combination Light
Hazard Warning Switch
Combination Switch
 Turn Signal SwitchIgnition Switch
Turn Signal Flasher
Junction Block No.1
 TURN Fuse
BE033−04
BE−22
− BODY ELECTRICALTURN SIGNAL AND HAZARD WARNING SYSTEM
1822 Author: Date:
1996 TOYOTA T100 (RM449U)
TURN SIGNAL AND HAZARD WARNING SYSTEM
LOCATION

Downloaded from www.Manualslib.com manuals search engine N12939
Relay Block
 DOME FuseSpot Light Room Light
Door Courtesy Switch
Door Courtesy Switch
Footwell Light
BE035−02
BE−24
− BODY ELECTRICALINTERIOR LIGHT SYSTEM
1824 Author: Date:
1996 TOYOTA T100 (RM449U)
INTERIOR LIGHT SYSTEM
LOCATION

Downloaded from www.Manualslib.com manuals search engine Z15840
Back−up Light Switch
Junction Block No.1
 Back−up Light Relay (A/T)
 GAUGE FuseIgnition Switch
Rear Combination Light
BE037−04
BE−26
− BODY ELECTRICALBACK−UP LIGHT SYSTEM
1826 Author: Date:
1996 TOYOTA T100 (RM449U)
BACK−UP LIGHT SYSTEM
LOCATION

Downloaded from www.Manualslib.com manuals search engine Z15844
Hi−Mount Stop Light
Rear Combination Light
Stop Light Switch
Junction Block No.1
 STOP Fuse
BE039−04
− BODY ELECTRICALSTOP LIGHT SYSTEM
BE−29
1829 Author: Date:
1996 TOYOTA T100 (RM449U)
STOP LIGHT SYSTEM
LOCATION

Downloaded from www.Manualslib.com manuals search engine N06136
ON
OFF
BE1217
Warning Light
Ignition
Switch
Battery
N07797
ONOFF
N13155
Warning Light
Ignition
Switch
Battery
N06137
ON
OFF BE−44
− BODY ELECTRICALCOMBINATION METER
1996 TOYOTA T100 (RM449U)
20. INSPECT PARKING BRAKE SWITCH
(a) Check that there is continuity between terminals with the
switch ON (switch pin released).
(b) Check that there is no continuity between terminals with
the switch OFF (switch pin pushed in).
If operation is not as specified, replace the switch.
21. INSPECT WASHER LEVEL WARNING LIGHT
(a) Disconnect the connectors from the level warning switch
and parking brake switch.
(b) Connect terminals on the wire harness side connector of
the level warning switch connector.
(c) Remove the CHARGE fuse and turn the ignition switch
ON, check that the warning light come on.
If the warning light does not light up, test the bulb.
22. INSPECT WASHER LEVEL SWITCH
(a) Check that there is no continuity between terminals with
the switch OFF (float up).
(b) Check that there is continuity between terminals with the
switch ON (float down).
If operation is not as specified, replace the switch.
23. INSPECT SEAT BELT WARNING LIGHT
(a) Remove the integration relay from the junction block
No.1.
(b) Ground terminal 9 on the junction block side connector.
(c) Turn the ignition switch ON, check that the warning light
lights up.
If the warning light does not light up, inspect the bulb or wire har-
ness.
24. INSPECT BUCKLE SWITCH CONTINUITY
(a) Check that there is continuity between terminals on the
switch side connector with the switch ON (belt unfas-
tened).
(b) Check that there is no continuity between terminals on the
switch side connector with the switch OFF (belt fastened).
If operation is not as specified, replace the seat belt inner.

Downloaded from www.Manualslib.com manuals search engine BE03O−04
N13075
Power Window Master Switch
Ignition Switch
Power Window Switch
Power Window Motor Door Lock Control RelayJunction Block No.1
 GAUGE Fuse
 POWER WINDOW Fuse BE−46
− BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
1846 Author: Date:
1996 TOYOTA T100 (RM449U)
POWER WINDOW CONTROL SYSTEM
LOCATION