display AUDI TT COUPE 2017 Repair Manual

Navigation
Adding a stopover
Applies to: vehicles w ith navigation system
You can enter an additional destination when
route guidance is active.
Fig. 121 Example: current route guidance with stopove r
Requirement: a destination must already be en­
tered .
.. Press the
I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
c:> page 135, fig . 118.
Entering a destination as a stopover
-Enter a destination in the input line (D
c:>page 135, fig . 118.
- Select and confirm a destination from the re-
sults list.
- Se lect and confirm
Add as stopover .
Deleting a stopover
- Turn the control knob to the left until the active
route guidance is shown.
- Select and confirm
Delete stopover c:> fig. 121
under the stopover (D. Select and confirm the
system prompt if necessary. Th e stopover is de­
leted.
Additional options when entering a
destination
App lies to : ve hicles w ith navigation system
.. Press the right contro l button.
Depending on the selected function, the follow­
ing options may be available when entering a
destination:
l) Thi s fun ctio n is not offe re d in Mexico .
140 Cancel route
guidance:
Requirement: route guid­
ance must be active. Route guidance is canceled.
For additional information, see
c:> page 140.
Map settings : see c:> page 145.
Navigation settings : see c:> page 141.
Voice guidance : see c:> page 142.
Route criteria: see c:> page 142.
Show location on map : Requirement: you m ust
have selected a destina tion from the results list.
The destination entered is displayed on the map.
Parking at this location: Requirement: you must
have selected a destination from the results lis t.
A ll parking options near the selected location are
displayed in the Infotainment system .
Delete: the selected entry is deleted. Yo u can de­
lete indiv idual entries or all entr ies (for examp le,
favorites or la st destinations).
Audi connect at this location1>: Requ irement:
you must have selected a destination from the
results list. Allows yo u to search for it ems in the
vicinity of the selected location, such as
City
events or Travel information .
Online traffic data *:
receiving online traffic infor­
mation
c:> page 147 can be switched on or off.
Country/state selection: select all countries/
states from the list(~) that should be included
in the free text sea rch
c:> page 136.
Store as favorite : see c:> page 141.
Cancel route guidance
Applies to : vehicles wit h navigat ion syste m
Requirement: route guidance must be active .
.. Push the control knob up. Th e active route
guidance is displayed
c:> page 140, fig . 121 .
.. Select and confirm Delete destination or De­
lete stopover
under the desired lines
c:> page 140, fig. 121 . The destination is delet­
ed .
Or : select the right control button > Cancel
route guidance .

co
co
.... N
" N .... 0
0
Vl c:o
Home address
Applies to: ve hicles with navigation system
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢ page 135, fig . 118.
Storing a home address
- Se lect and confirm Home address
@¢page 135, fig. 118 . After opening the
home address for the first time, you will be
asked to create a home address.
- Se lect and confirm
Create now.
- Enter a destination or select a destinat ion from
the list.
Or :
-Se lect and confirm a destination > right control
button >
Store as home address .
A home address will be stored in the MMI regard­
le ss of the connected cell phone. This home ad­
d ress is always available even if a cell phone is
not connected to the MMI.
Editing the home address
-Select Home address @¢ page 135, fig . 118 .
-Select : right contro l button > Edit home ad -
dress .
-Se lect and confirm a new dest inat ion as the
home address.
The selected destination is stored as the new home address.
Favorites
Applies to: ve hicles with navigation system
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 135, fig. 118.
-Storing an existing destination as a favorite :
search for the desired destination using the in­
put f ield.
Or: select and confirm a dest ination
from the list. Select: right control button>
Store as favorite .
- Renaming favorites :
select: left control button
>
Favorites > a favorite from the list> right
contro l button >
Rename favorite.
- Moving favorites :
select the left control button
>
Favorites > a favorite from the list> right
Navigation
control button > Move favorite. Select and con­
firm the desired position.
- Deleting favorites : select and confirm a favo r­
ite > right control button >
Delete this favor­
ite
I Delete all favorites.
