light Acura MDX 2003 Owner's Manua

The cargo area (3rd row) light
comes on when any door or the
tailgate is opened if the switch in
the light is in the door activated
(center) position. When the doors
and the tailgate are closed, it can
be turned on with the switch in the
light.The lights go out about six seconds
after all the doors and the tailgate
are closed.
When the switch is in the ON
position:
With the light control switch in the
Door Activated position, all the
individual map lights and the cargo
area light (with the switch in the
center position) come on when you
unlock the door with the remote
transmitter (see page ).
Withanydoororthetailgateleft
open, the lights stay on about three
minutes, then go out. All the individual map lights come
onandstayonaslongasthe
switch remains in the ON position.
The cargo (3rd row) area light
comesonandstaysonif the
switch in the light is in the door
activated (center) position.
95
Interior Lights
Inst rument s and Cont rols129

This light also works with the light
control switch (see page ). The cargo area light has a three-
position switch. In the OFF position,
the light does not come on. In the
center position, it comes on when
you open the tailgate or doors. In the
ON position, it stays on continuously.
Turn on the f ront and second row
individual map lights by pushing the
button next to each light. Push the
button again to turn it off. You can
also operate these lights with the
light control switch (see page ).
128
128
Individual Map L ights
Cargo A rea L ight
Interior Lights
Inst rument s and Cont rols130
FRONTSECOND ROW

The light in the tailgate has an on-of f
switch to control if the light comes
on when the tailgate is opened.The courtesy light in each door
comes on when the door is opened,
and goes out when the door is closed.
Your vehicle also has a courtesy light
in the ignition switch. This light
comesonwhenyouopenthedriver’s
door.
It remains on f or several seconds
af ter the door is closed.
Tailgate Light
Courtesy Lights
Interior Lights
Inst rument s and Cont rols131

...............
Climate Control System . 134
.......
Fully-automatic Operation . 136
.......
Semi-automatic Operation . 137
........
Mode Button/Mode Icon . 139
Sunlight Sensor/ ............
Temperature Sensor . 141
...........................
Rear A/C Unit .142
................................
Audio System .145
AM/FM/Cassette/CD changer ........................
Audio System .145
.................
Operating the Radio . 146
.................
Adjusting the Sound . 149
............
Audio System Lighting . 149
..............................
Digital Clock .150
Operating the Cassette .....................................
Player .151
............
Tape Search Functions . 152
.....
Operating the CD Changer . 155
CD Changer Error .............................
Indications .162
................................
Audio System .163
AM/FM/Cassette/CD Stereo ........................
Audio System .163
.................
Operating the Radio . 164
.................
Adjusting the Sound . 168
............
Audio System Lighting . 169....................
Radio Frequencies . 169
........................
Radio Reception .169
.........
Operating the CD Player . 171
.....
Operating the CD Changer . 173
.......
Protecting Compact Discs . 174
....
CD Player Error Indications . 175
CD Changer Error .............................
Indications .176
Operating the Cassette .....................................
Player .177
............
Tape Search Functions . 178
Caring f or the Cassette .....................................
Player .180
...........
Remote Audio Controls . 181
.......................
Thef t Protection .182
Audio System (Optional on .....................
Touring model) .183
AM/FM/CD/DVD Audio ....................................
System .183
.................
Operating the Radio . 185
.................
Adjusting the Sound . 189
..............................
Digital Clock .190
............
Audio System Lighting . 190
Operating the Cassette .....................................
Player .191
.........
Operating the CD Player . 194 .....
Operating the CD Changer . 196
....
CD Player Error Indications . 197
CD Changer Error .............................
Indications .198
........
Rear Entertainment System . 199
............................
Security System .215
...............................
Cruise Control .216
..............................
Trip Computer .219
.
(Without Navigation System) . 219
HomeLink Universal .................................
Tranceiver .229
.
Rear View Camera and Monitor . 234
Comf ort and Convenience Features
Comf ort and Convenience Feat ures133

Theclimatecontrolsystemhastwo
sensors. A sunlight sensor is located
in the top of the dashboard and a
temperature sensor is next to the
steering column. Do not cover the
sensors or spill any liquid on them. Sunlight Sensor/T emperature
Sensor
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures141
SUNLIGHT SENSORTEMPERATURE SENSOR

CONT INUED
When the system is in FULL AUTO,
the rear A/C passenger control
panel cannot be used. The system
will cycle on and of f automatically to
bring the interior to the set
temperature.To enable the rear A/C passenger
control panel, press the RR A/C
Manual button on the control panel.
The light in the button will come on.
When the rear A/C passenger
control panel is enabled, the
passenger in the second row can use
the rear A/C passenger control
panel to adjust the f an speed and air
flow.
The f an speed control dial changes
the speed of the rear f an; turn it
clockwise to increase fan speed and
air flow.
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures
Rear A/C Passenger Control Panel
Rear A/C Control Button
Fan Speed Cont rol Dial
143
AUTO BUTTON
REAR A/C CONTROL BUTTONTEMPERATURE CONTROL DIAL
MODE BUTTON
FAN SPEED
CONTROL DIAL

