HONDA ACCORD SEDAN 2016 Navigation Manual (in English)

70
uu Entering a Destination u Saved
Navigation
Saved
H u u Saved
Select a saved location to use as the destination.
1.Select your destination from the
list.
2.Set the route to your destination.
2Calculating the Route P. 72
Recent
H u u Recent
Select an address from a list of your 50 most recent destinations to use as the
destination. The list is displayed with the most recent destination at the top.
1.Select your destination from the
list.
2.Set the route to your destination.
2Calculating the Route P. 72
1Saved
You can add, edit, or delete the saved place.
2Saved Locations P. 19
Using Voice Command
You can utilize a saved place by using voice
commands.
From the Voice Portal screen, say “Navigation.”
Say “Saved Place” on the voice command screen,
then say a saved place (e.g., “Honda”).
Say “View List” if you want to confirm all saved
places.
Say “Navigate” or “Yes” to set the route.
2Using Voice Commands P. 5
2Voice Control Operation P. 11
1Recent
If you want to delete all recent destinations, press the
(Menu) icon or select and then select Clear.
Using Voice Command
You can utilize a recent destinations by using voice
commands.
From the Voice Portal screen, say “Navigation.”
Say “Recently Found” on the voice command
screen, then say a line number of a screen (e.g.,
”1”).
Say “Navigate” or “Yes” to set the route.
2Using Voice Commands P. 5
2Voice Control Operation P. 11

71
uu Entering a Destination u Map Input
Navigation
Map Input
H u (Back) u View Map
Scroll the map to manually select an icon or a location as the destination.
1.Select any point on the map, a
street, intersection, or category
icon.
uReturn to the current location
when you press the
(Back)
icon.
2.Set the route to your destination.
2Calculating the Route P. 72
1Map Input
“View Map”
2Using Voice Commands P. 5
2Voice Control Operation P. 11
You can customize the map as you like using ,
, , or .
2Map Operation P. 79
If you want to display a specific category of places,
select and then select a category icon.
The place information is displayed when you select
the on the map.
2Viewing the Destination Map P. 74

72
Navigation
Calculating the Route
This section describes how to calculate your route.
Select Go!.
uThe system calculates and displays
the route line on the map screen.
The following options are available:
•Routes: Displays different routes.
2Viewing and Selecting the Routes P. 73
•: Display your destination map.
2Viewing the Destination Map P. 74
1Calculating the Route
If the system has many guidance points on the route
to the destination, it may stop calculation.
In this case, the route guidance will start when you
select OK.

73
uu Calculating the Route u Viewing and Selecting the Routes
Navigation
Viewing and Selecting the Routes
View and select different routes to your destination.
1.Select or to change a route.
uThe travel distance, estimated
travel time, and traffic
information are displayed for
each route.
2.Select Go!.
uThe system calculates and
displays the route line on the
map screen.

74
uu Calculating the Route u Viewing the Destination Map
Navigation
Viewing the Destination Map
1.Select an option.
2.Select Go!.
uThe system calculates and
displays the route line on the
map screen.
The following options are available:
•Route Info: Displays different routes.
2Viewing and Selecting the Routes P. 73
•Set Location: Sets the vehicle position when you are indoors or not receiving
satellite signals.
You can use this feature when GPS Simulator is set to on.
2Navigation P. 35
1Viewing the Destination Map
When you press the (Menu) icon or select ,
you can add to the saved location list.
2Saved Locations P. 19

75Continued
Navigation
Driving to Your Destination
Viewing the Route
This section describes how to follow the route guidance to your destination.
After calculating the route to your
destination, the route is displayed on
the map screen.
2During Route Guidance P. 7
As you drive, the system tracks your
position on the map in real time and
provides guidance as you approach
each guidance point on the route.
The following options are available:
• Select the text bar on the top of the map to display the turn list screen.
2Turn List P. 76
• Select the Next guidance indicator to display the turn information screen or
intersection view screen.
2Turn Information P. 77
• Select to cancel the route guidance and remove your current route.
2Canceling Your Route P. 10
• Select to display the map menu.
2Map Menu P. 80
• Select to display the parking information screen of nearby parking.
■Map Screen
1Viewing the Route
When your phone is connected to Bluetooth®
HandsFreeLink®, the navigation screen will switch to
the incoming call screen when receiving a call.
Speed limit icon
The speed limit shown on the map may be different
from the actual speed limit.
Select the vehicle icon to view the Where Am I?
screen.
2Viewing the Current Location Information
P. 82
You can stop your vehicle en route (e.g., to rest, stop
for gas, etc.), and then continue on your route.
If you did not complete your route, the navigation
restarts when you restart your vehicle.
Next guidance indicator
Speed limit iconDashboards

uu Driving to Your Destination u Viewing the Route
76
Navigation
• Select the map dashboards when you want to change the information that is
displayed. Select the following options:
Arrival Time, Distance, Time to Destination, Via Arrival, Distance to Via,
Time to Via, Direction of Travel, Elevation.
The turn list screen displays turn-by-turn instructions and the distance between
turns.
Select the text bar on the top of the
map.
uSelect a turn to display the
detailed information.
2Turn Information P. 77
uPress the (Menu) icon or select
to display the entire route on
the map.
2Entire Route P. 77
■Turn List
1Viewing the Route
The next guidance indicator does not appear in the
following cases.
•The vehicle speed is 3 mph (4.8 km/h) or less
•The GPS signal is weak•The vehicle position on the map and current vehicle
position do not match
The system displays a roundabout to the next
guidance indicator in the following cases.
•Its diameter is 82 ft (25 m) or more•There is no road inside it
•There is no stop sign
Turn-by-Turn Directions
The next guidance point appears on the upper Audio/
Information Display.
The Turn-by-Turn directions may not be displayed if
the information cannot be received correctly.

Continued77
uu Driving to Your Destination u Viewing the Route
Navigation
The turn information screen displays the turn on the map and the distance and time
remaining before you reach the turn. The lane assist screen may display a view of the
upcoming intersection.
Select the upper-left corner of the
map or select any turn on the turn list
screen.
The entire route screen displays the entire route, destination name, time to
destination, and distance to destination.
1.Select the text bar on the top of
the map.
2.Press the (Menu) icon or select
3.Select Map to display the entire
route screen.
uPress the (Back) icon to
return to the previous screen.
■Turn Information1Viewing the Route
Intersection View Screen
The intersection view screen displays a view of the
upcoming intersection and which lane you should be
driving.
■Entire Route

uu Driving to Your Destination u Viewing the Route
78
Navigation
If you leave the calculated route, the system automatically recalculates a route to the
set destination based on your current location and direction.
If you set the trip log to show, a series of lines (breadcrumbs) are displayed to track
the path you are taking.
2Map Layers P. 33
■Deviating From the Planned Route
■Trip Log Display1Trip Log Display
You can delete the Trip Log.
2Device P. 48
2Reset Factory Default Settings P. 50

79
Navigation
Map Operation
Customize the map, set a destination, and save a place from the map.
1.Select any point on the map.
2.Select an option.
uIf you want to set a destination
or save a location in the map,
scroll the map and select the
desired location.
2Saved Locations P. 19
2Map Input P. 71
The following options are available:
•: Zooms in to the map.
•: Zooms out of the map.
•: Switches the map to 2D or 3D.
•: Rotates the 3D map.
•: Sets the data that appears on the map.
2Map Layers P. 33
1Map Operation
When you select Track Up or North Up, the current
map scale and the (Track Up only) appear on the
map.
The always points North.
2Driving Map View (Map Orientation) P. 29