Di rectory contacts
Applies to : vehicles wi th navigat ion syste m
Two addresses (private/business) can be as­
signed as destinations for each contact in the di­
rectory.
~ Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 135, fig. 118.
Storing a destination as a contact in the
directory
Requirement: a cell phone must be connected to
the MMI.
- Select:
a destination > right contro l button >
Add destination to contact.
- Select and confirm Add business destination or
Add private destination.
-Enter a name . Or: select and confirm a directo­
ry contact from the list.
- Select and confirm
Save business card.
Additional settings
Navigation settings
Applies to: vehicles wit h navigat ion syste m
~ Press the INAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢ page 135, fig. 118.
~ Select: right control button> Navigation set-
tings .
Depend ing on the selected function, the fo llow­
ing settings can be selected :
Show alternative routes
Up to three route suggest ions and their proper­
ties are d isplayed on the overv iew map when the
function is switched on~-See
c;, page 142, Dis-
playing alternative routes . ...,
141

Navigation
Low fuel warning
A messag e is displ aye d if the fuel ga uge goes be­
low the reserve mar king when this f unct ion is
sw itche d on ~- Confirming t his message displays
a list of gas stations in the area. When a gas sta­
tion is selected, ro ute gu idance from the c urrent
veh icle position is calcu lated.
Notification when nearby*
T he notification w hen near by is s witched off at
the facto ry.
T he MM I notifi es you whe n you a re app roa ching
selec ted po ints o f interes t whe n this func tion is
sw itche d on ~- You can a lso have a
Notification
tone.
Presentation mode
T he p rese ntat ion mode he lps yo u to plan and fo l­
low a route wi tho ut m ov ing the veh icle. Y ou ca n
Select starting point when yo u wo uld like to cal­
cula te a route sta rting from a locat ion other than
the vehicle pos ition . Start presentation mode to
sim ulate route guidance.
Route criteria
Applies to: vehicles with navigation system
Jl
Fig. 122 Possible route c riteria
.. Pres s th e I N AV/MAPI button repeate dly until
the
Enter destination menu is disp layed
c::;, page 135, fig. 118 .
.. Se lect: rig ht contro l butto n > Route criteria.
(!) HOV lane s/carpool lanes1l: whe n the Avoid
fu nction is switc hed o n, HOV lanes or carpool
lanes are not incl uded in the route calc ulation.
l) High occupa ncy vehicle
142
With allow , th e MMI will gui de you using HOV
and ca rpool lanes an d it will indicate them .
@Highways /@ Toll roads / @ Ferries : if the n avi ­
g ation sys tem should not incl ude highw ays, toll
r oads or ferries -if poss ible -when calculat ing
routes, you can select the
Avoid f u nction .
Voice guidance
Applies to: vehicles with navigation system
.. Press the I NAV/MAPI button repeatedly unti l
the
Enter destinat ion men u is displayed
c::;,page 135, fig. 118.
.. Select : right control button> Voice guidance.
Voice guidance :
voice guidance can be complete
or shortened . With the Traffic function, voice
guidance prompts are o nly given when there are
traff ic incid ents on your route. Whe n
Off is se­
l ect ed, no voice guid ance is given.
Voice guidance during phone call : voice guid­
ance d uring a phone call can be switched on or
off.
Entertainment fader : c::;, page 178.
Voice guidance volume : c::;, page 178.
Displaying alternative routes
Applies to : vehicles with navigation system
Fig. 1 23 Alterna tive routes display
Requirement: a dest inat io n m ust be entered and
t h e route guida nce must be started.
.. Press the
I NAV/MAPI bu tton repeatedly u nti l
the
Enter destination men u is displayed
c::;,page 135, fig. 118.

CD co .... N
" N ...... 0
0
Ill co
.. Select: right control button > Show alternative
routes.
Up to three route suggestions and their proper­
ties are displayed on the map when this function
is switched on¢ fig.
123.
