width TOYOTA YARIS GRMN 2017 Owners Manual

2846-3. Do-it-yourself maintenance
YARIS_GRMN_OM_Europe_OM52J40E
Wheels
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width and
inset*.
Replacement wheels are available at any authorized Toyota retailer or
Toyota authorized repairer, or any reliable repairer.
*: Conventionally referred to as “offset”.
Toyota does not recommend using the following:
● Wheels of different sizes or types
● Used wheels
● Bent wheels that have been straightened
● Use only Toyota wheel nuts and wrenches designed for use with
your aluminum wheels.
● When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1600 km (1000 miles).
● Use only Toyota genuine balance weights or equivalent and use a
plastic or rubber hammer when balancing your wheels.
If a wheel is bent, cracked or heavily corroded, it should be
replaced. Otherwise, the tire may separate from the wheel or
cause a loss of handling control.
Wheel selection
Aluminum wheel precautions

3708-1. Specifications
YARIS_GRMN_OM_Europe_OM52J40E
Maintenance data (fuel, oil level, etc.)
*: Unladen vehicles
Dimensions and weights
Overall length 3945 mm (155.3 in.)
Overall width 1695 mm (66.7 in.)
Overall height*1490 mm (58.7 in.)
Wheelbase 2510 mm (98.8 in.)
TreadFront 1470 mm (57.9 in.)
Rear 1455 mm (57.3 in.)
Gross vehicle
mass 1545 kg (3406 lb.)
Maximum
permissible
axle capacity
Front 850 kg (1874 lb.)
Rear 825 kg (1819 lb.)