AUDI Q2 2021 Owner´s Manual

Navigation

CO

â
rN
IN
rN
•-H

•H
00
Navigation
Introduction
Applies to: vehicles with navigation system
Depending on your vehicle's equipment, the
navi­

gation data
for
your navigation system is located
either on the SD card provided or on the internal
flash drive of the MMI. The information given
here always applies to both navigation systems
unless otherwise stated, e.g. "Applies to vehicles
with navigation system (SD card)".
The navigation system is designed for use on­
ly with the SD card provided. AUDI AG shall
not accept any liability for the consequences
of the use of other SD cards.
Setup
Applies to: vehicles with navigation system (SD card)

•
Slide the SD card with navigation data (provi­
ded) into the slot in the SD card reader until
you feel it engage. The missing corner of the SD
card should be at the front right.
© CAUTION
Do not store the SD card with navigation data
outside of the SD card reader slot (e.g. in the
glove box) for long periods. External factors,
such as excessive heat, may cause data loss.
Audi recommends
that
you make a backup
copy of the SD card and store it in a location
protected from external factors (outside of
the vehicLe).
©
Note

- Please note that the navigation system is
immediately no longer available if the SD
card is removed from the SD card reader.
- Store the SD cards in a suitable case to pro­
tect them from dirt and dust and to avoid
damage.
Calling up the navigation
menu
Applies to: vehicles with navigation system
The navigation system guides you directly
to
your
destination, avoiding traffic obstructions and us­
ing alternative routes if desired.
Navigation: enter destination

Î5^
Where would you like to go?

f
e.g. "Prague Charles Bridge"
1 Home address
Last destinations

I
Petrol station
<£
2,3 km (D)
M jnchener
StraSe,
Ingolstadt
John Smith

Fig.
172 Illustration: Entering a destination

•
Select: |NAV/MAP| button.
After calling up the navigation system, the Enter
destination menu will be displayed. The follow­
ing information can be shown on the infotain­
ment display:

(T)
Entry field
for
the search function
(D Home address
(5) Destinations recently travelled to

(Î)
Stored favourites
208
210
208
210
If you have connected a mobile phone to the

MMI,
your directory contacts are then listed if
you have added navigation data to at least one
contact.
The menu item Favourites (4)
^Fig.
172 and your
directory contacts are shown in the Enter desti­
nation menu when you have entered one or more
Letters in the entry
field.

Switching between destination entry and map:
- Press the |NAV/MAP| button repeatedly until
the map is displayed. Or: Press the left control
button > Switch to map.
A WARNING
- Today's driving conditions require the full
attention of drivers. Please always note the
information in the chapter
^>page
263,
Safe driving.
- Pay attention to traffic rules when driving.
207

Navigation
- The route calculated by the navigation sys­
tem is a recommendation of how best to
reach a destination. Pay attention to traffic

lights,
no stopping signs, lane change re­
strictions, one-way streets, etc.
© CAUTION
-Should the navigation directions contradict
the current traffic regulations, you must al­
ways follow the traffic regulations.
- The volume should only be set at a level
which enables you to hear distant police and
emergency vehicles clearly - failure to do so
could result in an accident.
© Note
- Snow or other obstructions on the GPS aer­
ial or interference caused by trees or large
buildings could affect the reception of the
satellite signals and make positioning
diffi­

cult. GPS reception and vehicle positioning
can also be adversely affected by deactiva­
tion or a malfunction of several satellites.
- Road names can change; therefore the
names stored on the MMI may be different
from the actual names in exceptional cases.
Entering a destination
Searching for navigation destinations
Applies to: vehicles with navigation system
With the search function, you can use the MMI
touch
pad*
or the speller for letters/numbers to
enter navigation destination information in any
order (e.g. Forest Road 20 London).
You
can
search for special destinations, contacts, recent
destinations or favourites in the same way to
help you navigate to the desired address.
Press the |NAV/MAP| button repeatedly untiL the
Enter destination menu is displayed
opage
207,
Fig. 172.
• Push the rotary pushbutton upwards. The entry
field will be displayed
@ ^>page
207, Fig. 172.
- Enter one or more search terms in the entry

field.

- If appropriate, confirm an autocomplete
sug­

gestion*
or a suggested word*. Refer to

^page
159, Speller for letters/numbers.
- Turn the rotary pushbutton clockwise to switch
to the results list.
- Select a destination from the results list and
confirm it.
- Select and confirm Start route guidance.
The route will be displayed as an overview on the

map.
Route guidance is already active.
Narrowing the search area
All countries are preselected for the search func­
tion at the factory.
-In the input menu
(T)<=>page207,
Fig. 172, se­
lect the right controL button > Country selec­

tion.