If available, the following information will ap­
pear on the route suggestions:
- Route type (fast@, fast alternative @, eco­
nomic route@)
- Distance to the destination and the calculated arrival time
- Heavy traffic along the route including time de­
lays
Map
Operating the map
A pp lies to: ve hicles with naviga tion sys tem
Escondido Fwy
Escondido
Fig. 124 Diagram: map with cross hairs tu rned on
Fig. 125 Diagram: map with cross hairs turn ed off
Navigation
The route that was calculated according to the
route criteria you selected is shown on the map.
The special properties of the route (such as ferry
connections) may be displayed @qfig.
123. Ad­
ditional information about individua l route crite­
ria can be found in
¢page 142 .
Using the control knob, you can select the possi­
ble routing for the alternative routes and show
them on map Select and confirm the desired
route that you would like to use for route guid ­
ance.
143

Navig ation
"' Press the I NAV/MAPI button repeated ly until
the map is disp layed
¢ fig. 125 .
Zo oming in /out on the m ap
- T urn the control knob to the left or to the right .
As an alternat ive, you can a lso zoom in/out on
the map using the MMI touc h
¢page 100. Or:
turn the left thumbwheel on the mu ltifunction
steering wheel*¢
page 20 .
Turning th e cros shair s on /off
- Sw itching the crosshai rs on :
press the control
knob in the map view .
-Sw itching the crossh air s o ff : press the I BACKI
button.
When the crosshairs are switched on ¢ fig. 124:
(D Orientation : the map is eithe r displayed as a
2D n orth up m ap or a 2D hea ding up map.
@ Scale: turn the control knob to the left or
right to decrease or increase the scale .
@ Zoom: when the Automa tic zo om func tion is
sw itched on, an "A" for "Automatic" is dis ­
p layed in the magnifying g lass.
© Crosshairs: move the crossha irs in the de­
sired direction using the MM I touch control
pad and set a po int on the map as the desti­
nation or have information about the focal
point displayed.
® Map content (points of interest, favorites) : if
there are mu ltiple POis in the immediate vi­
cinity, they will be shown stacked on the
map .
@ Addit io nal info rmation on the crosshairs po­
sition : if you move the c rosshairs to a loca­
tion on the map, avai lab le information for
the current crossha irs position is displayed.
Press the control knob to open destination
deta ils or to start route guidance. When the
crossha irs are turned off, the road being cur­
rently driven on is shown .
0 Display of an upcoming ma neuver. If the re is
n o upcoming maneuver, the distance and cal­
culated arrival time to the destination/stop­
over is disp layed in this location.
l ) O nly app lies to veh icl es withou t camer a-b as ed speed limi t
dis play .
144
@ Display of a better route. For additional in for ­
mation, see
¢ page 149.
When the cro ssha ir s are swit ched off ¢ fig. 125:
® If a turn arrow is d isplayed, a bar graph turns
on. The fewe r bars are shown , the shorter the
distance is until the turn.
@ Speed limit display1>: d isp lay of the max i­
mum permitted speed on the expressways
and highways.
@ Road current ly being driven on . When t he ve­
hicle is stat iona ry, "off road " is displayed
here.
@ Vehicle location (@)
@ Display of active traffic information
dO NLIN EI* or I TM Cb
@ Altitude disp lay (.d\)
@ Route information : various information will
be displayed dur ing active route guidance
(for example, the upcom ing maneuver in­
cl ud ing ca lculated distance and street
names). The d isplay a lso provides traff ic in­
format ion or points of interest on the current
route.
Map functions
Appl ies to: vehicles wit h navigat ion syste m
"'Press the I NAV/MAP I button repeatedly until
the map is displayed
¢ page 143, fig. 125.
"'Select: left control button > desired function.
Switch to de stination input
The Ente r de stination menu is disp layed
¢ page 135, fig. 118 .
Traffic messages
Cu rrent traffic informa tion is displayed in the In­
fot ainment system display. See
¢ page 147.
Route list
The route list can only be displayed when route
guidance is active and conta ins informat ion re­
gard ing the ro ute, the names of the streets and
t h e lengt h of t he ro ute sections. When traveling
jll,-

co
co
.... N
" N .... 0
0
Vl c:o
on highways, possible parking lots and rest a reas
are shown, which you can select as a stopover .
