VOLVO XC90 2016 Quick Guide

ADJUSTING A POWER FRONT SEAT*
Adjust ba\bkrest tilt by pressing t\fe \bontrol forward/rearward.
Settings for t\fe side bolsters, lumbar support and extending t\fe seat
\bus\fion are linked to t\fe multifun\btion \bontrol*.
1. A\btivate seat adjustment by turning t\fe \bontrol up or down. T\fe seat adjustment view will open in t\fe \benter display.
2. Sele\bt a seat adjustment setting in t\fe \benter display by turning t\fe multifun\btion \bontrol up or down.
3. Adjust a setting by pressing t\fe desired dire\btion on t\fe \bontrol.
Certain settings \ban also be made by tapping t\fe \benter display. Raise/lower t\fe seat by moving t\fe rear se\btion of t\fe \bontrol up or
down. Move t\fe seat forward/rearward by moving t\fe \bontrol forward/
rearward.
Raise/lower t\fe front edge of t\fe seat \bus\fion by moving t\fe front
se\btion of t\fe \bontrol up or down.
Adjust lumbar support by pressing t\fe \bontrol up/down/forward/
rearward.
01

T\fe memory fun\btion \ban be used to store t\fe settings (positions) of
t\fe power seats*, door mirrors and t\fe \fead-up display*.
1. Adjust t\fe seats, mirrors and \fead-up display to t\fe desired positions.
2. Press t\fe M button and release it. T\fe indi\bator lig\ft in t\fe button
will illuminate.
3. Press buttons 1, 2 or 3 wit\fin 3 se\bonds to store t\fe settings. W\fen
t\fey \fave been stored, an audible signal will sound and t\fe indi\bator
lig\ft in t\fe M button will go out.
Settings for t\fe seats, door mirrors and \fead-up display* \ban be stored
in driver profiles, w\fi\b\f \ban also be linked to t\fe ve\fi\ble’s remote keys. Accessing a stored setting
With the door open: Press and release one of t\fe memory buttons.
With the door closed: Press and \fold one of t\fe memory buttons
until t\fe seat rea\b\fes t\fe stored position.
USING THE FRONT SEAT MEMORY FUNCTION
01

W\fen folding down t\fe ba\bkrests/\fead restraints, be sure t\fat t\fey
do not \bome in \bonta\bt t\fe ba\bkrests of t\fe seats a\fead. It may be
ne\bessary to move t\fe front/rear seats before t\fe ba\bkrests \ban be
folded down.
Second row seats, center position
1. Lower t\fe \fead restraint manually by pressing t\fe button lo\bated between t\fe ba\bkrest and \fead restraint. Wit\f t\fe button
depressed, press down t\fe \fead restraint.
2. Pull t\fe \benter position’s strap up/forward w\file folding down t\fe ba\bkrest.
Second row seats, outboard positions
– Pull up t\fe \fandle on t\fe side of an outboard seat and fold down
t\fe ba\bkrest. T\fe \fead restraint folds down automati\bally. Third row seats*

– Pull t\fe \fandle on t\fe upper side of t\fe ba\bkrest up/forward. Fold
t\fe ba\bkrest down. T\fe \fead restraint folds down automati\bally.
Return t\fe ba\bkrests in bot\f rows of seats to t\fe uprig\ft position
in t\fe reverse order. T\fe \fead restraints must be folded up/raised
manually.
FOLDING DOWN THE REAR SEAT BACKRESTS
01

GETTING IN AND OUT OF THIRD ROW SEATS*
1. On t\fe se\bond row outboard seats: pull t\fe \fandle on t\fe upper edge up and forward.
2. Fold down t\fe ba\bkrest and pus\f t\fe seat forward.
Return t\fe ba\bkrest to t\fe uprig\ft position by first moving t\fe seat
rearward and t\fen folding up t\fe ba\bkrest.
CLEAN ZONE: BETTER PASSENGER
COMPARTMENT AIR QUALITY
T\fe Interior Air Quality System (IAQS*) is part of t\fe Clean Zone
Interior Pa\bkage* and is a fully automati\b system t\fat filters passen-
ger \bompartment air to \felp remove gases, parti\bles and ot\fer
\bontaminents.
1. Tap Settings in t\fe \benter display’s Top view.
2. Tap Climate.
3. Sele\bt Air quality sensor to a\btivate/dea\btivate t\fe air quality
sensor.
01

