CHEVROLET VOLT 2011 Owner's Manual

Black plate (91,1)Chevrolet Volt Owner Manual - 2011
Infotainment System 7-91
Voice Pass-Thru
Voice pass‐thru allows access to
the voice recognition commands on
the cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press
bg. Say “Hands Free”
after the tone.
2. Say “Bluetooth.” The system
responds “Bluetooth ready,”
followed by a tone.
3. Say “Voice.” The system
responds “OK, accessing
<phone name>.”
The cell phone&#39;s normal prompt
messages will go through their
cycle according to the phone&#39;s
operating instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and numbers stored as
name tags during a call. Use this
feature when calling a menu-driven
phone system. Account numbers
can also be stored for use.
Sending a Number or Name Tag
During a Call
1. Press
b g. The system
responds “Ready,”followed
by a tone.
2. Say “Dial.”
3. Say the number or name tag to send.
Clearing the System
Unless information is deleted out
of the in‐vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags in
the phone book and phone pairing
information. For information on how
to delete this information, see the
previous sections on “Deleting a
Paired Phone” and“Storing and
Deleting Phone Numbers.”

Black plate (92,1)Chevrolet Volt Owner Manual - 2011
7-92 Infotainment System
Pairing a Phone Using the
Infotainment System
The pairing process can be started
by using the controls on the
infotainment system.
1. Press the CONFIG button.Turn the TUNE/MENU knob
until the Phone menu displays.
Press the TUNE/MENU knob or
press the Phone screen button
to display other options.
2. Turn the TUNE/MENU knobuntil Bluetooth displays. Press
the TUNE/MENU knob or press
the Bluetooth screen button to
display other options.
3. Select “Add new Phone.”
The pairing process will begin
searching for Bluetooth devices
on the cell phone. See the cell
phone manufacturer&#39;s user guide
for information on this process.On the cell phone, locate the
device named “Your Vehicle.”
Follow the instructions given on
the cell phone or follow the voice
prompts, to enter the four-digit
Personal Identification Number
(PIN) that has been provided.
4. The system voice prompt requests a name for the phone
being paired. Use a name
that best describes the phone.
The system voice prompt then
repeats the name you provided
for confirmation; say “Yes.”
5. The system responds with “phone name has been
successfully paired” after the
pairing process is complete.

Black plate (93,1)Chevrolet Volt Owner Manual - 2011
Infotainment System 7-93
Listing All Paired and Connected
Phones
1. Press the CONFIG button.Turn the TUNE/MENU knob
until the Phone menu displays.
Press the TUNE/MENU knob or
press the Phone screen button
to display other options.
2. Turn the TUNE/MENU knobuntil Bluetooth displays. Press
the TUNE/MENU knob or press
the Bluetooth screen button to
display other options.3. Turn the TUNE/MENU knob untilDevice List displays. Press the
TUNE/MENU knob or press the
Device List screen button to
display other options.
A list of all previously paired
phones will be displayed. If there
is a currently connected phone,
a checkmark will appear on the
right side of the phone name.

Black plate (94,1)Chevrolet Volt Owner Manual - 2011
7-94 Infotainment System
Deleting a Paired Phone
1. Press the CONFIG button.Turn the TUNE/MENU knob
until the Phone menu displays.
Press the MENU knob or press
the Phone screen button to
display other options.
2. Turn the TUNE/MENU knob
until Bluetooth displays. Press
the TUNE/MENU knob or press
the Bluetooth screen button to
display other options.3. Turn the TUNE/MENU knob untilDevice List displays. Press the
TUNE/MENU knob or press the
Device List screen button to
display other options.

