HYUNDAI PALISADE 2023 Owners Manual

Convenience Features5-112
Recirculating air when washer
fluidis used
When washer fluid is used, in order
to reduce any objectionable scent
of the washer fluid from entering
the cabin,recirculation mode and air
conditioningare automatically activated
dependingon the outside temperature.

[ When the air intake control button
ispressed while fresh mode is
selected,air intake control will switch
torecirculation mode.

[ When windshield lever is used
whilerecirculation mode is selected,
airintake control will switch to
freshmode

[ The function may not work in
someconditions such as cold weather
orengine off.
For more details, refer to “ClimateControl
Additional Features” section inthis
chapter.
WARNING
When the outside temperature is below
freezing, ALWAYS warm the windshield
using the defroster to help prevent
the washer fluid from freezing on the
windshield and obscuring your vision
which could result in an accident and
serious injury or death.
NOTICE

[ To prevent possible damage to the
washer pump, do not operate the
washer when the fluid reservoir is
empty.

[ To prevent possible damage to the
wipers or windshield, do not operate
the wipers when the windshield is
dry.

[ To prevent damage to the wiper
arms and other components, do
not attempt to move the wipers
manually.

[ To prevent possible damage to the
wipers and washer system, use anti-
freezing washer fluids in the winter
season or cold weather.

05
5-113
Rear Window Wiper and Washer
B0200KO03
The rear window wiper and washer
switch is located at the end of the wiper
and washer switch lever. Turn the switch
to the desired position to operate the
rear wiper and washer.
HI: High wiper speed
LO: Low wiper speed
OFF: Off
B0201KO02
Push the lever away from you to spray
rear washer fluid and to run the rear
wipers 1~3 cycles. The spray and wiper
operation will continue until you release
the lever.
Auto rear wiper
The rear wiper will operate while the
vehicle is in reverse with the front wiper
ON by selecting the function from the
Settings menu in the infotainment
system screen. Select:
- 6HWXS

Convenience Features5-114
0$18$/&/,0$7(&21752/6<67(0

05
5-115
Heating and Air Conditioning
1. Start the engine.
2. Set the mode to the desired position.To improve the effectiveness of
heating and cooling, select the mode
according to the following:

- Heating:

- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh mode or Recirculation mode position.
5. Set the fan speed control to the desired speed. 6. If air conditioning is desired, turn the
air conditioning system on.
When starting the vehicle in cold
weather a more efficient way to heat
the passenger compartment is to do the
following.

- Turn off or lower the blower, right
after starting the engine.

- Engine temperature is still low and the
air flow from the heater is still cold.

- After a few minutes of engine warm
up, turn on or set the fan to a higher
level and adjust the temperature
setting to hot.
Mode selection
A0204KO02
The mode selection button controls the direction of the air flow through the ventilation
system. Air can be directed to the floor, dashboard outlets, or windshield. Five symbols
are used to represent Face, Bi-Level, Floor, Floor-Defrost and Defrost air position.

Convenience Features5-116
B9024EU01
Face-Level ( B, D)
Air flow is directed toward the upper
body and f
ace. Additionally, each outlet
can be controlled to direct the air
discharged from the outlet.
Bi-Level ( B, D)
Air flow is directed towards the face and
the floor
.
Floor-Level ( A,
C, D,
E)
Most of the air flow is directed to the
floor
, with a small amount of the air
being directed to the windshield and side
window defrosters.
Floor & Defrost ( A,
C, D,
E)
Most of the air flow is directed to the
floor and the windshield with a small
amount dir
ected to the side window
defrosters.
B9024EU08
Defrost-Level ( A,
D)
Most of the air flow is directed to
the
windshield with a small amount of air
directed to the side window defrosters.
B9024EU02
MAX A/C-Level ( B, D)
The MAX A/C mode is used to cool the
inside o
f the vehicle faster. Air flow is
directed toward the upper body and
face.
In this mode, the A/C button and the
Recirculation mode button will be
automatically selected. Turn the fan
speed mode to adjust.
After the interior cabin has cooled
sufficiently, move the temperature knob
away from the MAX A/C setting and
adjust the knob to the desired position.
If you wish to continue using A/C ON,
make sure the A/C button indicator is
illuminated.

05
5-117
Instrument panel vents
B0204KO04
The instrument panel vent air flow can be
directed up/down or left/right using the
vent adjustment lever.
The outlet vents can be opened or closed
separately using the vent control lever.
If you move the vent control lever away
from the passenger, the outlet vents can
be closed.
Temperature control
B9024EU03
The temperature will increase by turning
the knob to the right.
The temperature will decrease by turning
the knob tao the left.
Air intake control
B9024EU09
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).

Convenience Features5-118
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment will
be recirculated through the
system and heated or cooled
according to the function
selected.
Fresh mode
When Fresh mode is selected,
air enters the vehicle from
outside and is heated or
cooled according to the
function selected.
Information
Operating the system primarily in Fresh
mode is recommended. Use Recirculation
mode temporarily only when needed.
Prolonged operation of the heater in
Recirculation mode and without the A/C
ON can cause fogging of the windshield.
In addition, prolonged use of the A/C
ON in Recirculation mode may result in
excessively dry, dehumidified air in the
cabin and may promote formation of
musty vent odor due to stagnant air.
WARNING

[ Continued use of the climate control
system operation in Recirculation
mode for a prolonged period of
time may cause drowsiness to the
occupants in the cabin. This may lead
to loss of vehicle control which may
lead to an accident.

[ Continued use of the climate control
system operation in Recirculation
PRGHZLWKWKH$&2))PD\DOORZ
humidity to increase inside the
cabin. This may cause condensation
to accumulate on the windshield and
obscure visibility.

[ Do not sleep in your vehicle or
remain parked in your vehicle with
the windows up and either the
heater or the air conditioning ON for
prolonged periods of time. Doing so
may increase the levels of carbon
dioxide in the cabin which may lead
to serious injury or death.

05
5-119
Fan speed control
B9024EU04
Turn the knob to the right to increase
the fan speed and airflow. Turn the knob
to the left to decrease fan speed and
airflow.
Setting the fan speed control knob to the
“0” position turns off the fan.
NOTICE
Operating the fan speed when the
ignition switch is in the ON position
could cause the battery to discharge.
Operate the fan speed when the engine
is running.
Air conditioning
B9024EU05
Press the A/C button to turn the system
on (indicator light will illuminate) and off.
Rear climate control button
B9024EU06
If you press the rear climate control
button, rear passengers can control the
rear climate system.
B9024EU07
Press the rear fan speed control button
to increase or decrease the fan speed
and air flow.

Convenience Features5-120
Rear climate control
„2nd row air conditioning control
A0923EU01/A0923EU01/A0923EU03
M OFF button
N Mode selection button O Temperature control button
P Fan speed control button
If you press the rear climate control button of the front climate control system, rear
passengers can control the rear climate system by using the rear climate control
system.

05
5-121
Fan speed control
B9024EU06
1. Press the rear climate control button of the front climate control system.
B9025EU01
2. The fan speed can be set to the desired speed by pushing the fan
speed control button. The higher the
fan speed is, the more air is delivered.
Pressing the OFF button turns off the
fan.
Temperature control
1. Press the rear climate control button of the front climate control system.
B9025EU02
2. The temperature of delivered aircan be set to the desired temperature
by pushing the temperaturecontrol
button. Pressing the off button turns
offthe fan.