Alfa Romeo Giulietta 2010 Owner handbook (in English)

20
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
DISPLAY
The car may be equipped with a multifunction display/ multi-
function reconfigurable display which, in accordance with the set-
tings made, can display useful information when driving.
With the ignition key removed, the display lights up and shows the
time and total odometer reading (in km or miles) for a few sec-
onds when a door is opened/closed.
MULTIFUNCTION DISPLAY “STANDARD”
SCREEN fig. 6
The following information is shown on the display:
A. Date
B. Odometer (distance covered in km or miles)
C. Driving mode selected using “Alfa DNA” (dynamic control sys-
tem) (for versions/markets, where provided)
– d = Dynamic
– n = Normal
– a = All Weather
D. Time (always displayed, even with the key extracted and the
front doors closed)
E Start&Stop function indicator (for versions/markets, where
provided)
F. Outside temperature
G Gear Shift Indicator (for versions/markets where provided)
H. Headlight alignment position (dipped headlamps on only)
fig. 6A0K1222g
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 20

21
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
RECONFIGURABLE MULTIFUNCTION
“STANDARD” DISPLAY fig. 7
The following information is shown on the display:
A. Time
B. Trip meter (km or miles)
C. Odometer (display of distance travelled in kilometres/miles)
D. State indicator (e.g. doors open, ice on road, etc.)/Start&Stop
function indicator (for versions/markets, where provided)/
Gear Shift Indicator (for versions/markets, where provided)
E. Headlamp alignment position (only with dipped headlamps
on).
F. Outside temperatureThe turbocharger pressure will appear on some versions when
“DYNAMIC” driving mode is selected (see “Alfa DNA system” in
this chapter), fig. 8.
fig. 7A0K0005mfig. 8A0K0006m
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 21

22
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
GEAR SHIFT INDICATOR
The GSI system (Gear Shift Indicator) suggests to shift gear by
showing an indication on the control panel (see fig. 9).
Shifting when indicated by GSI will help the driver save fuel.
For fuel-effective driving, select Normal or All Weather mode and
follow the suggestions of the Gear Shift Indicator where possible.When the SHIFT UP icon (
NSHIFT) appears on the display, the
GSI is suggesting to select a higher gear and when the SHIFT DOWN
(
OSHIFT) icon it is suggesting that a lower gear should be se-
lected.
NOTE The indication on the instrument panel stays on until the
driver shifts or until the driving conditions return to a situation in
which shifting is not required to reduce consumption.
fig. 9A0K0050m
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 22

23
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
WELCOME MOVEMENT
On some versions, the following occurs when the key is turned to
MAR:
❍quick movement (up and down) of the speedometer and rpm
gauge;
❍illumination of graphic symbols/display;
❍an animated graphic representation of the vehicle profile ap-
pears on the display.
Gauge movement
❍If the key is removed from the ignition switch whilst the gauges
are moving, they immediately return to their initial position.
❍Once they have reached the end-of-scale values the gauges rest
on the value indicated by the car.
❍The movement of the gauges stops when the engine is started.
Illumination of graphic symbols/display
A few seconds after the key is inserted, the gauges, graphic sym-
bols and display light up in sequence.
Graphic animation display
When the key is removed from the ignition switch (with the doors
closed), the display remains lit up and shows a graphic animation.
The display illumination is then dimmed gradually until it goes
out completely.
CONTROL BUTTONS fig. 10
Ò▲: To scroll up the screen and the menu options or increase the
displayed value.
“SET ESC”: Briefly press to access the menu and/or go to the next
screen or confirm your choice. Hold down to go back
to the standard screen.
▼: To scroll down the screen and the menu options or decrease
the displayed value.
IMPORTANT Buttons “
Ò▲“and“▼“ activate different func-
tions in the following situations:
❍to scroll the menu options upwards and downwards;
❍to increase or decrease values during settings.
fig. 10A0K0094m
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 23

24
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
The menu includes the following items:
–MENU
– SPEED BEEP
– HEADLIGHT SENSOR (for versions/markets, where provided)
– RAIN SENSOR (for versions/markets where provided)
– ON/TRIP B DATA
– SET TIME
–SETDATE
– FIRST PAGE (for versions/markets where provided)
– SEE RADIO
–AUTOCLOSE
– MEASURES
–LANGUAGE
– ALERTS VOLUME
– BUTTONS VOLUME
– SEAT BELT REMINDER
– SERVICE
– PASSENGER AIR BAG
– DAY LIGHTS
– COURTESY LIGHTS
–MENUEXIT
NOTE Some menu items are shown on the navigator display in mod-
els equipped with radio-navigation systems (for versions/markets,
where provided).SETUP MENU
The menu comprises a series of items which can be selected us-
ing the “
Ò▲“and“▼“ buttons to access the different se-
lection and setting operations illustrated in the following paragraphs.
Some items also have a sub-menu.
The menu can be activated by briefly pressing the SET ESC but-
ton.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 24

