low oil pressure YAMAHA XMAX 250 2010 Owners Manual

3. Perform the following steps toprotect the cylinder, piston rings,
etc. from corrosion.a Remove the spark plug cap and spark plug.
b Pour a teaspoonful of engine oil into the spark plug bore.
c Install the spark plug cap onto the spark plug, and then
place the spark plug on the
cylinder head so that the
electrodes are grounded.
(This will limit sparking during
the next step.)
d Turn the engine over several times with the starter. (This
will coat the cylinder wall with
oil.)
e Remove the spark plug cap from the spark plug, and then
install the spark plug and the
spark plug cap. WARNING!
To prevent damage or injury
from sparking, make sure
to ground the spark plug
electrodes while turning the
engine over.
[EWA10951]
4. Lubricate all control cables and the pivoting points of all levers and pedals as well as of the
sidestand/centerstand.
5. Check and, if necessary, correct the tire air pressure, and then lift
the scooter so that both of its
wheels are off the ground. Alter-
natively, turn the wheels a little
every month in order to prevent
the tires from becoming degra-
ded in one spot.
6. Cover the muffler outlet with a plastic bag to prevent moisture
from entering it.
7. Remove the battery and fully charge it. Store it in a cool, dry
place and charge it once a
month. Do not store the battery in
an excessively cold or warm pla-
ce [less than 0 °C (30 °F) or more
than 30 °C (90 °F)]. For more
information on storing the bat-
tery, see page 6-24.
TIP
Make any necessary repairs before
storing the scooter.
SCOOTER CARE AND STORAGE
7-4
7

37P-F8199-E0 18/9/09 14:54 Página 76

Operation:Centrifugal automatic type
Chassis:Frame type:Steel tube underbone
Caster angle: 28.00
°Trail:100.0 mm (3.94 in)
Front tire:Type:Tubeless
Size: 120/70-15 56S
Manufacturer/model: MICHELIN/GOLD STANDARD
Manufacturer/model: PIRELLI/GTS23
Rear tire:Type:Tubeless
Size: 140/70-14 68P - 68S
Manufacturer/model: MICHELIN/GOLD STANDARD
Manufacturer/model: PIRELLI/GTS24
Loading:Maximum load:186 kg (410 lb)
Tire air pressure (measured on cold
tires):
Loading condition:0–90 kg (0–198 lb) Front:
190 kPa (1.90 kgf/cm
2, 28 psi, 1.90 bar)
Rear: 220 kPa (2.20 kgf/cm
2, 32 psi, 2.20 bar)
Loading condition: 90 kg - maximum load
Front: 210 kPa (2.10 kgf/cm
2, 30 psi, 2.10 bar)
Rear: 250 kPa (2.50 kgf/cm
2, 36 psi, 2.50 bar)
Front wheel:Wheel type:Cast wheel
Rim size: 15 x MT3.5
Rear wheel:Wheel type:Cast wheel
Rim size: 14 x MT3.75
Front brake:Type:Single disc brake
Operation: Right hand operation
Recommended fluid: DOT 4
Rear brake:Type:Single disc brake
Operation: Left hand operation
Recommended fluid: DOT 4
Front suspension:Type:Telescopic fork
Spring/shock absorber type: Coil spring/oil damper
Wheel travel: 110.0 mm (4.33 in)
Rear suspension:Type:Unit swing
Spring/shock absorber type: Coil spring/oil damper
Wheel travel: 95.0 mm (3.74 in)
Electrical system:Ignition system:TCI (digital)
Charging system: AC magneto
Battery:Model:GTX9-BS
Voltage, capacity: 12 V, 8.0 Ah
Headlight:Bulb type:Halogen bulb
Bulb voltage, wattage x quantity:Low beam headlight:12 V, 55.0 W x 1
High beam headlight: 12 V, 55.0 W x 1
Tail/brake light: 12 V, 5.0 W/21.0 W x 2
SPECIFICATIONS
8-2
8

37P-F8199-E0 18/9/09 14:54 Página 78