POis along the route
Requirement: route gu idance mus t be ac tive .
Searching for points of interest along you r cur ­
rent ro ute See
¢ page 138.
Additional options on the map
Applies to: ve hicles with navigation system
.,. Press t he I NAV/MAPI button repeated ly until
the map is d isplayed
¢ page 143 , fig. 125.
.,. Press t he right contro l bu tton.
Depending on the f unction selec ted , the follow­
i n g options can a lso be se lected unde r the
Map
menu :
Cancel route guidance : see¢ page 140 .
Map settings : see ¢ page 145 .
Route criteria : see ¢page 142 .
Voice guidance : see ¢page 142.
Navigation setting s: see¢ page 141 .
Online traffic data* : see ¢ page 147 .
Show alternative routes : see¢ page 142.
Parking along the route : parking options near
the veh icle are disp layed.
Save current po sition : you can save your current
ve hicle position as a favor ite ¢
page 141 or save
i t as a contact in the directo ry ¢
page 141 .
Audi connect at this locat ion *: allows you to
search for
City events or Weather at the entered
l ocat io n.
Country info rm ation : you can disp lay the appli­
cable urban and rural speed limits for any coun­
try/state. This information w ill be automatically
shown to you in the route information @
¢
page 143, fig . 125 when the speed lim it is ex­
ceeded, if this function is act ivated ¢
page 14 6.
Avoid route *: when route gu idance is active, the
calculated ro ute w ill avoid the area you have
spec ified (max imum : 12 m i (20 km)), if possible .
The navigation system ca lcula tes a n alternat ive
Na vigation
route. The route to be avo ided that you have en ­
te red applies only to the cur rent route and must
be set agai n, if needed. The areas you have se ­
l ected to avoid w ill appea r with red and white
shading on the map .
Map settings
Applies to: vehicles wit h navigat ion syste m
.,. Press the INAV/MAPI button repeatedly until
t he map is displayed
¢ page 143, fig . 125 .
.,. Sele ct: r igh t cont rol b utton > Map settings .
Depending on the selected function, the fo llow­
i ng setti ngs can be selected:
Map colors
Day /Night :
the map is displayed with a light/
dar k background.
Automatic : when the lights switch on, the map
colors switch from day to n ight .
Map display
Standard
¢ page 143, fig . 124.
Google Earth * ¢page 146 , fig. 126.
Traffic ¢ page 147.
Map orientation
Destination :
th e map i ndic ates the destin ation
and is or ien ted to the no rth .
2D heading up map /2D north up map : the cu r­
r ent vehicle pos it ion is d isplayed . T he map is or i­
en ted in the d irect io n of t ravel o r to the no rt h .
3D map : when this func tion is sw itched on, the
cu rrent veh icle posit io n is shown on a three-di­
mens iona l map and orien ted in the d irec tion of
t ravel. At a sca le o f 62 mi ( 100 k m) and la rge r,
the ma p orientation is to the north.
Overview : th e en tire route from the veh icle pos i­
tion to the des tina tion o r the ne xt stopover is dis­
played on the map. The m ap s cale depends on
the leng th of the ro ute a nd adapts au tom atically .
The map is orie nte d to the north .
Ill>
145

Navigation
Route information
The display of route information such as the cur­
rent road being driven on, upcoming maneuvers,
traffic information or points of interest along the
route can be switched on/off.
Automatic zoom
On: the map scale is adapted automatically de­
pending on the type of road being traveled (ex­
pressway, highway, other roads) so that you al­
ways have an optimal overview of the road ahead.
The scale is also automatically adapted when
there are upcoming maneuvers to provide a bet­
ter detailed view.
Off: the map scale you have chosen is kept .
Map content
Map content, such as traffic information, favor­
ites or restaurants, can be displayed or hidden
(~).
Online map display
App lies to: ve hicles with navigation system and Audi connect
With the online map view, you con display the
mop with satellite images.