25
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Selecting an option from the main
menu without a submenu:
– briefly press SET ESC to select the main menu option you wish
to set;
– repeatedly press “
Ò▲“or“▼“ to select the new setting;
– press the SET ESC button to store the new setting and go back
to the previous main menu option.
Selecting an option from the main menu with
a submenu:
– press the SET ESC button to display the first submenu option;
– repeatedly press “
Ò▲“or“▼“ to scroll through all the sub-
menu options;
– briefly press the SET ESC button to select the displayed submenu
option and open the relevant setup menu;
– repeatedly press “
Ò▲“or“▼“ to select the new setting
of this submenu item;
– briefly press the SET ESC button to store the new setting and
go back to the previous submenu option.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 25

26
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
MENU ITEMS
Menu
This item is used access the Setup Menu.
Press “
Ò▲“or“▼“ to select the various menu items.
Hold down the SET ESC button to return to the standard screen.
Speed warning (speed limit)
With this function is possible to set the car speed limit (km/h or
mph); when this limit is exceeded the driver is alerted. To set the
desired speed limit, proceed as follows:
– briefly press the SET ESC button: the display shows the words
Speed Beep;
– press button “
Ò▲“or“▼“ to activate (On) or deactivate
(Off) the speed limit;
– if the function is on, press “
Ò▲“or“▼“toselectthere-
quired speed limit and then press SET ESC to confirm;IMPORTANT Setting is possible between 30 and 200 km/h, or 20
and 125 mph, according to the previously stored unit. See the
“Measures” paragraph described below. The setting will in-
crease/decrease by five units each time button
Ò▲/▼is
pressed. Hold down
Ò▲/▼button to increase/decrease
the setting rapidly. Complete the setting by repeatedly pressing the
button when you approach the required value.
– briefly press the SET ESC button to go back to the menu screen
or hold the button to go back to the standard screen without sav-
ing.
To cancel the setting, proceed as follows:
– briefly press the SET ESC button: ON flashes in the display;
–press
▼button: OFF flashes in the display;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 26

27
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Headlight sensor (Automatic headlight/dusk
sensor sensitivity adjustment)
(for versions/markets, where provided)
This function is used to turn the headlights on or off according to
external lighting conditions.
The dusk sensor sensitivity can be adjusted according to 3 levels
(level 1= minimum sensitivity, level 2= average sensitivity, level
3= maximum sensitivity); the greater the sensitivity set, the less
the external light variation needed to control turning on the lights
(e.g. with a setting on level 3 at sunset the headlights are expected
to come on in relation to levels1 and 2).
Proceed as follows to set:
– briefly press SET ESC: the previously set brightness level flash-
es in the display;
– press “
Ò▲“or“▼“ to select;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
Rain sensor (sensitivity adjustment)
(for versions/markets where provided)
This function is used to adjust the rain sensor sensitivity to four
levels.
To set the required sensitivity level, proceed as follows:
– briefly press SET ESC button: the previously set sensitivity level
will flash on the display;
–press“
Ò▲“or“▼“toselect;
– press the SET ESC button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 27

28
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
On/Trip B data (trip B on)
With this function is possible to turn the Trip B display (trip me-
ter) on and off. For more information see the “Trip computer” para-
graph.
For activation/deactivation, proceed as follows:
– briefly press the SET ESC button again: the display flashes On
or Off depending on what was previously set;
– press “
Ò▲“or“▼“ to select;
– briefly press the SET ESC button to go back to the menu screen
or hold the button down to go back to the standard screen with-
out saving.
Set time (Clock)
With this function is possible to set the clock through two sub-
menus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
– briefly press SET ESC button: the display shows the two sub-
menus “Time” and “Format”;
–press“
Ò▲“or“▼“ to go from one submenu to the next;
– once you have selected a submenu, briefly press SET ESC;
- when accessing the “Time” submenu: brefly pressing SET ESC
button: the minutes flash in the “time” mode;
–press“
Ò▲“or“▼“ to select;
– brefly press SET ESC button: “the minutes” flash in the dis-
play;
–press“
Ò▲“or“▼“ to select.
IMPORTANT The setting will increase or decrease by one unit each
time “
Ò▲“or“▼“ is pressed. Hold the button down to in-
crease/decrease the setting rapidly. Complete the setting by re-
peatedly pressing the button when you approach the required set-
ting.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 28

29
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
– when accessing the “Format” submenu: briefly press button
SET ESC: the previously set display format will flash on the display;
–press“
Ò▲“or“▼“ to select the “24h” or “12h” mode.
When you have made the required adjustments, briefly press SET
ESC button to go back to the submenu screen or hold the button
down to go back to the main menu screen without saving.
– press SET ESC button again to go back to the standard screen
or main menu, depending on which point in the menu you have
reached.
Set date
With this function is possible to change the date (day - month -
year).
To update, proceed as follows:
– briefly press SET ESC button: the “year” flashes on the display;
–press“
Ò▲“or“▼“ button to select;
– briefly press SET ESC: the “month” flashes on the display;
–press“
Ò▲“or“▼“toselect;
– briefly press SET ESC: the “day” flashes on the display;
–press“
Ò▲“or“▼“ button to select.
IMPORTANT The setting will increase or decrease by one unit each
time “
Ò▲“or“▼“ button is pressed. Hold the button down
to increase/decrease the setting rapidly and automatically. Com-
plete the setting by single pressing the button when you approach
the required value.
– press the SET ESC button to go back to the menu screen or
hold the button down to go back to the standard screen without
saving.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 29