- Select the country flvj) which you would Like to
search in. This will limit the number of results
and speed up the search. The entry selected in
the country selection menu will be stored.
© Note
- The terms suggested by the MMI depend on
the destinations to which you have recently

driven.

- Up to 50 entries are stored in the list of des­
tinations to which you have recently driven.
- For more information on the search func­

tion,
please refer to
^>page
160.
Loading last destination
Applies to: vehicles with navigation system

The
destinations you have most recently driven
to are stored automatically and can be loaded
directly as new destinations.
Important: You must have set
a
destination in
the past.

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

opage
207, Fig. 172.
The destinations to which you have recently driv­
en are listed directly in the Enter destination
menu under your home address and marked with
the
symbol®^
page
207, Fig. 172. •
208

Navigation

CO

â
rN
IN
rN
•-H

•H
00
- Select and confirm one of the recently set des­
tinations from the List.
- Select and confirm Start route guidance.
Deleting recent destinations
- Select and confirm one of the recently set des­
tinations from the list.
- Select: right control button > Delete destina­
tion > Delete this recent destination or Delete
all recent destinations.
The destination selected or all the recent desti­
nations will be deleted and no longer displayed in
the Enter destination menu.
Entering an address
Applies to: vehicles with navigation system
As an alternative to the search function, you can
also enter an address step by step.

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

«*
page 207, Fig. 172.

•
Select: left control button > Enter address.
- To enter a destination via the country: Select
and confirm Country. Select
a
country from the
list and confirm it. Or: Search for
a
country via
the entry
field.

- To enter a destination via the town/post code:
Select and confirm Town/post code. Enter a
town or a post code. Or: Select and confirm a
town from the list.
- Select and confirm additional details for the
destination such as Street, House number or
Centre.
- To enter a destination via an intersection*: Se­
lect and confirm Intersection. You must al­
ready have entered a street. SeLect
a
street di­
rectly from the list and confirm it. Or: Search

fora
street via the entry
field.

- Select and confirm Start route guidance.
Setting a destination from the map (via
rotary pushbutton)
Applies to: vehicles with navigation system (SD card) and ro­
tary pushbutton with joystick function
A location on the map can be set as a destina­
tion.

Fig.
173 Moving the crosshairs (MMI control console with
rotary pushbutton with joystick function)

•
Press the |NAV/MAP| button repeatedly until
the map is displayed.
- To set a convenient map scale: Turn the rotary
pushbutton clockwise or anti-clockwise.
- To activate the crosshairs: Press the rotary
pushbutton.
- To navigate in the legend menu: Select and
confirm the crosshairs mode in the legend
menu
(D^F/g.
173. The crosshairs will appear
on the
map(î).

- To move the crosshairs: Turn the rotary push­
button in the direction you would like to move
the crosshairs (see magnified detail

^>Fig.
173). Press and hold the rotary pushbut­
ton until the crosshairs are at the desired
posi­

tion on the map. Press the |BACK| button.
- To use the destination: Select
|QK[
in the
Leg­

end menu
(f)^>
Fig.
173.
If you
wish to set a
stopover, select and confirm Set as stopover
and then Start route guidance.
- To hide the crosshairs: Press the
I BACK |
button

twice.

Additional information on the point selected
with the crosshairs: If
you
use the crosshairs to
preselect a location on the map, any existing in­
formation on this location (e.g. road name, ad­
dress or special destinations) will be displayed ©

<=>page
219, Fig. 182.
209

Navigation
Setting a destination from the map (via
MMI touch)

Applies
to: vehicles with navigation system (flash memory)

and
MMI touch pad
A location on the map can be set as a destina­
tion.
- To set a convenient map scale: Turn the rotary
pushbutton clockwise or anti-clockwise.
- To activate the crosshairs: Press the rotary
pushbutton. The crosshairs will appear on the

map.

