HYUNDAI I20 2023 Owners Manual

9-42
Maintenance
OTA070039
„ Blade type
NormalBlown
„ Cartridge type
„ Multi fuse
NormalBlown
NormalBlown
A vehicle’s electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one
located in the driver’s side panel bolster,
the other in the engine compartment.
If any of your vehicle’s lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, turn the
engine and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved and we
recommend that all inspect a HYUNDAI
authorised repairer.
i Information
7KUHHNLQGVRIIXVHVDUHXVHGEODGHW\SH
IRUORZHUDPSHUDJHUDWLQJVFDUWULGJH
W\SHDQGPXOWLIXVHIRUKLJKHUDPSHUDJH
UDWLQJV
WARNING
NEVER replace a fuse with anything but
another fuse of the same rating.

[A higher capacity fuse could cause
damage and possibly cause a fire.

[Do not install a wire or aluminium
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
FUSES

9-43
09
Instrument panel fuse
replacement
OBC3N091016AU
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Open the fuse panel cover.
4. Refer to the label on the inside of
the fuse panel cover to locate the
suspected broken fuse location.
OBC3N091018AU
5. Pull the suspected fuse straight out.
Use the removal tool provided in the
engine compartment fuses panel.
6. Check the removed fuse; replace it if
it is blown. Spare fuses are provided in
the instrument panel fuse panels (or in
the engine compartment fuse panel).
7. Push in a new fuse of the same rating,
and make sure it fits tightly in the
clips.If it fits loosely, we recommend
that you consult with a HYUNDAI
authorised repairer.
In an emergency, if you do not have a
spare fuse, use a fuse of the same rating
from a circuit such as the cigarette
lighter fuse.
If the headlights or other electrical
components do not work and the fuses
are undamaged, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced with the
same rating.

9-44
Maintenance
Engine compartment panel fuse
replacement
OBC3N090020
1. Turn the vehicle off.
2. Turn all other switches OFF.
3. Remove the fuse panel cover by
pressing the tab and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the engine
compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly
in the clips. If it does not fit tightly,
we recommend that you consult a
HYUNDAI authorised repairer.
NOTICE
After checking the fuse panel in the
engine compartment, securely
install the fuse panel cover. You may
hear a clicking sound if the cover is
securely latched. If it is not securely
latched, electrical failure may occur
from water contact.
Multi fuse (Main fuse)
OBC3N091019AU
If the multi fuse is blown, it must be
removed as follows:
1. Turn the vehicle off.
2. Disconnect the negative battery cable.
3. Remove the fuse panel cover by
pressing the tab and pulling it up.
4. Remove the nuts shown in the picture
above.
5. Replace the fuse with a new one of
the same rating.
6. Reinstall in the reverse order of
removal.
If the multi fuse is blown, we
recommend that you consult with a
HYUNDAI authorised repairer.

9-45
09
Fuse/relay panel description
Driver’s side fuse panel
OBC3N091017AU
Inside the fuse/relay box covers, you can
find the fuse/relay label describing fuse/
relay names and ratings.
i Information
1RWDOOIXVHSDQHOGHVFULSWLRQVLQWKLV
PDQXDOPD\EHDSSOLFDEOHWR\RXUYHKLFOH
,WLVDFFXUDWHDWWKHWLPHRISULQWLQJ
:KHQ\RXLQVSHFWWKHIXVHER[RQ\RXU
YHKLFOHUHIHUWRWKHIXVHER[ODEHO
OBC3090031

9-46
Maintenance
'ULYHU

9-47
09
'ULYHU

9-48
Maintenance
Engine compartment fuse panel
OBC3N091018AU
Inside the fuse/relay box covers, you can
find the fuse/relay label describing fuse/
relay names and ratings.
i Information
1RWDOOIXVHSDQHOGHVFULSWLRQVLQWKLV
PDQXDOPD\EHDSSOLFDEOHWR\RXUYHKLFOH
,WLVDFFXUDWHDWWKHWLPHRISULQWLQJ
:KHQ\RXLQVSHFWWKHIXVHER[RQ\RXU
YHKLFOHUHIHUWRWKHIXVHER[ODEHO
OBC3090035OBC3090034
„Smartstream G 1.0 T-GDi„Smartstream G1.0 T-GDi (48V) MHEV

9-49
09
OBC3090033OBC3090032
„Smartstream G1.2„Petrol 1.4

9-50
Maintenance
6PDUWVWUHDP*7*'L6PDUWVWUHDP*7*'L+(9
Fuse Name Symbol Relay Name Type
RLY.1 E30Main Relay MINI
RLY.2 E31
Cooling Fan Relay MINI
RLY.3 E32
Wiper (High) Relay MICRO
RLY.4 E33
Wiper (Low) Relay MICRO
RLY.5 E34
Fuel Pump Relay MICRO
RLY.6 E36
Start Relay MICRO
RLY.7 E36
RR WIPER Relay MICRO
RLY.10 E39 A/CON Relay MICRO
RLY.11 E40
Horn Relay MICRO
RLY.12 E41
B/Alarm Horn Relay MICRO
RLY.13 E42
Blower Relay MICRO
RLY.14 E43
PTC Heater Relay MICRO

9-51
09
6PDUWVWUHDP*7*'L6PDUWVWUHDP*7*'L+(9
Fuse Name Symbol (A) Circuit Protected
ALT(180A)
[150A]Alternator, Multi Fuse - F2, Fuse - F31/F32/F33/F34/
F35/F36
MDPS
80A MDPS Unit
DCT1
40ATCM
E-CLUTCH1Electronic Clutch Module
DCT2
40A TCM
ECU1
30A E/R Junction Block (RLY.1)
IG1
30A[With Smart Key] PDM Relay Box (IG1, ACC Relay)
[W/O Smart Key] Ignition Switch
FUEL PUMP
20A E/R Junction Block (RLY.5)
BATTERY
MANAGEMENT1
15A E/R Junction Block (Fuse - F40/F43)
ECU3
15A ECM, Clutch Switch
ECU2
15A ECM
A/CON 1
10A E/R Junction Block (RLY.10)
DCT4
40A Smart Gear Actuator
CVVD
40A CVVD Actuator
IG2
30A[With Smart Key] PDM Relay Box (IG2 Relay)
[W/O Smart Key] Ignition Switch, START MTR RLY
BATT1
50AICU Junction Block (IPS1, IPS3, IPS5, IPS7, IPS8,
IPS11)
BATT3
50AICU Junction Block (Fuse - F8/F15/F21/F25/F29,
Long Term Load Latch Relay-F16/F9/F22)
DCT3
15A TCM
E-CLUTCH2Electronic Clutch Module
HORN
15A E/R Junction Block (RLY.11, RLY.12)
AMS
10A Battery Sensor
BATT2
50A ICU Junction Block (IPS2, IPS4, IPS6, IPS9, IPS10)
BATT4
50AICU Junction Block (Power Window Relay-F5/F12,
Fuse - F3/F4/F10/F11)
C/FAN
60A E/R Junction Block (RLY.2)