AUDI A5 CABRIOLET 2014 Owners Manual

Hill descent control
Applies to vehicles: with multitronic/S tronic/tiptronic
The hill descent control system assists the
driver when driving down declines.
Hill descent control is activated when these­
lector lever is in D/S and you press the brake
pedal. The transmission automatically selects
a gear that is suitable for the incline . Hill de­
scent control tries to maintain the speed ach­
ieved at the time of braking, within physical
and techn ica l limitations. It may still be nec­
essary to adjust the speed with the brakes.
H ill descent control switches
off once the de­
cline levels out or you press the accelerator
pedal.
On vehicles w ith the cruise control system*
¢ page 83, hill descent control is also activat­
ed when the speed is set.
.&, WARNING
Hill descent control cannot overcome
physical limitations, so it may not be able
to maintain a constant speed under all
conditions. Always be ready to app ly the
brakes.
Manual shift program
App lies to vehicles: with multitronic/S tronic/tiptronic
Using the manual shift program you can
manually select gears.
F ig. 99 Center console: shifting t he gea rs manually
Transmission 89
Fig . 100 Stee ring whee l: Shift buttons*
Gear selection with selector lever
The tiptronic mode can be selected either with
the vehicle stat ionary or on the move .
.,. Push the se lector lever to the right from D/
5. An M appears in the instrument cluster
display as soon as the transmission has
shifted .
.,. To upshift, push the selector lever forward
to the plus position
0 ¢ fig. 99 .
.,. To downshift, push the lever to the minus
position
0 .
Gear selection with paddle levers*
The shift buttons are activated when these ­
l ector lever is in D/S or the tiptronic manual
shift program.
.,. To upshift, touch the button on the right
0
¢ fig. 100 .
.,. To downshift, touch the button on the left
0 .
.,. If you do not press a sh ift button within a
short time while in the D/S posit ion, the
transmission will return to automatic mode.
To keep shifting using the shift buttons,
move the selector lever to the right out of
the D/S position.
The transm ission automatically shifts up or
down before critical engine speed is reached .
The transmission only allows manual sh ifting
when the engine speed is within the permit­
ted range.
(D Tips
-When you shift into the next lower gear,
the transmission will downshift only

90 Transmi ssion
when there is n o possibility of over-rev ­
ving the e ngine.
- When the kick-down comes on, the
transmission will sh ift down to a lower
gear, depending on vehicle and engine
speeds.
- Tiptronic is inoperative when the trans ­
mission is in the fail-sa fe mode.
Kick-down
Applies to vehicles: with multitronic/5 tronic/t iptronic
Kick-down enables maximum acceleration .
Applies to vehicles with a multitronic
transmission
When you depress the acce le ra to r pedal be­
yond the resis tance point, the transmission
downshifts into a lower gear ratio depending
on the vehicle speed and engine speed. As l ong as the accelerator peda l is depressed, the
engine speed is automat ica lly regula ted for
maximum acceleration .
Applies to vehicle s with a S tronic- /
tiptronic transmis sion
When you depress the accelerator pedal be­
yond the resistance po int , the automat ic
tra nsmission downshifts into a lower gear, de­
pending on vehicle speed and engine speed .
The upshift in to the next higher gea r takes
p lace once the maxim um specified eng ine
speed is reache d.
_& WARNING
Please note that the d rive wheels can spin
if kick-down is used on a smooth slippery
road -there is a risk of skidding .
Launch Control Program
Applies to vehicles: with S tron ic
T he Launch Control Program provides the
best acceleration possible when starting from
a stop.
Requirement: The engine must be at operat ­
ing temperature and the stee ring wheel must
not be turned. ..
Press the
I~ O FF ! button c;, page 181 whi le
the engine is running. The
II i ndicator light
illuminates in the instrument cl uster and
Stab ilizat ion control (ESC): Sport. Warn ­
ing! Restricted stability
appears in the driv­
er info rmation system display .
.. Move the selector lever to the D/S posi tion
t o select sport mode (S) o r se lect the
dy­
namic dr iving mode in dr ive se lect*
c:> page 107.
.. Press the brake pe dal s trongly with yo ur left
foo t and hold it down fo r at leas t 1 second .
.. At the same time, press the acce lerator ped­
al down completely with your right foot un ­
til the eng ine reaches and maintai ns a high
RPM.
.. Remove your foot from the brake pedal
w ith in S seco nds
c;, &, .
_& WARNING
-Always ad apt your dr iving to the traffic
f low.
- On ly use the Launch Cont ro l Program
when road and traff ic conditions allow it
a nd other d river s w il l no t be en dangered
or annoyed by your driving and the vehi ­
cle's acceleration.
- Ple ase no te th at th e driving wheels can
spin an d the vehicle can break away
when sport mode is switc hed on, espe­
cially when the road is slippe ry .
- Once you have accelerate d, you sho uld
sw itch sport mode off by pressing the
I~ O FF ! button.
(D Tips
- The transmission temperature may in ­
crease significa ntly after using the
Launch Control P rogram . If that hap­
pens, the prog ram may not be availab le
for a few minutes. It will be ava ilable
again after a cool-down period.
- When accelerating using the Launch Cont rol program, all vehicle parts are
subject to heavy loads . Th is can result in
increased wear.