- To move the crosshairs: Use the MMI touch pad
to move the crosshairs to the destination

<^>page
156.
- To use the destination for route guidance:
Press the rotary pushbutton when the cross­
hairs are displayed. If
you
wish to set
a
stop­

over, select and confirm Set as stopover and
then Start route guidance.
-
To
hide the crosshairs: Press the
|BACK|
button.
Additional information on the point selected
with the crosshairs: If
you
use the crosshairs to
preselect a location on the map, any existing in­
formation on this location (e.g. road name, ad­
dress or special destinations) will be displayed ©

^>page
219, Fig. 182.
Using home address/favourite as the
destination

Applies
to: vehicles with navigation system

The
home address option is a quick and easy way
to have the system guide you home.
The
favour­

ites make it easier to
access
destinations you re­
quire regularly.
• Press the
|NAV/MAP|
button repeatedly until
the Enter destination menu is displayed

opage
207, Fig. 172.
Using the home address as the destination
Important: A home address must have been stor­
ed
o
page 215.
Your home address is displayed in the Enter des­
tination menu
(f) opage
207, Fig. 172.
- SeLect: Home address
>
Start route guidance.
Using a favourite as the destination
Important: At Least one favourite must have been
stored as a destination
<=>page
216.
- Enter at least the first three letters of the de­
sired favourite in the entry field for the search

function.
The favourites found will be shown on
the infotainment display (4)
^>page
207,
Fig. 172.
- SeLect and confirm the desired item.
- Select and confirm Start route guidance.
- Further home address settings can be found
on
•=>page
215.
- Further favourites settings can be found on

^>page
216.
Using a destination from the directory

Applies
to: vehicles with navigation system

You
can navigate directly to entries in the direc­

tory.

Options — Show contact details
H
^

i
i

C

Fiç

s
Max
Mustermann jy
.
E^
MusterstraGe
4,
54321
Musterstadt
[

Jr3^^
HauptstraSe
1,
54321
Musterstadt

h ^\
(D) 54321 Musterstadt,
MusterstraBe
^J
0°45'44.5"N,
l°25'30.7'O
•
•=

. 174 Possible directory contacts
Important: A postal address with navigation data
must be available for
a
contact or
a
navigation
destination must have already been added for a
contact
Opage
216, Directory contacts.

•
Press the
|NAV/MAP|
button repeatedly until
the Enter destination menu is displayed

^>page
207, Fig. 172.

*•
Select: left control button > Directory
>
a con­

tact.

Directory contacts are displayed in alphabetical
order and are displayed together with a location

symbol:

(Î)
Business postal address
(D Private postal address
210

Navigation
(D Business navigation destination
(4) Private navigation destination
- SeLect and confirm a postal address or
a
naviga­
tion destination. If
you
select
a
navigation des­

tination,
route guidance is started immediate-

iy.

- If
you
select a postal address, you can check the
address details again.
- You can then select and confirm Start route
guidance.
Further directory functions in the navigation sys­
tem can be found on
<^>page
216.
- Addresses which you have imported from
your mobiLe phone into the MMI can also be
used as navigation destinations.
- If
a
directory contact is greyed out, no
navi­

gation destination/postal address has yet
been added for the contact.
Point of interest search (special
destinations)

Applies
to: vehicles with navigation system
Navigation: enter destination
Search area
Find entry
Select category
Ç myAudi special destinations

H
Petrol station
P parking facilities
in vicinity of destination

Fig.
175 Example: Searching for a special destination

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

•=>
page 207, Fig. 172.

*-
Select: left control button > Special destina­

tions.

- To change the search area: Select and confirm
Search area and then a search area from the
list.
The following search categories are available:
In immediate vicinity: You can select special des­
tinations from different categories. The special
destinations are displayed in a list, starting with
destinations in the immediate vicinity and going
up to destinations within a radius of 200 km.
In vicinity of route: Special destinations along
the route can only be selected when the route
guidance function is active. The special destina­
tions are located directly on or in the immediate
vicinity of your route. You can also select special
destinations from different categories. For exam­

ple,
you can look for
a
hotel or
a
car park at the
destination.
In vicinity of destination/In vicinity of stopover:
Special destinations near the
destination/stop­

over can only be selected when the route
guid­

ance function is active. You can also select special
destinations from different categories. For exam­

ple,
you can look for
a
hotel or
a
car park at the
destination.
In new town: SeLect
a
country or search in a new

town.
Enter the name of the desired town. You
can select special destinations from different cat­
egories. You can use this function to find special
destinations in any town irrespective of the desti­
nation currently set or the vehicle position.
- To find the name of
a
special destination in
the selected search area: Enter the name of the
special destination.
- To search for a special destination in a specific
category: Choose Select category. SeLect and
confirm a category, for example Restaurant.
myAudi special
destinations*1525

In myAudi special destinations, you can find per­
sonal special destinations which you have added
in your myAudi account and imported to the MMI
using an SD card or online*
^>page
224.
- To add further myAudi special destinations:
Select the right control button > Import •

CO

<
O
rN
IV
rN
t-H
o
<

^
Important: You must have created a myAudi account at

my.audi.com,
added a vehicle to the account and stored a

destination.

