clock reset TOYOTA YARIS 2019 Owners Manual (in English)

278
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
●ALC (Automatic v olume adjustment)
The automatic level control (ALC) changes the audio volume auto -
matically according to the vehicle speed. The faster the vehicl e
speed, the higher the volume increases. ALC has ALC OFF and
ALC LEVEL 1 to 7 modes. At ALC LEVEL 7, the amount that the
volume can increase is at the maximum. Select the mode accordin g
to the driving conditions.
● BEEP (Audio operation sound)
The setting for the operation sound when pressing and holding a
button can be changed. The initial setting is ON. Set to OFF to
mute the operation sound.
● BT SETUP mode (if equipped)
Music and other audio such as voice data recorded on portable
audio devices and mobile phones available on the market which
are equipped with the Bluetooth
® transmission function can be lis-
tened to via wireless transmission over the vehicle’s speakers.
Using the BT SETUP mode, these devices can be programmed to
the Bluetooth
® unit or changed ( P. 3 4 1 ) .
● 12Hr< >24Hr (12 Hr/ 24 Hr time adjustment)
Rotating the audio control dial switches the display between 12 and
24-hour clock time ( P. 279).
If not operated for several seconds, the display returns to the previous dis-
play. To reset bass, treble, fade, and balance, press the menu button ( )
for 2 seconds. The unit will beep and “CLEAR” will be displayed .

280
YARIS SEDAN_OM_OM99S50z_(U)
4-2. Audio System
■Time resettingPress the clock button ( ) for about 2 seconds until a beep
is heard.
Press the :00 button (1).
When the button is pressed, the time will be reset as follows:
(Example) 12:01 - 12:29 12:00
12:30 - 12:59 1:00
●When the :00 button (1) is pressed, the seconds will start at “ 00”.
● Switching between 12 and 24-hour clock time:
Press the menu button ( ) several times until 12 and 24-hour clock time
are displayed. Turn the audio control dial in either direction, select the
desired clock setting while the preferred clock time is flashin g.
■
Radio ON
Press a band selector butt on ( ) to turn the radio on.
■Band selection
Successively pressing the band selector button ( ) switches
the bands as follows: FM1FM2 AM.
The selected mode will be indicated.
Operating the Radio
1
2
3
Audio display
Channel preset buttons
Auto memory button Scan button
Band selector button
Tuning button1
2
3
4
5
6