start stop button Citroen C4 RHD 2015 2.G Owner's Manual

21 
Warning/indicator lampis onCause Action/Observations
Foot on the clutch** fixed.In
  the   STOP
 
mode   of   Stop   &
Start,
  changing   to   START
 mode

  is   refused   because   the  
clutch

  pedal   is   not   fully   down.You
  must   declutch   fully   to   allow   the  
change

  to   engine   START
 
mode.
**

Only on the two-tone instrument panel without audio system.
Dynamic
stability control (DSC/ASR) flashing.
Regulation   by   the   system   is  
active.
The
  system   optimises   traction   and  
improves

  the   directional   stability   of  
the vehicle.
fixed, associated with
  illumination   of  
the

  indicator   lamp  
in

  the   deactivation  
button,

 
accompanied
 
by

  an   audible   signal  
and

  a   message.
The DSC/ASR or hill start assist  system   has   a   fault.Have
  it   checked   by   a   CITROËN   dealer   or  a
  qualified   workshop.
Power
steering fixed.The
  power   steering   has   a  
fault. Drive

  carefully   at   reduced   speed.
Have
  it   checked   by   a   CITROËN   dealer   or  
a

  qualified   workshop.
Under-inflation fixed.
The
  pressure   in   one   or   more  
wheels

  is   too   low. Check
  the   pressure   of   the   tyres   as   soon  
as

  possible.
This
  check   should   preferably   be   carried  
out

  when   the   tyres   are   cold.
+ flashing
 
then

 
fixed,
 
accompanied

 
by the Service warning

 
lamp. The
  tyre   pressure   monitoring  
system

  has   a   fault   or   no  
sensor

  is   detected   on   one   of  
the

  wheels. Under-inflation
  detection   is   not   assured.
Have
 
the
 
system
 
checked
 
by
 
a
 
CITROËN
 
dealer

  or   a   qualified   workshop.
Directional
headlamps flashing.The
  directional   headlamps  
system

  has   a   fault. Have
  it   checked   by   a   CITROËN   dealer   or  
a

  qualified   workshop.
1
MONITORING

22
43 
TRIP COMPUTER
Monochrome

screen A
Information displays The  
trip
 
computer
 
provides
 
the
 
follow
-
ing   information:
-  
range,
-
 
current
  fuel   consumption,
-  Stop   &   Start   time   counter,
-  
distance
  travelled,
-
 
average
  fuel   consumption,
-
 
average
  speed.
F
 
Press
 
the
 
button,
 
located
 
at
 
the
 
end
 
of the

wiper stalk,  
to
 
display
 
the
 
various

 
items
 
of
 
trip
 
computer
 
infor
-
mation
  in   succession.
System
 
that
 
gives
 
you
 
information
 
on
 
the

 
current
 
journey
 
(range,
 
fuel
 
con
-
sumption…).
F  Press  the  control  for  more  than  
two

 
seconds
 
to
 
reset
 
to
 
zero
 
the
 
distance

 
travelled,
 
the
 
average
 
fuel

 
consumption
 
and
 
the
 
average
 
speed.
Zero reset
F
 
The
 
next
 
press
 
then
 
returns
 
you
 
to
 
the

  normal   display.
MULTIFUNCTION SCREENS

22
44 
Monochrome screen C
You can choose between two types of
display  by   pressing   button   A:
-
 
the trip  computer  information  appears temporarily
 above  the  audio  informa -
tion,
 
displayed
 
permanently
 
in
 
full screen,
or
-  
the
 
trip
 
computer
 
and
 
audio
 
infor
-
mation
 
both
 
appear
 
permanently
 
in
 
a

  shared   screen.
Information displays
-  
the
 
current
 
information
 
tab
 
with:
●
 
the
  range,
●  
the current fuel
consumption,
● the
  Stop   &   Start   time  counter
,
-
 
the
  trip   "1"   tab   with:
●
 
the
  distance   travelled,
●
 
the
  average   fuel  
consumption,
●

 
the
  average   speed,
 for

  the   first   trip. -
 
the
  trip   "2"   tab   with:
●  
the
  distance   travelled,
●  
the
  average   fuel  
consumption,
●
 