2)
This function is not available in the Mexican market.
211

Navigation
myAudi special destinations. Log in to myAudi
if necessary. Select and confirm the desired
medium from the source list (e.g. SD card 1).
© Note
- Further information on the myAudi special
destinations can be found online at
my.audi.com.
- The distances to special destinations are
shown as the crow flies from your current

location.
The actual driving distance be­
tween your current position and the speciaL
destination is updated automatically. How­
ever, the list of special destinations is not
sorted again.
- Sometimes there are destination entries in
the list that cannot be displayed completely
because they are too
long.
If
you
select one
of these entries with the rotary pushbutton,
detailed information on the selected entry
will be displayed automatically after
a
few
seconds.
Online point of interest search (online
search)
Applies to: vehicles with navigation system and Audi connect
(infotainment)

You
can look for special destinations online.
Important: The requirements for Audi connect
(infotainment) must be met
<^>page
191.

*•
Press the
INAV/MAP]
button repeatedly until
the Enter destination menu is displayed

opage
207, Fig. 172.

*-
SeLect: Left control button > Online search. The
search area that was last set will be displayed
in the entry
field.

- To change the search area: SeLect: right control
button > Select search area.
-To find an online destination in the selected
search area: Enter
a
new town/country if neces­
sary. Enter a search term (e.g. hotel) and press
the rotary pushbutton. Select and confirm an
online destination from the list.
- To search for an online destination in a specif­
ic category: Select and confirm Select catego­

ry.
Select and confirm a category, for example
Restaurant.
Please see
^>page
211, Point of interest search
(special destinations) for information on which
search areas are available.
You can also use the speech dialogue system to
search for onLine destinations
•=>
table on
page 168.
- Please always note the information in the
chapter
^>page
204, General notes on Audi
connect (infotainment).
- Further information can be found on the In­
ternet at www.audi.com.
Calling up destinations from myAudi
account
Applies to: vehicles with navigation system and Audi connect
(infotainment)

You
can import personal navigation destinations
from your myAudi account to the MMI.
Important:
The requirements for Audi connect (infotain­
ment) must be met
^>page
191.
You must have created a myAudi account at
my.audi.com, added a vehicLe to the account and
stored one or more personal destinations.

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

•=>page
207, Fig. 172.

*•
Select: left control button > myAudi contacts.
• If necessary, enter your myAudi login details or
your myAudi PIN
^>page
196. The contacts
stored in myAudi will be displayed.
- Select and confirm a contact.
- Select and confirm a private/business naviga­
tion destination.
- If
desired,
select and confirm Start route guid­

ance.

-You only have to enter your myAudi login
details once.
212

Navigation

CO
<
o
rN
IV
rN
•-H

•H
00
- You will receive your myAudi
PIN
after set­
ting
up
a myAudi account.
- Further information
can
be found
on the In­

ternet
at
www.audi.com.
Entering
a
destination using coordinates

Applies
to:
vehicles with navigation system

•
Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

<>page
207,
Fig.
172.

*-
Select: left control button > Geographic coordi

nates.

- Select Latitude/Longitude.
- Press
the
rotary pushbutton
to
select
the
indi­

vidual values.
- Turn
the
rotary pushbutton clockwise
or
anti­

clockwise
to
change
the
selected value.
- Select and confirm Start route guidance.
Adding
a
stopover

Applies
to:
vehicles with navigation system

You
can enter
a new
destination while route
guidance
is
active.
Navigation: enter destination
(D) Hamburg, 20148
Stop route guidance
Delete stopover

Fig.
176
Example: Active route guidance with stopover
Important:
The
route guidance function must
al­

ready
be
active.

•
Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

•=>
page
207,
Fig.
172.

Entering
a
destination
as a
stopover
- Enter
a
destination
in the
entry line

•=>
page
208.

- Select
a
destination from
the
results list
and

confirm
it.

- Select and confirm
Set
as stopover.
Deleting
a
stopover
- Push
the
rotary pushbutton upwards.
The

search function
and the
active route guidance
will
be
displayed.
- Select and confirm Delete stopover
@
o
Fig.
176.