Transmission malfunction
Applies to vehicles: with multitronic/S tronic/tiptronic
[i1 Transmis sion: Pr ess brake p edal and se ­
lect gear again .
Press the brake pedal and se lect the des ired
selector lever position aga in . You can then
con tinue dr iv ing .
[i1 Transmi ssion overheating : Please drive
conserv ati vely.
The transmission temperature has increased
sign ificantly due to the sporty dr iving manner .
Drive in a less spo rty manner unt il the tem­
perature returns to the no rma l range and the
indicator light switches of .
[i1 Transmission mal funct ion: You can con ­
tinue driving
T here is a system ma lfunction in the transmis ­
sion . You may continue driving . Drive to your
authorized Audi dealer or qualified repair fa­
cility soon to have the malfunction corrected.
[i1 Transmis sion malfunction: Limited driv­
ing funct ionality
There is a sys tem ma lfunction in the transmis­
sion . The transmission is sw itch ing to emer­
gency mode . This mode only shifts into cer­
tain gears or will no longer shift at a ll. The en­
g ine may stall. Drive to your authorized A udi
dea ler o r qualified repair facility immediately
to have the malf unction co rrected .
[i11:1 Transmission malfunct ion: No reverse
You can continue d riving
S tron ic transm ission: There is a system ma l­
function in the transmission. T he transmis ­
sion is switch ing to emergency mode. This
mode on ly shifts into certain gears or will no
longer shift at all. The engine may sta ll. You
cannot engage the reverse gear . Drive to your
author ized Audi d ealer or qualifi ed repair fa­
cili ty immed ia tely to have the ma lfunction
c o rre cted.
[i1 Transmi ssion malfunction: Stop vehicle
and shift to park . Transm
ission 91
Do not continue driving. Se lect the P selector
lever posit ion and see your authorized A udi
dealer or qualified repair facility for assis­
tance.
(D Note
If t h e transmission switches to emergency
mode, you should ta ke t he ve hicle to an
a uthorized Audi dea lership as soon as pos­
s ible to have the condition c orrected .
Selector lever emergency release
Applies to vehicles: with multitronic/S tronic/tiptronic
If the vehicle's power supply fails, the selec­
tor lever can be released in an emergency.
Fi g. 101 Fr ont center co nso le : Remov ing t he as htray
in sert
F ig. 1 02 Selector lev er emer gency re le ase
"" To access the emergency re lease mecha ­
nism, remove the ashtray insert @ using the
release sw itch @
c:::> fig. 101.
"" Loosen and remove the cap in the ashtray
mount.
"" You now have access to a p in . Using a screw­
driver or sim ilar ob ject, press the p in down
and hold it i n that position c:::>fig . 102.
"" Now pres s th e re lease but ton and move the
selec tor lever to the N pos it io n. ..,.

92 Transmi ssion
The se lector lever can only be moved from the
P position if the key is in the lock and the igni­
tion is sw itched on. If the power supply fails
(for example, the battery is discharged) and
the vehicle must be pushed or towed, move
the selector lever to the N pos ition first using
the emergency release .