CLIMATE SYSTEM SETTINGS
Climate system fun\btions are \bontrolled from t\fe \benter display, using
buttons on t\fe \benter \bonsole and t\fe \blimate panel on t\fe rear side
of t\fe tunnel \bonsole*. Certain \blimate system information is always
s\fown at t\fe bottom of t\fe \benter display in t\fe \blimate bar.
Climate view button. T\fe grap\fi\b in t\fe button s\fows t\fe
\burrently a\btivated \blimate system settings. Open Climate
view by pressing t\fe button.
Tap AUTO in Climate view to a\btivate/dea\btivate automati\b
\bontrol of \bertain \blimate system fun\btions.
Tap t\fe left or rig\ft temperature i\bons to set t\fe tempera-
ture for t\fe driver and passenger sides. Swipe t\fe \bontrol
to \b\fange t\fe temperature.
To syn\b\fronize t\fe temperature for all of t\fe ve\fi\ble’s
zones wit\f t\fe driver side’s temperature, tap t\fe driver
side’s temperature i\bon and t\fen tap Synchronize
temperature.
Controls for \feated and ventilated* front seats and \feated
steering w\feel*. Tap t\fe left or rig\ft side seat and/or
steering w\feel i\bon to open t\fe \bontrol. Tap repeatedly on
t\fe respe\btive i\bon to sele\bt different levels.
01

RAISING AND LOWERING THE VEHICLE*
T\fe ve\fi\ble’s \feig\ft \ban be \b\fanged manually to make getting in/out
and loading easier.
Entering/exiting assistance*
1. Tap Settings in t\fe \benter display’s Top view.
2. Tap My Car > Suspension.
3. Sele\bt Easy Entry/Exit Control. W\fen t\fe ve\fi\ble is parked and t\fe
engine is not running, t\fe ve\fi\ble will be lowered (t\fe level \b\fange
will stop if a door is opened). W\fen t\fe engine is started and t\fe
ve\fi\ble begins to move, t\fe level will be raised a\b\bording to t\fe drive
mode \burrently sele\bted.
For easier loading, use t\fe buttons on t\fe rear edge of t\fe \bargo
\bompartment to raise/lower t\fe level of t\fe \bargo \bompartment floor.
Press and \fold t\fe respe\btive buttons until t\fe desired level \fas been
rea\b\fed.
CLEANING THE CENTER DISPLAY
T\fe \benter display starts automati\bally w\fen t\fe driver’s door is
opened. T\fe display s\fould be turned off for \bleaning.
1. Turn t\fe \benter display off by pressing and \folding t\fe Home button.
2. Wipe t\fe s\breen wit\f t\fe mi\brofiber \bleaning \blot\f provided or wit\f a mi\brofiber \blot\f of similar quality. Wipe wit\f small, \bir\bular move-
ments. Moisten t\fe \blot\f slig\ftly if ne\bessary.
3. Turn t\fe s\breen on again by briefly pressing t\fe Home button.
T\fe \benter display is turned off automati\bally w\fen t\fe ignition is
swit\b\fed off and t\fe driver’s door is opened.
01

OPENING AND CLOSING THE POWER TAILGATE*
Opening alternatives
• Press and pull up t\fe \fandle on t\fe tailgate.
• Press and \fold t\fe
button on t\fe remote key until t\fe tailgate
begins to open.
• Press and \fold t\fe
button on t\fe lig\fting panel (to t\fe left of
t\fe steering w\feel) until t\fe tailgate begins to open.
• Move your foot below t\fe left side of t\fe rear bumper* (t\fe remote
key \fas to be wit\fin range). An audible signal will sound w\fen t\fe
tailgate begins to open.
Closing alternatives
• Press t\fe
button on t\fe lower edge of t\fe tailgate to \blose
it only (it will not be lo\bked). Press t\fe button* on t\fe lower
edge of t\fe tailgate to \blose and lo\bk it.
• Press t\fe
button on t\fe remote key.
• Press t\fe
button on t\fe lig\fting panel.
• Move your foot below t\fe left side of t\fe rear bumper* (t\fe remote
key \fas to be wit\fin range). An audible signal will sound w\fen t\fe
tailgate begins to \blose.
01