F ig . 126 Online map view
F ig. 127 Map view with on line Street V iew
Requirement: the requirements for Audi con nect
must be met ¢
page 126.
146
.,. Press the I NAV/MAPI button repeatedly until
the map is displayed.
.,. Select: r ight control button>
Map settings>
Map display
> Google Earth.
The map display is based on data packets re­
ceived from the Internet in the form of satellite
images, which are then combined with the road­
ways from the
Standard map view. There are two
gigabytes of memory space in the MMI memory
that can be used to temporarily store the map or
navigation data that was rece ived . This is roughly
the amount required for the map/ navigation data
fo r a 2,485 mile (4,000 km) route. As long as the
satellite images loaded for route guidance are
stored, you can use them without having an ac­
tive data connection .
Street View
With Street View, you can explore many places in
the world through the eyes of a pedestrian.
Street View is available when the symbol
(J)¢ fig. 126 is displayed in the crosshairs mode.
Activating street view: turn the control knob to a
sca le less than 32 ya rds (30 m) .
The following functions are then available :
-Exploring an area step-by-step : press the con­
trol knob when the symbol@ is displayed.
-Zooming in or out on the current view in four
stages :
turn the control knob to the left or to
the right @.
-Navigating in street view: move your finger on
the MMI touch in the desired direction.
Additional information
Showing additional information in the Infotain­
ment system display can be switched on in the
Map content menu ¢page 146. To display any
applicable additional information, move the
crosshairs onto an item on the map and press the
control knob.
(D Tips
- The stored online map view data can be de­
leted in
Factory settings > Navigation and
online memory
9 page 175.

CD
CD
.... N
" N ...... 0
0
Ill co
-The online map view is an Audi connect serv­
ice and is regularly updated when the func ­
tion is opened. The process may take several
seconds.
- When the on line map view is switched on
us ing the 30 map orientation, the MMI dis­
play automatically switches to the 20 map
orientation when driving through tunnels.
- For safety reasons, the Street View func­
tions can only be used when the vehicle is
stationary.
- Always read the chapter
c:::> page 132 .
Online traffic information
Applies to: ve hicles with navigation system and Audi co nnect
Na vigat ion
-Add ition al information can be found under
www .audiu sa .com/audiconnect .
Accessing traffic
information
Auto rerouting (traffic)
Applies to: vehicles wit h navigation syste m
When receiving traffic information t hrough TMC/
online -depending on availability -you can have
the MMI navigate you around traffic incidents, if
poss ible.
Reception of traffic information is indicated by
the ITMC ! or ION LINE I symbo l on the map
c:::> page 147, fig. 128.
The MMI con receive real-time traffic information about congestion accidents, rood construction and
other incidents from the Internet.
Fi g. 12 8 Example : o nline traffic information d isplay * without better ro ute
Requirement: the requirements for Audi connect
must be met
c:::> poge 126.
• Press the I NAV /MAP I but ton repeated ly until
the map is displayed.
• Se lect: right contro l button
> Online tr affic da ­
ta >
On( ~).
• Select : left control button > Traff ic messages.
The traffic information overv iew is shown.
Depending on vehicle equipment, the following
information may be shown in the traff ic informa­
tion overview
c:::> fig. 128:
© A message will appear if the M MI calcu lates a
better route for the current route g uidance .
More information can be found under
c:::> page 149 .
@ The s tat us line in the Infotainmen t display
indica tes the recept ion of traffic information
(ITMCI or! ONLINEI) .
@ The current se lected traffic message is also
shown as a map preview in the Infotainment
system display .
IJl,
147

Navig ation
© Color-coded markings along the route indi -
cate the traffic flow@.
Traffic display
Gr een:
traffic is flowing freely
Red : congest ion
Orange : stop-and-go traffic
Shaded markings indicate the leng th of the area
with congestion .
Colored warning symbol s: there is a t raffic inci­
dent immediate ly ahead on the route.
Gra yed o ut w arning symbols : traffic inc idents
that are not on yo ur route .
Red warning s ymbo ls : all warning symbols will
be red when route guidance is not active .