Audi adaptive cruise control and braking guard 93
Audi adaptive cruise
control and braking
guard
Introduction
App lies to vehicles: with Audi adaptive cruise co ntrol
The adaptive cruise control system assists the
driver by regu lating vehicle speed and helping
to maintain a set distance to the vehicle
ahead, within the limits of the system . If the
system detects a moving vehicle up ahead,
adaptive cruise control can brake and then ac­
celerate your vehicle . This he lps to make driv­
ing more comfortable on long highway
stretches.
The braking guard system can warn you about
an impending collision and initiate braking
maneuvers ¢
page 99.
Adaptive cruise control and braking guard
have technical limitations that you must
know, so please read this section carefully, un­
derstand how the system works and use them properly at all times.
General information
General information
Applies to vehicles: with Audi adaptive cruise control
Fig. 103 Front of the vehicle: Position of radar sensor
The area that contains the radar sensor
¢
fig. 103 must never be covered by stickers
or other objects or obstructed with dirt, in­
sects, snow or ice that will interfere with the
adaptive cruise control system and braking
guard. For information on cleaning, refer to
¢
page 195. The same applies for any modifi­
cations made in the front area . The
function of the adaptive cruise control
system and braking guard is limited under
some cond itions:
- Objects can only be detected when they are
within sensor range
.:!>page 95, fig. 106.
-The system has a limited ability to detect
objects that are a short distance ahead, off
to the side of your vehicle or moving into
your lane.
- Some kinds of vehicles are hard to detect;
for examp le motorcycles, vehicles with high
ground clearance or overhanging loads may
be detected when it is too late or they may
not be detected at all.
- When driving through curves¢
page 94.
-Stationary objects¢ page 94.
A WARNING
-Always pay attention to traffic when adap-
tive cruise control is switched on and brak­ ing guard is active. As the dr iver, you are
still respons ible for start ing and for main­
tain ing speed and distance to other ob­
jects. Braking guard is used to assist you .
The driver must always take action to avoid
a col lision. The driver is always responsible
for braking at the correct time.
- Im proper use of adaptive cruise con trol
can cause collisions, other accidents and
serious personal inj ury .
- Never let the comfort and convenience
that adaptive cruise control and braking
guard offer distract you from the need to
be alert to traffic conditio ns and the
need to remain in full control of your ve­
hicle at all times,
- Always remember that the adaptive
cru ise control and brak ing guard have
limits -they will not slow the vehicle
down or maintain the set distance when
you drive towards an obstacle or some­
thing on or near the road that is not
moving, such as vehicles stopped in a
traffic jam, a stalled or disabled vehicle.
If registered by the radar sensor, vehicles
or obstacles that are not moving can
trigger a collision warning and if .,.

94 Audi adaptive cruise control and braking guard
confirmed by the video camera, an acute
collision warning.
- For safety reasons, do not use adaptive
cruise control when driving on roads with
many curves, when the road surface is in
poor condition and/or in bad weather
(such as ice, fog, gravel, heavy rain and
hydroplaning). Using the system under
these conditions could result in a colli­
sion.
- Switch adaptive cruise control off tempo­
rarily when driving in turning lanes, on
expressway exits or in construction
zones. This prevents the vehicle from ac­
celerating to the set speed when in these
situations.
- The adaptive cruise control system will
not brake by itself if you put your foot on
the accelerator pedal. Doing so can over­
ride the speed and distance regulation.
- When approaching stationary objects
such as stopped traffic, adaptive cruise
control will not respond and braking
guard will have limited function.
- The adaptive cruise control system and
braking guard do not react to people, an­
imals, objects crossing the road or on­
coming objects .
- The function of the radar sensor can be
affected by reflective objects such as
guard rails, the entrance to a tunnel,
heavy rain or ice.
- Never follow a vehicle so closely that you cannot stop your vehicle safely. The
adaptive cruise control cannot slow or
brake the vehicle safely when you follow
another vehicle too closely . Always re­
member that the automatic braking
function cannot bring the vehicle to a sudden or emergency stop under these
conditions.
- To prevent unintended operation, always
switch ACC off when it is not being used.
{[) Note
The sensor can be displaced by impacts or
damage to the bumper, wheel housing and
underbody. That could affect the adaptive cruise control system and braking guard.
Have your authorized Audi dealer or au­
thorized Audi Service Facility check their
function.
, In curves
Applies to vehicles: wit h Aud i adapt ive cr uise contro l
Fig. 104 Example: driv ing into a curve
When driving into a curve <=> fig. 104 and out
of a curve, the adaptive cruise control may re­ act to a vehicle in the next lane and apply the
brakes. You can override or prevent the brak­
ing by pressing the accelerator pedal briefly.
Stationary objects
Applies to vehicles: with Aud i adaptive crui se contro l
Fig. 105 Example: object changing lanes a nd station ­
a ry object
The adaptive cruise control system only reacts
to objects that are moving or that the system
has already detected as moving. For example,
if a vehicle @, which has already been detect­
ed by the adaptive cruise control, turns or
changes lanes and another stationary vehicle
@ is located in front of that vehicle, the sys­
tem will not react to the stationary vehicle.

