Citroen C5 DAG 2009.5 (RD/TD) / 2.G Owners Manual

VI
98
F I T T I N G S
REAR ARMREST
Comfort and storage system for the
rear passengers. Cup-holder
The rear cup-holder
A is located in
the rear central armrest.

 Lower the rear armrest.

 Pull forwards to extract the cup-
holder.
Storage

 Lift up the upper part of the rear
central armrest to access stor-
age space B .
12 V ACCESSORIES SOCKET
SIDE BLINDS

 Pull on the tab A and position the
blind on the hook B .
REAR BLIND (SALOON)

 pull on the tab C to unreel the
blind,

 position the blind on the hooks D .
This is located in the rear ashtray.
Max power: 100 W.
Driver's oddments tray

 Pull the handle towards you.

VI
!
96
F I T T I N G S
SUN VISOR SKI FLAP
A fl ap in the backrest, located to the
rear of the armrest, facilitates the
carrying of long objects.

 With the ignition on, lift the fl ap;
the mirror is illuminated automat-
ically.
To prevent dazzle from ahead, fold
the visor downwards.
It can be disengaged from its central
fi xing and pivoted over to the side
windows if required.
COOLED GLOVE BOX

 To open the glove box, pull on
the handle and lower the lid.
The glove box has a manually clos-
able air conditioning vent B .
It has 2 or 3 sockets C to connect
audio/video equipment.
It has automatic illumination. To open

 Lower the rear armrest.

 Pull the fl ap handle down.

 Lower the fl ap.

 Load the objects from inside the
boot.
Ensure that the objects are well se-
cured and that they do not impede
the operation of the gear lever.
Whilst driving, the
glove
box
should be kept closed.

VI
97
F I T T I N G S
MATS
Removing

 Slide the seat back as far as pos-
sible,

 unclip the fi xings,

 remove the fi xings, then the mat.
Refitting

 Position the mat correctly,

 clip the fi xings,

 check that the mat is held is
place correctly. To avoid any interference with the
pedals:
- only use mats which are suit-
able for the fi xings already
present in the vehicle. The use
of these fi xings is essential,
- never fi t more than 1 mat.
The use of a mat not approved by
CITROËN may obstruct access to
the pedals and hinder the cruise
control/speed limiter function.
Floor mats approved by CITROËN
are fi tted with a 3rd fi xing located in
the pedal area to avoid any risk of
interference with the pedals.
FRONT ARMREST
Comfort and storage system for the
driver and front passenger. Adjustment
To optimise your driving position:

 lift the control A ,

 push the armrest forwards.
The armrest returns to its initial posi-
tion when you push it rearwards.
The front armrest includes a cup
holder and a USB port.
The USB port allows connection of
a portable device, such as a USB
memory stick, sending the audio
fi les to your audio system so that
they can be heard via the vehicle's
speakers.

 Lift the armrest to access the cup
holder or the USB port.
Equipment available for the driver
and front passenger. Cup-holder/USB port

VI
97
F I T T I N G S
MATS
Removing

 Slide the seat back as far as pos-
sible,

 unclip the fi xings,

 remove the fi xings, then the mat.
Refitting

 Position the mat correctly,

 clip the fi xings,

 check that the mat is held is
place correctly. To avoid any interference with the
pedals:
- only use mats which are suit-
able for the fi xings already
present in the vehicle. The use
of these fi xings is essential,
- never fi t more than 1 mat.
The use of a mat not approved by
CITROËN may obstruct access to
the pedals and hinder the cruise
control/speed limiter function.
Floor mats approved by CITROËN
are fi tted with a 3rd fi xing located in
the pedal area to avoid any risk of
interference with the pedals.
FRONT ARMREST
Comfort and storage system for the
driver and front passenger. Adjustment
To optimise your driving position:

 lift the control A ,

 push the armrest forwards.
The armrest returns to its initial posi-
tion when you push it rearwards.
The front armrest includes a cup
holder and a USB port.
The USB port allows connection of
a portable device, such as a USB
memory stick, sending the audio
fi les to your audio system so that
they can be heard via the vehicle's
speakers.

 Lift the armrest to access the cup
holder or the USB port.
Equipment available for the driver
and front passenger. Cup-holder/USB port

VI
98
F I T T I N G S
REAR ARMREST
Comfort and storage system for the
rear passengers. Cup-holder
The rear cup-holder
A is located in
the rear central armrest.

 Lower the rear armrest.

