display INFINITI Q50 2014 Infiniti Intouch

INFO:
.
Only one of these route condition can be
utilized at a time.
.The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive on for
safety reasons.
.If route conditions are set from [Search
Criteria], all sections in the route are subject
to the same route conditions even though
different route conditions have been set for
different sections in [Edit Route].
.If [Use Time Restricted Roads] is deacti-
vated, the system calculates a route without
any consideration of the regulations con-
cerning the time or day of the week.
Therefore, the suggested route may include
a road subject to traffic regulations con-
cerning the time or day of the week. When
driving along the route, always follow all
traffic regulations regardless of whether
[Use Time Restricted Roads] is set to be
considered or not.
.If the system cannot calculate any alter-
native routes, the previous route is dis-
played.
.If the vehicle greatly deviates from the
suggested route, the system calculates a
new route.
.Traffic jam information displayed on the
map screen is not statistical traffic informa-
tion.
.Even when [Use Real Time Traffic Info] is
turned on, if traffic information has not been
provided for the area, a detour may not
always be indicated in a location where a
traffic jam occurs.
.The system may not lead to a detour if traffic
closure or a traffic jam occurs far from the
present location.
.The system calculates to reduce the time
required for the entire route from the start to
the destination. If there are no appropriate
routes, the system may lead to a route
where a traffic jam occurs instead of leading
to a detour.
VIEWING TRAFFIC INFORMATION
SiriusXM Traffic information is a subscrip-
tion service offered by SiriusXM Satellite
Radio.
This service provides real-time information
regarding traffic flow, accidents, road
construction and other incidents, where
available.
SiriusXM Traffic combines information from
commercial and public traffic data provi-
ders including government departments of
transportation, police, emergency services,
road sensors, cameras and aircraft reports.
The traffic information is broadcast to the
vehicle by the SiriusXM satellites. Traffic
information available for the route the
driver selected is shown on the navigation
screen so traffic conditions between you
and the destination are known. Three types
of real-time traffic information for major
roadways are shown on the navigation
system: . Unscheduled traffic data for example,
accidents and disabled vehicles.
. Scheduled traffic data, for example
road construction and road closures.
9. Navigation (if so equipped)
9-43

data).
WARNING!
NavTraffic information is not a substitute for
attentive driving. Traffic conditions change
constantly and emergency situations can
arise without warning. Relying only on
NavTraffic information may lead to a collision
and could result in serious personal injury.
NOTE:
Flow information is provided only for roads
equipped with traffic sensors and is not
available in all markets covered by the service.
Flow data may not be available on portions of a
road that is under construction.
“SiriusXM Travel Link®”(page 8-4)
1. Push <MENU>and touch [Information].
2. Touch [Traffic Info.].
3. Touch the preferred information.
Avail-
able
item Action
[Nearby
Traffic
Info] The list of available traffic information
around the current vehicle location is
displayed.
[Route
Info] This is only available when a route is
set. The list of traffic information found
on the recommended route from the
current vehicle location to the desti-
nation is displayed. The detailed
information about displayed events
can also be checked.
VIEWING TRAFFIC INFORMATION
LIST
Upper display
Lower display
The list of traffic information found on the
recommended route from the current ve-
hicle location to the destination is dis-
played. The detailed information about
displayed events can also be checked.
1. Touch the preferred information from
Traffic info screen.
2. Touch the event to check the detailed information. Touch [Map] to display
traffic information location on the
upper screen.
3. The map screen centered around the selected event is displayed on the
upper display. On the lower display,
the detailed information about the
event is displayed.
The message can be scrolled.
4. Touch [
] to return to the previous
screen.
9. Navigation (if so equipped)
9-45