Audi adaptive cruise control and braking guard 95
Audi adaptive cruise
control
Description
A pp lies to vehicles: with Audi adaptive cruise control
Fig. 106 Detect ion range
What can Audi adaptive cruise control do?
The adaptive cruise control works in conjunc­
tion with a radar sensor installed in the front
of the vehicle ¢
page 93, fig . 103, which is
subject to designated sys tem limits
¢
page 95. Stationary objects are disregard­
ed .
On open roads w ith no traffic, adaptive cruise
control wo rks like a regular cruise control sys­
tem. The stored speed is maintained. When
approaching a moving vehicle detected up
ahead, the adaptive cruise control system au ­
tomatically slows down to match that vehi­
cle's speed and then maintains the distance
that the driver previously stored. As soon as
the system does not detect a vehicle up
ahead, adaptive cruise control accelerates back up to the stored speed.
Which functions can be controlled?
When you switch adaptive cruise control on,
you can set the current speed as the "control speed" ¢
page 95, Switching on and off.
When driving, you can stop cruise control
¢
page 97 or change the speed¢ page 96
at any time .
You can a lso set the distance to the object
ahead and set the adaptive cruise control driv­ ing program
¢ page 97.
Switching on and off
Applies to vehicles: with Aud i adap tive crui se contro l
Fig. 107 Selecto r lever : switch ing on/off
Fig . 108 Instru men t cluster: Audi adaptive c ru ise con ­
trol
You can set any speed between 20 mph and
95 mph (30 and 150 km/h).
Ind icator lamps and messages in the instru­
ment cluster disp lay inform you about the cur­
rent system status and settings.
Switching Audi adaptive cruise control on
.. Pull the lever toward you into position (D
¢ fig. 107. ACC standby appears in the in­
strument cluster display.
Setting the speed and activating regulation
.. To set the current speed, press the ISETI but-
ton ¢
page 11, fig. 4. The set speed is ll-

96 Audi adaptive cruise control and braking guard
shown in the tachomete r@ and is also
shown briefly in the display @
~fig . 108 .
Switching Audi adaptive cruise control off
.. Push the lever away from you into position
@ until it clicks into p lace. The message
ACC off appears.
@ Indicator lights
II-Adaptive cru ise control is switched on .
No vehicles are detected up ahead . The stored
speed is maintained.
• -A moving veh icle is detected up ahead.
The adaptive cruise control system regulates
the speed and d istance to the moving vehicle
ahead and a ccelerates/brakes automatica lly.
• -When automatic brak ing is not able to
keep enough distance to a previously detected
mov ing vehicle up ahead, you must take con­
trol and brake~
page 98, Request for driver
intervention.
© Display
If adaptive cruise control is not shown in the
display, you can call it up with the
I RES ET I
button ¢ page 24.
Based on the symbols in the display, you can
determ ine if the system is maintaining a dis­
tance to the vehicle ahead and what that dis­
tance is.
No vehicle -No vehicle ahead w as detected.
White vehicle -A vehicle ahead was detected.
Red vehicle -Prompt for the driver to take ac ­
tion
~ page 98.
Both arrows on the scale © indicate the dis­
tance to the vehicle ahead. No arrow appears
when the vehicle is on an open road and there
is no object ahead . If an object is detected
ahead, the arrow moves on the scale .
The green zone on the scale shows the stored
d istance. For information on changing the
stored distance , re fer to
q page 97. If the
distance selected is too close or may soon be ­
come too close, the arrows move into the red
z one on the scale .
A WARNING
Improper use of the adaptive cruise con­
trol can cause collisions, other accidents
and serious personal injur ies .
- Pressing the
!SET ! button when driving at
speeds below 20 mph (30 km/h), w ill au ­
tomatically accelerate the vehicle to
20 mph (30 km/h), which is the mini­
m um speed that can be set.
(i} Tips
-If you switch the ignit ion or the adaptive
cruise control off, the set speed is erased
from the system memo ry.
- The electronic stab ilizat ion control (ESC)
and the anti-slip-regulat ion (ASR) are au­
tomatically turned on when the adapt ive
cruise contro l is turned on. Both systems
cannot be turned off if the adaptive
cruise control is turned on.
Changing the speed
Applies to vehicles: with Audi adaptive cru ise control
0
f
• 0
Fig. 109 Selector lev er: ch an gin g the speed
.. To increase o r reduce the speed in incre­
ments,
tap the lever up or down.
-"' ... 0 ±
" a,
.. To increase or reduce the speed quickly, hold
the lever up or down until the red LED@
reaches the desired speed
¢ page 95 ,
f ig. 108 .
Following any changes, the new stored speed
will be displayed briefly in the display @
Qpage 95, fig. 108.