 Pull forwards to extract the cup-
holder.
Storage

 Lift up the upper part of the rear
central armrest to access stor-
age space B .
12 V ACCESSORIES SOCKET
SIDE BLINDS

 Pull on the tab A and position the
blind on the hook B .
REAR BLIND (SALOON)

 pull on the tab C to unreel the
blind,

 position the blind on the hooks D .
This is located in the rear ashtray.
Max power: 100 W.
Driver's oddments tray

 Pull the handle towards you.

VI
98
F I T T I N G S
REAR ARMREST
Comfort and storage system for the
rear passengers. Cup-holder
The rear cup-holder
A is located in
the rear central armrest.

 Lower the rear armrest.

 Pull forwards to extract the cup-
holder.
Storage

 Lift up the upper part of the rear
central armrest to access stor-
age space B .
12 V ACCESSORIES SOCKET
SIDE BLINDS

 Pull on the tab A and position the
blind on the hook B .
REAR BLIND (SALOON)

 pull on the tab C to unreel the
blind,

 position the blind on the hooks D .
This is located in the rear ashtray.
Max power: 100 W.
Driver's oddments tray

 Pull the handle towards you.

VI
99
F I T T I N G S
BOOT FITTINGS (SALOON)

1. Battery location for vehicles with
V6 HDi engine.

2. Boot fl oor (spare wheel storage).
3. Boot lamp.

4. Location for 6 CD changer. Luggage securing rings

 Use the 4 securing rings on the
boot fl oor to secure your lug-
gage.
For safety reasons in the event of
sharp braking, you are advised to
place heavy objects as far forward
in the boot as possible.

VI
100
F I T T I N G S
BOOT FITTINGS (TOURER)

1. Hook
For shopping bags.

2. Torch
To recharge, return it to its stor- age position.

3. Storage net or Battery com-
partment (for vehicles with
3 litre V6 HDi engine).
This provides access to the bat- tery.
1. Luggage-cover blind
(see details on following page)

2. Luggage securing rings
Use the 4 stowing rings provided on the boot fl oor to secure your
loads.
For safety reasons in the event of sharp braking, you are ad-
vised to place heavy objects as
far forwards as possible.

3. Hooks
These allow a cargo net to be fi tted (see details on following
page).
1. Boot lamp

2. 12 V accessories socket
(100 W maximum)
Cigar lighter type 12 volt socket. It is located on the rear right-
hand trim.

3. Loading height control
You can change the height of the vehicle to make loading or un-
loading easier.

4. Hook
For shopping bags.

5. Storage net or closed housing
Location for the 6 CD changer.

VI
101
F I T T I N G S
LUGGAGE COVER (TOURER)
To roll up

 Press the handle (PRESS) gen-
tly. The luggage cover rolls up
automatically.
The moving part A can be folded
along the rear bench seat backrest.
To remove

 Compress the control 1 and lift
the luggage cover on the right
then on the left to remove it. To install

 Position the left-hand end of the
luggage cover roller in its loca-
tion B behind the rear bench
seat.

 Compress the roller control 1
and put the roller in place in its
location C on the right.

 Release the control to secure
the luggage cover.

 Unroll it to its fastening on the
rear pillar. High load retaining net
(Tourer)
Hooked onto the special upper and
lower fi xings, this permits use of the
entire loading volume up to the roof:
- behind the rear seats (row 2),
- behind the front seats (row 1)
when the rear seats are folded.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.

VI
102
F I T T I N G S
Installation

 fold down the backs of the rear
seats,

 position the high load retaining
net roller above the two rails 1
located behind the rear seats
(2/3 bench seat). The two notch-
es 2 must be placed above the
two rails,

 slide the two rails 1 into the
notches 2 and push the roller
(lengthways) from right to left to
secure it,

 reposition the rear seat backs. Row 1 Row 2
To use it in row 1:

 fold down the
backs of the
rear seats,

 open the cov-
ers 3 of the
corresponding
upper fi xings,

 unroll the high load retaining net
and position one of the ends of
the net's metal bar in the cor-
responding fi xing cover. Check
that the hook is secured in the
rail located inside the cover 3 ,

 pull the high load retaining net's
metal bar to position the other
hook in the second fi xing cover. To use it in row 2:

 open the cov-
ers 4 of the
c o r r e s p o n d -
ing upper fi x-
ings,

 from the rear bench seat, unroll
the high load retaining net, push-
ing it to detach it from the retain-
ing hooks,

 position one of the ends of the
net's metal bar in the corre-
sponding fi xing cover. Check
that the hook is secured in the
rail located inside the cover,

 position the other hook in the
second fi xing cover and pull the
metal bar towards you.