- The stopover will
be
deleted.
Stopping route guidance

Applies
to:
vehicles with navigation system
Important:
The
route guidance function must
be

active.

•
Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

o page
207,
Fig.
172.

*•
Turn
the
rotary pushbutton
to the
left until
the

active route guidance
is
displayed
<=>page
213,

Fig.
176.

*•
Select and confirm Stop route guidance
(l)
•=>page
213,
Fig.
176. The
destination will
be

deleted.
Or:
Select
the
right control button
>

Stop route guidance.
Further options when entering
a

destination

Applies
to:
vehicles with navigation system
Depending
on the
function chosen,
the
following
options
may be
availabLe
to
you when
you are en­

tering
a
destination:

•
Press
the
right control button.
Stop route guidance:
The
route guidance func­
tion must
be
active.
The
route guidance will
be

stopped.
For
more information, please refer
to

=>
page
213.

Country information: With this option, you
can

view
the
speed Limits
for
towns
and
country
roads
in the
country you have selected. This infor­
mation
is
displayed automatically when
you
cross
a border
in the
route information
(7)

•=>page
219,
Fig.
181 if
this
is
activated

<=>
page
221.

Country selection: Select
a
country
([vj)
which,
for example, you wish
to
include
in
your searches

^>page
208.
Alternatively, select
all
countries.
•

213

Navigation
Route criteria: Refer to
^>page
217, Route crite­

ria.

Show location on map: Important: You must
have seLected a destination from the results list.
The destination entered will be shown on the

map.

Parking
at
this location*: Important: You must
have seLected a destination from the results list.
All the parking facilities near the location selec­
ted are shown on the infotainment display.
Delete: The selected entry will be deleted. You
can delete individual entries or all the entries

(e.g.
favourites or last destinations).
Audi connect at this location*: Important: You
must have selected a destination from the re­
sults list. This allows you to search for e.g. travel
information in the vicinity of the seLected loca­

tion.

Online traffic data*: The online traffic informa­
tion
tapage
226 can be switched
on/off.

Add destination to contact: Refer to

^>page
216.
Store as favourite: Refer to
<^page
216.
Voice guidance: Refer to
^page
218.
Navigation settings: Refer to
<=>page
217.
(T)
Note

Information on online traffic data* can be
found on the Internet at www.audi.com.
Personal route assist

Applies
to: vehicles with navigation system and personal

route
assist
Your MMI system can memorise routes
that
you
frequently follow and suggest them based on
your vehicle's current location (e.g. the daily
route
to
your workplace and back).

yi

::

Fig.
177 Example: Personal route display

Fig.
178 Personal route tip

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

^page
207, Fig. 172.

*•
Select: right control button > Personal route
assist.
When the function is activated
fcTÎ,
the MMI re­
cords routes you frequently follow (even if
you
do
not enter the destinations and start route
guid­

ance).
If route guidance is not active, your personal
routes are listed below the home address in the
Enter destination menu and marked with the

symbol^®
^>Fig.
177. This symbol is displayed
in the status line on the infotainment display
while the personal route assist function is switch­
ed on and the navigation menu is active. •
214

Navigation

CO
< o rN
IV
rN
•-H

•H
00
The distance to the destination and the estima­
ted time of arrival are also displayed for your per­
sonal routes. Even before route guidance is star­

ted,
your MMI system monitors the traffic situa­
tion for your personal routes and the infotain­
ment display shows possible traffic disruptions
along the route you will probably take (2)

*>Fig.
177.
A message is displayed if there are any Larger
traffic disruptions (more than 7 minutes delay),
irrespective of which menu is selected
<=>Fig.
178.
Select and confirm one of the following options:
- Start route guidance: The MMI starts route
guidance for the personal route shown and
searches for
a
faster route (if one is available).
- Ignore this route and this message: The desti­
nation shown and all of the corresponding per­
sonal routes are no Longer taken into account
on the current trip. No more messages are dis­
played for the destination shown. The destina­
tion shown and
all
the corresponding personal
routes are ignored until the car is parked and
the ignition is subsequently switched on again.
- Ignore all messages: All of the personal routes
are ignored for the current trip. No more mes­
sages are displayed. Messages for traffic dis­
ruptions on the personal routes are not dis­
played again until the car is parked and the ig­
nition is subsequently switched on again.
The symbol disappears from the status line and
your trips are no longer recorded as soon as you
switch off the personal route assist function.
Trips which have already been recorded remain

stored.

Deleting a personal route:
- Select the desired personal route in the Enter
destination menu
®
^>Fig.
177.
- SeLect: right control button > Delete destina­

tion.