the
  average   speed,
 for

  the   second   trip.
F
 
Press

 
the
 
button,
 
located
 
at
 
the
 
end
 
of the

wiper stalk,  
to
 
display
 
the
 
various

 
trip
 
computer
 
tabs
 
in
 
suc
-
cession.
F
When the trip  required  is  displayed, press
 the  button  on  the  end  of  the  wiper stalk

  for   more   than   two   seconds.
Trips "1"  and  "2"  are  independent  but  their
  use   is   identical.
For
 
example,
 
trip
 
"1"
 
can
 
be
 
used
 
for
 
daily

 
figures,
 
and
 
trip
 
"2"
 
for
 
monthly
 
figures. T
rip zero reset
MULTIFUNCTION SCREENS

22
45 
Colour screen
Display modesInformation display
F
 
Press
 
this
 
button,
 
located
 
on
 
the
 
end

 
of
 
the
 
wiper stalk
,  
to
 
display
 
the

  following   information   in   turn:
●
 
current
  information,
●
 
trip
  "1",
●
 
trip
  "2",
-
 Current

 
information
 
is
 
displayed
 
in the

 
screen,
 
depending
 
on
 
the
 
context:
●

 
the
  range,
●
 
the
  current   fuel   consumption,
●
 
Stop
  &   Start   time   counter,


or
●
 
the
  remaining   distance   to   go.Trip zero reset
F
 
When
 
the
 
required
 
trip
 
is
 
displayed,
 
press

 
the
 
button
 
on
 
the
 
end
 
of
 
the
 
wiper stalk

 
for
 
more
 
than
 
two
 
sec
-
onds.
Trips "1"
 
and
 
"2"
 
are
 
independent
 
but
 
their

  use   is   identical.
For
 
example,
 
trip
 
"1"
 
can
 
be
 
used
 
for
 
daily

 
figures
 
and
 
trip
 
"2"
 
for
 
monthly
 
figures.
F

 
Press
 
the
 
button
 
on
 
the
 
end
 
of
 
the
 
wiper stalk

 
to
 
display
 
the
 
trip
 
com
-
puter
 
information
 
temporarily
 
in
 
a
 
new

  window. F

Press the button on the
eMyW

ay front panel,
to  display  continuously  the
 trip  computer  infor -
mation. -
 
The
  trip   "1"   screen   displays:
●  the   distance   travelled,
●  the   average   fuel   consumption,
●
 
the
  average   speed,  
 
for

  the   first   trip.
-
 
The
  trip   "2"   screen   displays:
●
 
the
  distance   travelled,
●
 
the
  average   fuel   consumption,
●
 
the
  average   speed,  
 
for

  the   second   trip.
MULTIFUNCTION SCREENS

33
53 
For maximum cooling  or  heating  of
 the  passenger  compartment,  
it

 
is
 
possible
 
to
 
exceed
 
the
 
mini
-
mum
 
value
 
14
 
or
 
the
 
maximum
 
value

  28.
F

T
urn control 2 or 3 to the left
until "LO"
 
is
 
displayed
 
or
 
to

 
the
 
right
 
until
 
"HI"
 
is
 
dis
-
played.
See "Front  demisting  -  defrosting".
4. Automatic visibility programmeManual operation
If you wish,  you  can  make  a  dif ferent  choice
 from  that  of fered  by  the  system  
by

 
changing
 
a
 
setting.
 
The
 
the
 
"AUT
O"
indicator
 
lamps
 
go
 
of
f;  
the
 
other
 
func
-
tions
 
will
 
still
 
be
 
controlled
 
automati
-
cally.
F
 
Pressing
 
the
 
"AUT
O" button returns
the
 
system
 
to
 
completely
 
automatic
 
operation.
2. Driver's side adjustment
The

 
driver

 
and

 
front

 
pas

-
senger
 
can

 
each

 
adjust

 
the

 
temperature

 
to

 
their

 
require

-
ments.
F

T

urn control 2 or 3 to the left or to
the
 
right

 
respectively

 
to

 
decrease

 
or

 
increase

 
this
 
value.
A
 setting

 
around

 
the

 
value

 
21

 
provides

 
optimum

 
comfort.