µµ
Bass, Treble, Balance, and Fader are
each adjustable. You select which of
these you want to adjust by pressing
the TUNE knob. The mode changes
fromBAStoTREtoFADtoBAL,
and then back to the selected audio
mode, each time you press the
TUNE knob.
Use these modes to
adjust the tone to your liking. Select
TRE or BAS by pressing the TUNE
knob. Adjust the desired mode by
turning the TUNE knob. The level
indicators on the display show you
the range.
These two
modes adjust the strength of the
sound coming f rom each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the f ront-to-back
strength. Select BAL or FAD by pressing the
TUNE knob. Adjust the Balance or
Fader to your liking by turning the
TUNE knob. The level indicators on
the display show you the range.
The system will automatically return
the display to the selected audio
mode about f ive seconds af ter you
stop adjusting a mode with the
TUNE knob.
You can use the instrument panel
brightness control dial to adjust the il-
lumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .
For inf ormation, see page .
82
169
Audio System
Comf ort and Convenience Feat ures
Adjusting the Sound
Treble/Bass
Balance/Fader A udio System L ighting
Radio Frequencies and Reception
149

Û
The ignition switch must be in
ACCESSORY (I) or ON (II).
Make sure the tape opening on the
cassette is facing to the right, then
insert the cassette most of the way
into the slot. The system will pull it
in the rest of the way, and begin to
play.
The tape direction indicator will light
to show you which side of the
cassette is playing. The indicates
thesideyouinsertedfacingupward
is now playing. If you want to play
the other side, press the PROG
button. Dolby noise reduction turns on when
you insert a cassette. If the tape was
not recorded with Dolby noise reduc-
tion, turn it of f by pressing the
button.
Noise reduction remains of f until you
turn it on by pressing the button
again.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
f rom the drive, press the EJECT
button.
You can remove the cassette with
the ignition switch in any position,
even if the audio system is turned of f . If you turn the system of f while a
tape is playing, either with the PWR/
VOL knob or by turning of f the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the tape will begin playing
where it lef t of f .
To switch to the radio or CD
changer while listening to a tape,
presstheAM,FMorCDbutton.To
change back to the cassette player,
press the TAPE button.
Operating the Cassette Player
Audio System
Comf ort and Convenience Feat ures151

µµ
These two
controls adjust the strength of the
sound coming f rom each speaker.
The Balance control adjusts the side-
to-side strength, while the Fader
control adjusts the f ront-to-back
strength.
To adjust the fader, push on the
BASS/FADER control knob to get it
to pop out. Pull it out slightly f arther,
and adjust the f ront-to-back sound to
your liking. Push the knob back in
when you are done so you cannot
change the setting by accidentally
bumping it.
To adjust the balance, push on the
TREBLE/BALANCE control knob
to get it to pop out. Pull it out slightly
f arther, and adjust the side-to-side
sound to your liking. Push the knob
back in when you are done so you
cannot change the setting by
accidentally bumping it. Use these controls
to adjust the tone to your liking.
To adjust the Treble level, push on
the TREBLE/BALANCE control
knob to get it to pop out. Without
pulling it out f arther, turn the knob
to adjust the treble level. Push the
knob back in when you are done so
you cannot change the setting by
accidentally bumping it. To adjust the Bass level, push on the
BASS/FADER control knob to get it
to pop out. Without pulling it out
f arther, turn the knob to adjust the
bass level. Push the knob back in
when you are done so you cannot
change the setting by accidentally
bumping it.
Adjusting the Sound
Balance/Fader
Treble/Bass
Audio System
Comf ort and Convenience Feat ures168
BASS/FADER
CONTROLTREBLE/BALANCE
CONTROL

You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .
Your Acura’s radio can receive the
complete AM and FM bands.
Those bands cover these f requen-
cies:
AM band:
530 to 1,710 kilohertz
FM band:
87.7 to 107.9 megahertz
Radio stations on the AM band are
assigned f requencies at least ten
kilohertz apart (530, 540, 550).
Stations on the FM band are
assigned f requencies at least 0.2
megahertz apart (87.9, 88.1, 88.3).Stations must use these exact
f requencies. It is f airly common f or
stations to round-of f the f requency in
their advertising, so your radio could
display a f requency of 100.9 even
though the announcer may identif y
the station as ‘‘FM101.’’
How well your Acura’s radio receives
stations is dependent on many
f actors, such as the distance f rom
the station’s transmitter, nearby
large objects, and atmospheric
conditions.
A radio station’s signal gets weaker
as you get f arther away f rom its
transmitter. If you are listening to an
AM station, you will notice the sound
volume becoming weaker, and the
stationdriftinginandout.If youare
listening to an FM station, you will
see the stereo indicator f lickering of f
and on as the signal weakens.
Eventually, the stereo indicator willgo of f and the sound will f ade
completely as you get out of range of
the station’s signal.
Driving very near the transmitter of
a station that is broadcasting on a
f requency close to the f requency of
the station you are listening to can
also af f ect your radio’s reception.
You may temporarily hear both
stations,orhearonlythestationyou
are close to.
82
A udio System L ighting
Radio Frequencies
Radio Reception
Comf ort and Convenience Feat ures
Audio System
169