trunk FORD MUSTANG 2003 Workshop Manual

REMOVAL AND INSTALLATION
Fuel Tank Filler Pipe
Removal
1. Remove the fuel tank. For additional information, refer to Fuel Tank in this section.
2. Remove the bolts from the filler pipe housing.
3. Remove the bolts from the filler pipe rubber boot- to-floor pan.
4. Remove the hose attached to the upper part of the pipe.
5. Rotate the pipe downward to clear the filler pipe pocket and pull it into the trunk area.
Installation
1. To install, reverse the removal procedure.
SECTION 310-
01: Fuel Tank and Lines 2003 Mustang Workshop Manual Klj . 1 ba
12003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_2308/S3B~us~en~ ...

DESCRIPTION AND OPERATION
Speakers
NOTE:
Premium sound speakers (18808) are labeled with either 6 OHMS or 8 OHMS.
z The coupe has a four-speaker system, with two door- mounted speakers and two in the package
tray panel (46506).
z On the convertible, the two rear speakers are located behind the quarter trim panel. (31012)
z The MACH 460 subwoofer system has eight speakers. On the coupe, two are located in each
door and four are in the subwoofer assembly. On the convertible, two speakers are in each door
and two are mounted in each subwoofer assembly behind the rear quarter trim panels. Both the
coupe and convertible subwoofer assemblies are not repairable.
z The MACH 1000 has all the components of the MACH 460 system plus two additional
subwoofers located on each side of the trunk and four additional amplifiers. These subwoofers
can be serviced independently.
SECTION 415-
03: Speakers 2003 Mustang Workshop Manual Klj . 1 ba
12003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

REMOVAL AND INSTALLATION
Child Safety Seat Belt —
Tether Anchor
Removal and Installation
Hard top only 1. Remove the package tray. For additional information, refer to Section 501 - 05 .
2. Remove the bolts and the tether anchor bracket.
Convertible only 3. NOTE: Rework the sheet metal to its original condition and structural integrity.
The convertible model tether anchors are part of the sheet metal. zThese are accessed through the trunk by removing the trunk front trim.
Hard top only 4. NOTE: Rework the sheet metal to its original condition and structural integrity.
To install, reverse the removal procedure.
Hard top and convertible 5. Check the restraint system for correct operation.
SECTION 501-
20A: Safety Belt System 2003 Mustang Workshop Manual Klj . 1 ba
22003 Mustang Workshop Manual
18. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_5108/S3B~us~en~ ...

Fig. 52: A/T Circuit
TRUNK, TAILGATE, FUEL DOOR

2003 Ford Mustang
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:45:09Page 53 © 2006 Mitchell Repair Information Company, LLC.

Fig. 53: Trunk, Tailgate, Fuel Door Circuit
WARNING SYSTEMS

2003 Ford Mustang
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:45:09Page 54 © 2006 Mitchell Repair Information Company, LLC.

Fig. 52: A/T Circuit
TRUNK, TAILGATE, FUEL DOOR

2003 Ford Mustang GT
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:50:34Page 53 © 2006 Mitchell Repair Information Company, LLC.

Fig. 53: Trunk, Tailgate, Fuel Door Circuit
WARNING SYSTEMS

2003 Ford Mustang GT
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:50:34Page 54 © 2006 Mitchell Repair Information Company, LLC.

Fig. 52: A/T Circuit
TRUNK, TAILGATE, FUEL DOOR

2003 Ford Mustang Cobra
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:47:07Page 53 © 2006 Mitchell Repair Information Company, LLC.

Fig. 53: Trunk, Tailgate, Fuel Door Circuit
WARNING SYSTEMS

2003 Ford Mustang Cobra
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:47:07Page 54 © 2006 Mitchell Repair Information Company, LLC.

Fig. 52: A/T Circuit
TRUNK, TAILGATE, FUEL DOOR

2003 Ford Mustang Mach 1
2003 SYSTEM WIRING DIAGRAMS Ford - Mustang
111
18 ноября 2011 г. 12:54:33Page 53 © 2006 Mitchell Repair Information Company, LLC.