 
However

,
 
depend

-
ing
 
on

 
your

 
requirements,

 
a

 
setting

 
be

-
tween
 
18
 
and
 
24
 
is
 
normal.
You
 
are

 
advised

 
to

 
avoid

 
a

 
left

 
/

 
right

 
setting

 
difference
 
of
 
more
 
than
 
3.
3. Passenger's side adjustment
The
 
value

 
indicated

 
on

 
the

 
display

 
cor

-
responds
 
to

 
a

 
level

 
of

 
comfort

 
and

 
not

 
to

 
a

 
temperature

 
in

 
degrees

 
Celsius

 
or

 
Fahrenheit. With

 
Stop

 
&

 
Start,

 
when

 
dem

-
isting
 
has

 
been

 
activated,

 
the

 
ST

OP
 

mode
 
is
 
not
 
available.
COMFORT

33
55 
Switching the system off
Avoid prolonged operation  in  in -
terior  air  recirculation  mode  or  
driving

 
for
 
long
 
periods
 
with
 
the
 
system

 
of
f  
(risk
 
of
 
misting
 
and
 
deterioration

  of   air   quality).
On stopping the engine
-
 
While

 
the

 
control

 
screens

 
remain

 
on:

 
the
 
function
 
is
 
available.
-
 
Pressing

 
the

 
REST

button activates
the
 
ventilation

 
for

 
a

 
few

 
minutes.

 
a
ctivation of the function is con-
firmed
 
by

 
the

 
display

 
of

 
two

 
dashes

 
in

 
the

 
control

 
screens

 
and

 
four

 
air

 
flow

 
level
 
indicator
 
lamps.
 Locking

 
the

 
vehicle

 
has

 
no

 
ef

fect
 
on

 
this

 
function.
-
 
The

 
control

 
screens

 
go

 
of

f
 
at

 
the

 
end

 
of
 
this
 
period.
 Pressing

 
again

 
before

 
the

 
end

 
of

 
the

 
period

 
interrupts

 
of

f
 
the

 
ventila

-
tion
 
definitively:

 
the

 
control

 
screens

 
go

 
of

f
 
and

 
the

 
function

 
is

 
no

 
longer

 
available. F
 
T
urn  
the
 
air
 
flow
 
control
 
to
 
the

 
left
 
until
 
all
 
of
 
the
 
indi
-
cator   lamps   go   off.
This
 
action
 
switches
 
of
f  
the
 
air
 
condi
-
tioning   and   the   ventilation.
Temperature  
related
 
comfort
 
is
 
no
 
long
-
er
 
assured
 
but
 
a
 
slight
 
flow
 
of
 
air
,  
due
 
to

 
the

 
movement
 
of
 
the
 
vehicle,
 
can
 
still
 
be

 
felt.
F
 
Modify
 
the
 
settings
 
(temperature,
 
air

 
flow
 
or
 
air
 
distribution)
 
or
 
press
 
the
"AUT
O" button to reactivate the
system  
with
 
the
 
values
 
set
 
before
 
it
 
was

  switched   off.
This
 switch
 does
 not
 operate
 the
 air
 
conditioning,
 
only
 
the
 
air
 
fan.
When the "REST" function is ac-
tivated,
 
you

 
cannot

 
modify

 
the

 
temperature,

 
air

 
flow

 
and

 
distri

-
bution
 
settings:

 
these

 
are

 
con

-
trolled
 
automatically

 
according

 
to

 
the
 
ambient
 
temperature.
This function is not available in
the
 
STOP
 

mode
 
of
 
Stop
 
&
 
Start.
COMFORT

33
56 
FRONT DEMIST - DEFROST
These markings on  the  control  panel
 indicate  the  control  po -
sitions
 