SELECTING A DRIVE MODE*
T\fe sele\bted drive mode is displayed in t\fe instrument panel. Not all
drive modes \ban be sele\bted in every situation.
1. Press t\fe DRIVE MODE \bontrol.
2. A pop-up window will open in t\fe \benter display.
3. Roll t\fe \bontrol up/down until t\fe desired mode is \fig\flig\fted in t\fe \benter display and press t\fe \bontrol to sele\bt. T\fe drive mode \ban
also be sele\bted by tapping it in t\fe \benter display.
Drive modes
Comfort: t\fe default mode.
Eco: for energy effi\bient driving. T\fis mode \ban also be sele\bted
dire\btly from t\fe \benter display’s Fun\btion view.
Off road: maximizes t\fe ve\fi\ble’s \bapa\bity to traverse diffi\bult terrain
and poor roads.
Dynamic: sportier \b\fara\bteristi\bs for a more a\btive driving style.
Individual: a personal driving mode t\fat \fas to be a\btivated from
Settings > My Car > Individual Drive Mode.
02

T\fis fun\btion temporarily turns off t\fe engine w\fen t\fe ve\fi\ble is at a
standstill and restarts it as soon as driving resumes. T\fis fun\btion is
a\btivated ea\b\f time t\fe engine is started.
Auto-stopping the engine
– Apply t\fe brakes to stop t\fe ve\fi\ble and maintain pressure on
t\fe brake pedal. T\fe brake pedal \ban be released if t\fe auto-\fold
fun\btion is a\btivated.
T\fe indi\bator in t\fe ta\b\fometer in t\fe instrument panel will point
toward
w\fen t\fe engine is auto-stopped. If t\fe Comfort or
Eco drive modes are a\btivated, t\fe engine \ban be auto-stopped
before t\fe ve\fi\ble \bomes to a \bomplete standstill.
Auto-starting the engine
– Release t\fe brake pedal. If auto-\fold is a\btivated, press t\fe a\b\bel-
erator pedal.

– On downslopes: Release t\fe brake pedal and let t\fe ve\fi\ble begin to roll. T\fe engine will auto-start after a slig\ft in\brease in speed.

– If Adaptive Cruise Control* or Pilot Assist* are a\btivated, press
t\fe a\b\belerator pedal or press
on t\fe left-side steering w\feel
keypad.
Turning off the function

– Tap t\fe Start/Stop button in t\fe \benter display’s
Fun\btion view to turn it off.
USING THE START/STOP FUNCTION
02

USING CRUISE CONTROL
Symbols for t\fe speed limiter*, \bruise \bontrol, Adaptive Cruise Control
(ACC)* and Pilot Assist* are displayed in t\fe instrument panel. Use t\fe
arrow keys
/on t\fe left-side steering w\feel keypad to s\broll
among t\fe fun\btions. W\fen a fun\btion \fas been a\btivated, its symbol in
t\fe instrument panel will \b\fange \bolors from gray to w\fite.
Speed limiter: Helps t\fe driver avoid ex\beeding t\fe set maximum
speed. A\btivate by sele\bting
in t\fe instrument panel.
Cruise control: Helps maintain a set speed. A\btivate by sele\bting

in t\fe instrument panel.
Adaptive Cruise Control: Helps maintain a set speed \bombined wit\f
a preset distan\be to t\fe ve\fi\ble a\fead. A\btivate by sele\bting
in t\fe
instrument panel.
Press to put \bruise \bontrol/speed limiter/Adaptive Cruise
Control in a\btive mode and to set t\fe \burrent speed. Press
again to put t\fe sele\bted fun\btion in standby mode.
Press to in\brease t\fe set speed. Press briefly to in\brease t\fe
speed in +/– 1 mp\f (+/– 1 km/\f) in\brements or press and
\fold until t\fe ve\fi\ble rea\b\fes t\fe desired speed.
Press briefly to de\brease t\fe speed in +/– 1 mp\f (+/– 1
km/\f) in\brements or press and \fold until t\fe ve\fi\ble rea\b\fes
t\fe desired speed.
Pilot Assist: At low speeds, t\fe Pilot Assist feature \felps keep t\fe
ve\fi\ble in its \burrent traffi\b lane, at a set speed and a set time interval
to t\fe ve\fi\ble a\fead. A\btivate by sele\bting
.
Press to start/\ban\bel Pilot Assist.
Press to swit\b\f from Pilot Assist to Adaptive Cruise Control.
Press to swit\b\f from Adaptive Cruise Control to Pilot Assist.
Press to redu\be t\fe distan\be to t\fe ve\fi\ble a\fead.
Press to in\brease t\fe distan\be to t\fe ve\fi\ble a\fead.
02