FORD MUSTANG 2003 Workshop Manual

REMOVAL AND INSTALLATION
Pump —
CII
Removal and Installation 1. Disconnect the power steering hose. Remove and discard the seal ring.
2. Disconnect the power steering hose.
3. Remove the pulley. For additional information, refer to Pulley — CII Pump in this section.
4. Remove bolts and the power steering pump (3A674). SECTION 211-
02: Power Steering 2003 Mustang Workshop Manual Special Tool(s)
Teflon Seal Replacer Set
211D027 (D90P-
3517-A) or
equivalent Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

5. To install, reverse the removal procedure.
zUsing the special tool, install a new seal ring.
6. Fill and leak check the power steering system. For additional information, refer to Section 211 -
00 . Klj . 2 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Pump —
CIII
Removal and Installation 1. Remove the pulley. For additional information, refer to Pulley — CIII Pump in this section.
2. Remove the bolt and bracket.
3. Disconnect the power steering hoses. Remove and discard the seal ring. 4. Remove bolts and the power steering pump (3A674). SECTION 211-
02: Power Steering 2003 Mustang Workshop Manual Special Tool(s)
Teflon Seal Replacer Set
211-
D027 (D90P-3517- A) or
equivalent Klj . 1 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

5. To install, reverse the removal procedure.
zUsing the special tool, install a new seal ring.
6. Fill and leak check the power steering system. For additional information, refer to Section 211 -
00 . Klj . 2 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

Klj . 3 ba
32003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Pulley —
CII Pump
Removal 1. Remove the drive belt. For additional information, refer to Section 303 - 05 .
2. Using the special tool, remove the pulley.
Installation 1. Using the special tool, install the pulley.
SECTION 211-
02: Power Steering 2003 Mustang Workshop Manual Special Tool(s)
Pump Pulley Installer
211-
009 (T65P-3A733- C) Pump Pulley Remover
211-
016 (T69L-10300- B) Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

2. Install the drive belt. For additional information, refer to
Section 303 - 05 . Klj . 2 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Pulley —
CIII Pump
Removal 1. Remove the drive belt. For additional information, refer to Section 303 - 05 .
2. Raise and support the vehicle. For additional information, refer to Section 100 - 02 .
3. Using the special tool, remove the pulley. zInspect the pulley for paint marks in the web area near the hub. If there are two paint
marks, discard and install a new pulley. If there is no paint or one paint mark, use a paint
pencil to mark the web area of the pulley near the hub.
Installation 1. Using the special tool, install a new pulley.
SECTION 211-
02: Power Steering 2003 Mustang Workshop Manual Special Tool(s)
Pump Pulley Replacer
211-
185 (T91P-3A733- A) Pump Pulley Remover
211-
016 (T69L-10300- B) Klj . 1 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

2. Install the drive belt. For additional information, refer to
Section 303 - 05 .
3. Lower the vehicle. Klj . 2 ba
22003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...