for
 
rapid
 
demisting
 
or
 
defrosting

 
of
 
the
 
windscreen
 
and

  side   windows.
With manual air conditioning
F Put the  temperature,  air  flow  and distribution
 controls  to  the  dedicated marked

  position.
F
 
Put
 
the
 
air
 
intake
 
control
 
to
 
the
 
"Exterior

  air   intake"   position  
 
(indicator

  lamp   on   the   control   off).
F
 
Switch
 
on
 
the
 
air
 
conditioning
 
by pressing

 
the
 
"A/C"
button; the warn-
ing
  lamp   in   the   button   comes   on.
REAR SCREEN DEMIST - DEFROST
The control button  is  located  on
 the  air  conditioning  system  
control

  panel.
Switching on
The rear  screen  demisting/defrosting  can
 only  operate  when  the  engine  is  
running.
F

 
Press
 
this
 
button
 
to
 
demist/defrost
 
the

 
rear
 
screen
 
and
 
(depending
 
on
 
version)

 
the
 
door
 
mirrors.
 
The
 
indi
-
cator
 
lamp
 
associated
 
with
 
the
 
but
-
ton
  comes   on.
Switching off
The demisting/defrosting  switches  of f  automatically
 to  prevent  an  excessive  
consumption

  of   current.
F
 
It
 
is
 
possible
 
to
 
stop
 
the
 
demisting/de
-
frosting
 
operation
 
before
 
it
 
is
 
switched of

f  
automatically
 
by
 
pressing
 
the
 
button again.

 
The
 
indicator
 
lamp
 
associated with

  the   button   goes   off.
F
 
Switch
 
of
f  
the
 
demisting/de
-
frosting
 
of
 
the
 
rear
 
screen
 
and

 
door
 
mirrors
 
as
 
soon
 
as
 
appropriate, as lower current
consumption

 
results
 
in
 
re
-
duced
  fuel   consumption.
With digital dual-zone air
conditioning
Automatic visibility programme
F 
Select
 
this
 
programme
 
to
 
demist
 
or

 
defrost
 
the
 
windscreen
 
and
 
side
 
windows

  as   quickly   as   possible.
The
 
system
 
automatically
 
manages
 
the

 
air
 
conditioning,
 
air
 
flow
 
and
 
air
 
intake,

 
and
 
provides
 
optimum
 
distribu
-
tion
 
towards
 
the
 
windscreen
 
and
 
side
 

windows.
F


To stop  the  programme,  press  either  the "visibility" button again  or  "AUT O",
the  warning  lamp  on  the  button  goes of

f  
and
 
the
 
warning
 
lamp
 
on
 
the "AUT

O"
button comes on.
The system  starts  again  with  the  values  in
 use  before  it  was  overridden  by  the  
visibility

  programme.
With
 
Stop
 
&
 
Start,
 
when
 
dem
-
isting
 
has
 
been
 
activated,
 
the
 
ST

OP
 
mode   is   not   available.
With Stop & Start, when the
demisting,
 
air

 
conditioning

 
and

 
air

 
flow

 
functions

 
are

 
activated,

 
ST

OP
 

mode
 
is
 
not
 
available.
COMFORT

65 
REMOTE CONTROL KEY
System which permits  central  unlocking  or
 locking  of  the  vehicle  using  the  door  
lock

 
or
 
from
 
a
 
distance.
 
It
 
is
 
also
 
used
 
to

 
locate
 
and
 
start
 
the
 
vehicle,
 
as
 
well
 
as

  providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F 
Press
  this   button   to   unfold   the   key.
F
 
Press
 
the
 
open
 
padlock
 
to

 
unlock
 
the
 
vehicle
 
com
-
pletely. F
 
Press
 
the
 
open
 
padlock
 
once

 
to
 
unlock
 
the
 
driver's
 
door

  only.
Selective unlocking using the
remote control
Complete unlocking using
the remote control F
 
Press
 
the
 
open
 
padlock
 
again
 
to
 
un
-
lock   the   other   doors   and   the   boot.
F
Maintain the press on the
open

 
padlock
 
until
 
the
 
de
-
sired  position  is  obtained.  The
 windows  stop  as  soon  as
  you   release   the   button.
Opening the windows using the
remote control
Unlocking using the key
F
 