Audi adaptive cruise control and braking guard 97
Interrupting cruise control
Applies to vehicles: with Audi adaptive cruise control
Fig. 110 Selector lever
Requirement: adaptive cruise control must be
switched on
¢fig. 110@.
Overriding cruise control
• To accelerate manually, press the accelera­
tor pedal. The message
ACC override ap­
pears.
• To resume adaptive cruise control, remove
your foot from the gas pedal. The system re­
turns again to the speed that was saved be ­
fore.
• You can save a new speed at any time by
pressing the
I SETI button ¢ page 11, fig. 4.
Canceling cruise control while driving
• Move the lever into position @. The mes­
sage
ACC standby appears. Or
• press the brake pedal.
• To resume the stored speed, move the lever
into position @.
A WARNING
Never resume the stored speed if the
speed is too high for prevailing road, traf­
fic or weather conditions.
Setting the distance
App lies to vehicles: wit h Aud i adapt ive cr uise contro l
Fig.
111 Selector lever: setting the distance
• Tap the switch to display the current set dis­
tance
¢ fig. 111.
• To increase or reduce the distance by incre­
ments, tap the switch again to the left or
r ight. The distance between the two vehicles
w ill c hange in the instrument cluster dis­
p lay .
When approach ing a moving vehicle up ahead,
the adapt ive cruise control system brakes to
match that object's speed and then mainta ins
the stored distance. If the vehicle ahead ac­
ce lerates, adaptive cruise contro l will also ac­
celerate up to the stored speed.
T he higher the speed, the greater the distance
in yards (meters) ¢& .The
Distance 3 setting
is recommended.
T he distances provided are specified va lues .
Depend ing on the driv ing s ituation and the
how the vehicle ahead is driving, the actual
distance may be more or less than these tar­
get distances.
T he var ious symbols for the time increments
appear briefly in the informat ion line @
¢ page 95, fig. 108 when you change the set ­
tings.
c:::::,_c:::::, ___ Distance 1 : This setting corre-
sponds to a distance of 92 feet/28 meters
when traveling at 62 mph (100 km/h), or a
time interval of 1 second.
c:::::, __ c:::::, __ Distance 2 : This setting corre­
sponds to a distance of 118 feet/36 meters
when traveling at 62 mph ( 100 km/h), or a
time interval of 1.3 seconds.

98 Audi adapti ve cruise control and bra king gu ard
<:::::> __ _ <:::::> _ Dista nc e 3: This setting corre-
sponds to a distance of 164 feet/SO meters
when traveling at 62 mph (100 km/h), or a
time interva l of 1.8 seconds.
<:::::> ____ <:::::> Dista nce 4 : This setting corre-
sponds to a distance of 210 feet/64 meters
when traveling at 62 mph (100 km/h), or a
time interva l of 2 .3 seconds.
A WARNING
Following other vehicles too closely in­
creases the risk of collisions and serious
personal injury.
- Setting short distances to the traffic
ahead reduces the t ime and distance
available to br ing your vehicle to a safe
stop and ma kes it even mo re necessa ry
to pay close attention to traffic.
- Always obey applicable traffic laws, use
good judgment, and select a safe follow­
ing dis tance for the traffic, road and
weather condit ions.
(0 Tips
- Di stanc e 3
is set automatically each time
you sw itch the ignition on.
- Your standa rd settings are automatically
stored and assigned to the remote con­
trol key bei ng used.
Setting the driving program
Ap plies to vehicles: with Audi adaptive cruise co ntrol
Depending on the se lected driving program
and d istance, driving behavior when accelerat ­
ing will vary from dynamic to comfortab le .
Setting the driving program for vehicles
w ithout Audi dr ive s elect*
• In the radio/MM I*, select: I CAR ! function
button
> Adapti ve c ruis e control > Driv ing
p rog .
> comf ort , s tanda rd or dy nam ic. Or
• Se lect :
I CAR I function button > Car system s*
control button > Driv er as sist > Adapt ive
crui se c ontrol > Driv ing program *
> Com­
f o rt, Standard
or Dynami c. S
etting the driving mod e for vehicles w ith
Audi dri ve select*
Refer to¢ page 107.
(D Tips
Your settings are automatical ly stored and
assigned to the remote control key being
used .
· Request for driver intervention
App lies to vehicles: wit h Audi adapt ive c ruise contro l
Fig. 1 12 In strument cluster: request for driver inter ·
vent ion
In certa in situations, the system will p rompt
you to take action. This could happen, for ex­
amp le, if braking by the adaptive cruise con­
tro l system is not enough to maintain enough
distance to the veh icle ahead.
The instrument cluster will warn you about
the danger ¢
fig. 112:
-A red vehicle is p ictured in the display.
- The text
DISTANCE! appears in the status
ba r.
- The red indicator light . blinks.
- In addition, a warning tone sounds.