Black plate (95,1)Chevrolet Volt Owner Manual - 2011
Infotainment System 7-95
4. Turn the TUNE/MENU knob,then press it to select the
phone to be deleted. Follow
the on-screen prompts to delete
the device from the system.
5. Once a phone has been deleted, the only way to connect back to
that phone is to pair the phone
again. Linking to a Different Phone
To link to a different phone, the
new phone must be in the vehicle
and available to be connected to
the Bluetooth system before the
process is started.
1. Press the CONFIG button.
Turn the TUNE/MENU knob
until the Phone menu displays.
Press the TUNE/MENU knob or
press the Phone screen button
to display other options.
2. Turn the TUNE/MENU knob untilBluetooth displays. Press the
TUNE/MENU knob or press
the Bluetooth screen button
to display other options.

Black plate (96,1)Chevrolet Volt Owner Manual - 2011
7-96 Infotainment System
3. Turn the TUNE/MENU knob untilDevice List displays. Press the
TUNE/MENU knob or press the
Device List screen button to
display other options.4. Select the phone to be linkedand then follow the on-screen
prompts.5. The Phone menu will bedisplayed with the name
of the phone linked.

Black plate (97,1)Chevrolet Volt Owner Manual - 2011
Infotainment System 7-97
Making a Call
PressV/0on the infotainment
system, to access the Phone Menu.
Enter Number
Use this option to enter a phone
number and make a call.
1. Turn the TUNE/MENU knob, then press it to select Enter
Number selection. A dial pad
displays.
2. Enter the phone number bypressing the numbers on the
keypad.
3. Press the Call button on the screen to make the call. Phone Book
The phone book can be accessed
by pressing the Phone Book
selection on the Phone Menu
screen.
Turn the TUNE/MENU knob to
select the person or place to call.
Press the TUNE/MENU knob or
press the desired person or place
to display the number. Press the
TUNE/MENU knob or press the
number to make the call.

Black plate (98,1)Chevrolet Volt Owner Manual - 2011
7-98 Infotainment System
The Phone Book feature also has a
search menu that can be accessed
by pressing that option screen
button. Once the Search menu
displays, turn the TUNE/MENU
knob to scroll through the list, then
press the TUNE/MENU button to
select the desired list item. These
lists are saved in alphabetical order.Press the TUNE/MENU knob or
press the appropriate search line
to obtain the numbers of the listed
persons or places that have been
saved.
Call Lists
The Call Lists selection from the
Phone Menu screen can be used
to show a list of incoming calls,
outgoing calls, and missed calls.
1. Press the CONFIG button.
Turn the TUNE/MENU knob
until Phone displays. Press the
MENU knob or press the Phone
screen button to display other
options.

Black plate (99,1)Chevrolet Volt Owner Manual - 2011
Infotainment System 7-99
2. Turn the TUNE/MENU knob,then press this knob or press
either Incoming Calls, Outgoing
Calls, or Missed Calls.
Once one of these options has been
selected, a pop-up menu displays.
A list of persons and places will
display for the selected option.
Turn the TUNE/MENU knob,
then press this knob or press
the appropriate screen button to
select someone on that list. A menu
displays showing the phone number
for that person.
Accepting or Declining an
Incoming Call
When an incoming call is received,
the audio is muted and a ring tone
sounds.
Accepting a Call
Press the appropriate screen button
for the Answer option on the screen
to answer the call.
Declining a Call
Select the Decline option on the
screen.

Black plate (100,1)Chevrolet Volt Owner Manual - 2011
7-100 Infotainment System
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Switching Calls (Only Available
with Call Waiting)
This feature allows switching
between calls, making one call
active, and placing the other
on hold.
Switch Call:Turn or press the
TUNE/MENU knob to Switch Call
and press Enter or press the Switch
Call option.
Conference Calling
Conference and three-way calling
must be supported on the Bluetooth
phone and enabled by the wireless
service carrier to work.
To start a conference while in a
current call:
1. Press
V/0on the infotainment
system until the Phone main
screen is shown with the current
active call.
2. Select Enter Number on the screen.
3. Make another call. The first
call will be placed on hold while
the second call is dialing and
connected.
4. To make a conference call, select Merge Calls and
both calls merge into one
conference call.
5. To add more callers to the conference call, repeat Steps 2
through 4. The number of callers
that can be added is limited by
your wireless service carrier.