T
urn  
the
 
key
 
forwards
 
in
 
the
 
driver's
 
door

 
lock
 
to
 
unlock
 
the
 
vehicle
 
com
-
pletely.
Programming the unlocking
The  
complete
 
or
 
selective
 
door
 
unlocking

 
parameter
 
is
 
set
 
via
 
the

 
vehicle
 
configuration
 
menu.The
 
direction
 
indicators
 
flash
 
for
 
a

  few   seconds.
The  
spotlamps
 
in
 
the
 
door
 
mir
-
rors   come   on.
Depending  
on
 
version,
 
the
 
door
 
mirrors

 
unfold,
 
the
 
welcome
 
lighting

 
comes
 
on,
 
the
 
alarm
 
is
 
deactivated.
Selective unlocking of the boot F

Press the central button
on

 
the
 
remote
 
control
 
to
 
unlock

 
the
 
boot.
 
The
 
doors
 
remain

  locked.
The  
complete
 
or
 
selective
 
boot
 
unlocking

 
parameter
 
is
 
set
 
via
 
the

 
vehicle
 
configuration
 
menu.
Programming the unlocking If
 
selective
 
unlocking
 
of
 
the
 
boot
 
is
 
de
-
activated,  
pressing
 
this
 
button
 
also
 
un
-
locks   the   doors.
Don't  forget  to  lock  the  boot  again
 by  pressing  the  closed  padlock
  button.
Selective
 
unlocking
 
of
 
the
 
boot
 
is
 
acti
-
vated
  by   default.
4
ACCESS

68 
Lost keys
Go to a  CITROËN  dealer  with  the  vehicle's  registration  document,  your  personal
  identification   documents   and   if   possible   the   key   code   label.
The
 
CITROËN
 
dealer
 
will
 
be
 
able
 
to
 
look
 
up
 
the
 
key
 
code
 
and
 
the
 
transpon
-
der
  code   required   to   order   a   new   key. Do
 
not
 
throw
 
the
 
remote
 
con
-
trol batteries away, they contain
metals  which  are  harmful  to  the  environment.
T
ake  
them
 
to
 
an
 
approved
 
col
-
lection
  point.
Remote control
The high frequency  remote  control  is  a  sensitive  system;  do  not  operate  it  while
 it  is  in  your  pocket  as  there  is  a  possibility  that  it  may  unlock  the  ve -
hicle,
  without   you   being   aware   of   it.
Do
 
not
 
repeatedly
 
press
 
the
 
buttons
 
of
 
your
 
remote
 
control
 
out
 
of
 
range
 
and
 
out

 
of
 
sight
 
of
 
your
 
vehicle.
 
Y
ou  
run
 
the
 
risk
 
of
 
stopping
 
it
 
from
 
working
 
and
 
the

  remote   control   would   have   to   be   reinitialised.
No
 
remote
 
control
 
can
 
operate
 
when
 
the
 
key
 
is
 
in
 
the
 
ignition
 
switch,
 
even
 
when

  the   ignition   is   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the  doors  locked  may  make  access  to  the  passenger  compart -
ment   by   the   emergency   services   more   difficult   in   an   emergency.
As
 
a
 
safety
 
precaution,
 
never
 
leave
 
children
 
alone
 
in
 
the
 
vehicle,
 
except
 
for
 
a

  very   short   period.
In
 
all
 
cases,
 
it
 
is
 
essential
 
to
 
remove
 
the
 
key
 
from
 
the
 
ignition
 
switch
 
when
 
leaving

  the   vehicle.
Anti-theft protection
Do not make  any  modifications  to  the  electronic  engine  immobiliser  system;  this
  could   cause   malfunctions.
When purchasing a second-hand vehicle
Have the pairing  of  all  of  the  keys  in  your  possession  checked  by  a  CITROËN
 dealer ,  to  ensure  that  only  your  keys  can  be  used  to  open  and  
start

  the   vehicle.
4
ACCESS