DAEWOO MATIZ 2003 Service Repair Manual
Page 991 of 1184
INSTRUMENT/DRIVER INFORMATION 9E–17
DAEWOO M-150 BL2
D109B702
4. Remove the passenger’s airbag module blank cover
from the instrument panel.
Remove the screws.
Remove the passenger’s airbag module blank cov-
er (1).
D109B703
5. Remove the ventilation duct from the instrument pan-
el.
Remove the screws.
Remove the ventilation duct (1).
D109B704
6. Remove the ventilation grilles from the instrument
panel.
Remove the screws.
Remove the ventilation grilles (1).
D109B705
7. Remove the cigar lighter housing from the instrument
panel.
Remove the screws.
Remove the cigar lighter housing (1).
Page 992 of 1184
9E –18 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
D109B706
8. Remove the glove box striker and bracket from the
instrument panel.
Remove the screws (1).
Remove the glove box striker and bracket (2).
D109B707
9. Remove the instrument panel guide from the instru-
ment panel.
Remove the screws (1).
Remove the instrument panel guide (2).
D109B708
10. Remove the defroster grilles and the demister grilles
from the instrument panel.
a. Defroster grille.
b. Demister grille.
D109B521
Installation Procedure
1. Install the defroster grilles and the demister grilles to
the instrument.
2. Install the instrument panel guide to the instrument
panel with the screws.
3. Install the glove box striker and the bracket to the in-
strument panel with the screws.
4. Install the cigar lighter housing to the instrument pan-
el with the screws.
5. Install the ventilation grilles to the instrument panel
with the screws.
6. Install the ventilation duct to the instrument panel with
the screws.
Page 993 of 1184
INSTRUMENT/DRIVER INFORMATION 9E–19
DAEWOO M-150 BL2
D19B710A
7. Install the passenger’s airbag module blank cover to
the instrument panel with the screws.
Tighten
Tighten the screws to 1.5–2 N.m (13–18 lb-in).
a. Passenger’s airbag module blank cover screw
8. Install the instrument cluster brackets to the instru-
ment panel with the screws.
9. Install the instrument panel assembly. Refer to “In-
strument Panel” in this section.
10. Connect the negative battery cable.
D109B711
INSTRUMENT CLUSTER INDICATOR
LAMPS
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument cluster from the instrument
panel. Refer to “Instrument Cluster” in this section.
3. Remove the indicator bulbs from the rear of the clus-
ter.
D109B712
Installation Procedure
1. Install the indicator bulb.
2. Install the instrument cluster to the instrument panel.
Refer to “Instrument Cluster” in this section.
3. Connect the negative battery cable.
D109B713
SPEEDOMETER/ODOMETER/TRIP
ODOMETER
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument cluster from the instrument
panel. Refer to “Instrument Cluster” in this section.
3. Remove the instrument cluster lens and the face
plate.
a. Window plate.
Page 994 of 1184
9E –20 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
D109B714
4. Remove the speedometer/odometer/trip odometer.
Remove the screws on the circuit plate (1).
Remove the speedometer/odometer/trip odometer
(2).
D19B715A
Installation Procedure
1. Install the speedometer/odometer/trip odometer with
the screws.
2. Install the instrument cluster lens and the face plate.
3. Install the instrument cluster. Refer to “Instrument
Cluster” in this section.
4. Connect the negative battery cable.
D109B713
FUEL GAUGE/TEMPERATURE
GAUGE
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the instrument cluster. Refer to “Instrument
Cluster” in this section.
3. Remove the instrument cluster lens and the face
plate.
a. Window plate.
D109B716
4. Remove the fuel gauge/temperature gauge from the
cluster assembly.
Remove the screws on the circuit plate (1).
Remove the fuel gauge (2).
Remove the temperature gauge (3).
Page 995 of 1184
INSTRUMENT/DRIVER INFORMATION 9E–21
DAEWOO M-150 BL2
D19B717A
Installation Procedure
1. Install the fuel gauge/temperature gauge to the clus-
ter assembly with the screws.
2. Install the instrument cluster lens and the face plate.
3. Install the instrument cluster. Refer to “Instrument
Cluster” in this section.
4. Connect the negative battery cable.
Page 996 of 1184
9E –22 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application
Nm
Lb-Ft
Lb-In
Passenger’s Airbag Module Blank Cover Screw
1.5–2
–
13–18
INSTRUMENT CLUSTER INDICATOR LAMPS SPECIFICATIONS
Indicator Lamp Color Bulb
ABS Warning Amber 14 v 1.4 W
Airbag Warning Red 14 v 1.4 W
Battery Charge Indicator Red 14 v 1.4 W
Fasten Seat Belt Warning Red 14 v 1.4 W
High Beam Indicator Blue 14 v 1.4 W
Low Fuel Level Warning Amber 12 v 3 W Oil Pressure Warning Red 14 v 1.4 W Parking Brake Indicator and Brake Fluid Warning Red 14 v 1.4 W Service Engine Soon Warning Amber 14 v 1.4 W
Turn Signal Indicators
Green
14 v 1.4 W
Instrument Cluster IlluminationBlue12 v 3 W
Rear Fog Lamp IndicatorAmber14 v 1.4 W
Page 997 of 1184
INSTRUMENT/DRIVER INFORMATION 9E–23
DAEWOO M-150 BL2
SCHEMATIC AND ROUTING DIAGRAMS
INSTRUMENT CLUSTER (SIRIUS D3)
D19B201B
Page 998 of 1184
9E –24 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
INSTRUMENT CLUSTER (FENIX 5MR)
D19B201S
Page 999 of 1184
INSTRUMENT/DRIVER INFORMATION 9E–25
DAEWOO M-150 BL2
INSTRUMENT PANEL ILLUMINATION
D19B202B
Page 1000 of 1184
9E –26 INSTRUMENT/DRIVER INFORMATION
DAEWOO M-150 BL2
DIGITAL CLOCK
D19B203B