Deleting all personal routes:
- Select:
|MENU]
button > Settings
>
left control
button > MMI settings > Factory settings.
- Select: Navigation and online memory
>
Re­
store factory settings
^page
256.
- Personal routes are memorised depending
on your vehicle's location. Routes are priori­
tised depending on how often you drive to a
destination.
- Up to three personal routes are displayed in
the Enter destination menu. The traffic sit­
uation is always monitored for the three
routes most likely to be followed depending
on your vehicle's current location.
- Please note that, once a personal route has
been stored, it remains stored after the
function is deactivated (i.e. it has to be de­
leted manually).
- This function is not available in the Mexican
market.
Home address
Applies to: vehicles with navigation system

•
Press the |NAV/MAP| button repeatedly until
the Enter destination menu is displayed

<> page
207, Fig. 172.
Storing a home address
- Select and confirm Home address (2)

<=>page
207, Fig. 172. After calling up the
home address for the first time, you will be
asked to set
a
home address.
- Select and confirm Create now.
- Enter
a
destination or select
a
destination from
the list. Or:
- Select and confirm a destination > right control
button > Store as home address.
A home address is stored in the MMI regardless
of any mobile phone which may be connected.
This home address is always available, even if no
mobiLe phone is connected to the MMI.
Editing home address
- Select the Home address (2)
Opage
207,
Fig. 172.
- Select: right controL button > Edit home ad­

dress.

- Select and confirm a new destination as the
home address.
215

Navigation
The seLected destination will
be
stored
as the

new home address.
Favourites

Applies
to:
vehicles with navigation system

•
Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

•=>page
207,
Fig.
172.

- To store
a
destination as a favourite: Search
for
the
desired destination using
the
entry

field.
Or:
Select and confirm
a
destination from
the List. Select: right controL button > Store
as

favourite.
- To rename a favourite: Select
the
left control
button
>
Favourites
>
a
favourite from
the
list
> right controL button
>
Rename favourite.
- To move a favourite: Select
a
favourite from
the list
>
right control button
>
Move favourite.
SeLect and confirm
the
position
of
the favourite

selected.

- To delete
a
favourite: Select
a
favourite from
the list
>
right control button
>
Delete favour­
ite > Delete this favourite
or
Delete
all
favour­

ites.

Directory contacts

Applies
to:
vehicles with navigation system
Two addresses (private/business)
can
be stored
as
a
destination
for
each
contact
in the
directo­

ry-

• Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

=>page
207,
Fig.
172.

Storing
a
destination
as a
contact
in the

directory
Important:
A
mobile phone must
be
connected
to
the MMI
system
^>page
173.

- SeLect
a
destination
>
right control button
>

Add destination
to
contact.
- SeLect and confirm Add business destination
or

Add private destination.
- Enter a name.
Or:
SeLect and confirm a directo­
ry contact from
the
list.
- Select and confirm Store business card.
Alternative routes

Applies
to:
vehicles with navigation system

.--. -*
_
o Ï
<?>
J»
Berlin
*

&£
% I
&
-•
O

si
on a

Fig.
179
Display
of
alternative routes
on the
overview
map

Important:
A
destination must have been
en­

tered and
you
must have started route guidance.

>
Press
the |NAV/MAP|
button repeatedly until
the Enter destination menu
is
displayed

<$page
207,
Fig.
172.

*•
Select: right control button
>
Navigation set­
tings
>
Always display alternative routes.
Three routes will
be
displayed
on the
overview
map
G
Fig.
179.

•
SeLect and confirm
the
route which
you
would
like
to use for
route guidance.
When this function
is
switched
on
|vf,
up to
three
suggested routes
and
their characteristics
are

displayed
on the
overview
map
=>F/g.
179.

The following information
(if
available)
is
dis­
played
in the
route suggestions:
- Route type
(fast(T),
alternative
fast
(2),
eco­
nomical
routed))

- Distance
to
destination
and
estimated time
of

arrival
- Level
of
congestion
on the
route including
length
of
delay
The route which
was
calculated
on the
basis
of

the selected route criteria
is
highlighted
on the

overview map. Further information
on
particular
characteristics
of
your route
(4)<=*Fig.
179 is
also
shown
on the
display and read
out.

You
can use the
rotary pushbutton
to
preselect
the possible alternative routes
and
have them
displayed
on the map.
Select and confirm
the

route which
you
would Like
to use for
route
guid­

ance.

216