The display of colored markings, warning sym­ bols, etc. can be set in the
Map content menu
c::;,page 146
You can switch off the reception of on line traffic
information at any time
¢ page 147.
Sw itching the traff ic map display on
F or an optimum traffic information display:
I NAV/MAPI bu tton > right cont rol button> Map
se tting s > Map di spla y> Traffi c.
You can a lso display the onlin e traffi c informa ­
ti on
in the on line map view c::;, page 146 or i n the
s tanda rd map view
c::;, page 143, fig. 124.
(D Tips
- Online t raff ic information is not available in
Canada.
- Always read the chapter
c::;, page 132, About
Audi connect.
- Every vehicle with the On line traffic d ata
funct ion sw itched on has the most accu ra te
r eports of traffic s ituations as well as t raff ic
forecas ting . You r vehicle transmits and
processes its anonymous, encrypted posi­
tion information at regular intervals to the
traffic data provider. If yo u do not want to
use this, you can switch
off the online traf ­
fic info rm ation
function at any time.
148 -
The
online traffic information network is
currently not available in all countries, and
the coverage is not nationwide . Addit ional
information can be found under
www .audiusa.com /audiconnect .
· Traffic information (TMC)
App lies to: vehicles with navigat ion system
.., Press the I NAV /MAPI button repeatedly until
the map is displayed .
.., Select: left control b utton
> Traffic me ssages .
TMC traffic messages are switched on at the fac­
tory.
Mult iple traffic messages are summari zed in the
overview under the correspond ing street names
or highway names .
-Displaying all traffi c me ssage s for a street/
highway :
select and conf irm the [ill symbol. A
list of all the traff ic messages for the selected
street/highway is disp layed .
-Opening the detailed vie w of a traff ic mes­
s a ge :
if you select an entry from the list , the
traffic information w ill be shown as a map pre ­
view @
c::;, page 147, fig. 128. Select and con­
firm a t raff ic message to d isplay the details fo r
tha t message.
- Displaying th e sele cted traffic message on the
map :
select and confi rm the right cont rol but­
ton >
Show on map .
- Di spl aying th e next traffic mes sage on the
map :
press the con trol knob.
Traffic information display
C olor ed warn ing symbol s:
traffic incidents o n
your route are shown in the upper sect ion of the
li st and are sorted acco rding to d istance .
Warning symbols with ~: avo ided traffic inci­
dents.
Grayed out warn ing symbol s: traffic incidents
that are not on your route. They are sorted ac­ cording to road type (expressway, highway, other
road), country and name .
Shaded markings indicate the length of the area
with congest ion. ...,

co
co
.... N
" N .... 0
0
Vl c:o
@ Tips
Critical traffic information, such as warnings
about wrong-way drivers, is automatically dis­
played. To hide the traff ic information, press
the
I BACKI button or the control knob.
- TMC traffic reports are not ava ilable in Can­
ada. For more information, please contact
Sirius Canada.
Better route
App lies to: veh icles with navigation system
By receiving traffic information through TMC,
your MMI calculates a better route -if available -
and the possible time saved for the current route
guidance. You con decide yourself which route
you would like to use .
.,. Press the I NAV/MAPI button repeatedly until
the map is displayed .
Troubleshooting
Applies to: veh icles with navigation system
Problem Solution Na
vigation
Requirement:
Route guidance must be active.
If your MMI has calculated a better route than
the current route guidance, the message
A better
route is available.
appears on the map a long
with the time that may be saved. A better ro ute
is i ndic ated in the map view by the symbol
rS@
¢ page 143, fig . 124.
Accept better route
Requirement: the ta symbol must be shown on
the map .
- Press the right control button.
- Select and confirm the better route.
- The better route is used for the remaining
route guidance and the route is recalcu lated .
Free text search: the desired des- The dest ination might not be entered in the navigation database .
t i nation cannot be found .
Or: check the spelling of the search term and whether the right
country/state was selected using the
Country/state selec -
tion ¢
page 136 for the free text search.
149