9. Navigation (if so equipped)
9-46
DISPLAY URGENT TRAFFIC INFOR-
MATION
When an urgent event is found around the
current vehicle location, a message pops
up automatically on the upper display with
a voice announcement.
The message includes the icon, event type,
event information and the direct distance
from the current location to the event.
INFO:
.
Urgent traffic information is displayed re-
gardless of whether the traffic information
system is on or off.
.When there are multiple urgent events, the
event with the shortest direct distance from
the current location is displayed.
.If the urgent event is on the recommended
route, and if a detour is found, the detour
route notification screen is displayed when
the vehicle approaches the detour point.
TRAFFIC INFORMATION SETTINGS
This displays or changes the settings for
the traffic information related functions.
1. Push <MENU>.
2. Touch [Settings] and touch [Navigation].
3. Touch [Traffic Info Settings].
4. Touch the preferred setting. The indi- cator for the selected setting illumi-
nates.
Available setting items . [Use Traffic Info]:
Enables all traffic information related
functions.
. [Show Incidents on Map]:
Displays the traffic incidents (e.g.,
accident) on the map screen.
. [Show Traffic Info]:
Displays the traffic flow with an arrow on the map screen.
. [Traffic Announcements]:
Announces the traffic information event
on the route.
INFO:
.
Even when [Show Traffic Info] and [Show
Incidents on Map] are set to off, the list
display of [Route Info] and [Nearby Traffic
Info] will not be affected.
.Even when [Traffic Announcement] is set to
off, the route guidance will not be affected.
Also, the announcement of emergency
information and weather information will
not be turned off.
Voice command
1. Push <TALK
>located on the steer-
ing-wheel.
2. After the tone sounds, speak a com- mand.
To turn the traffic information system
on or off:
“Traffic Information”

TRAFFIC INFORMATION ON MAP
With a subscription to SiriusXM Traffic
service, traffic information is displayed on
both 2D map and Birdview
TMmap screen.“Notes on SiriusXM Traffic informa-
tion”(page 8-9)
Screen information
*1Traffic indicator:
Displays the reception condition of traffic
information transmitted from the provider.
When reception condition of traffic
information transmitted from the provider
is not detected, the traffic indicator will be
“grayed-out”.
*2Estimated travel time to destination cal-
culated with consideration of traffic in-
formation on route.
*3Road conditions
Free Flow: Green arrow
Moderate traffic: Yellow arrow
Heavy traffic: Red arrow
Section affected by serious traffic event:
Purple arrow
*4Traffic information icon:
If a route is not already set, all of the
traffic information icons on the map
screen are displayed in color. When a
route is already set, the icons on the route
are displayed in color, and the icons
outside the route are displayed in gray.
: Accident
: Closed road
: Information
: Road work
: Slippery road
: Weather
: Incident
Traffic information display and scale levels
2D map and Birdview Map
5 miles 10 km
2 miles 4 km
1 mile 2 km 1/2 mile
1 km
1/4 mile 400 m
1/8 mile 200 m
1/16 mile 100 m
1/32 mile 50 m
1/64 mile 25 m
9. Navigation (if so equipped)
9-47

9. Navigation (if so equipped)
9-48
STORING A LOCATION/ROUTE
STORING LOCATION
Often visited locations can be stored in the
Stored Locations. The stored addresses
can be easily retrieved to set them as a
destination or waypoint. The Stored Loca-
tions can store up to 200 locations.
Storing home location
Upper display
1. Push<MENU>and touch [Destination].
2. Touch [Home].
3. If the home location is not registered, the system asks to store it.
4. Set the Home location using the same procedure as setting a destination.
“Setting destination” (page 9-14)5. A message is displayed on the lower
display and the home location is
stored.
Other Settings
1. Push the <MENU>and touch [Settings].
2. Touch [Navigation] and touch [Edit/ Delete Stored Locations].
3. Touch [Stored Locations] and touch [Home Location (None)].
4. Touch the appropriate method to set a location. The search methods are the
same as for setting a destination.
“Setting destination” (page 9-14)
5. When the stored location is displayed at the center of the map on the upper
display.
6. Adjust the location of the stored item and edit the contents of the stored item
as necessary. After finishing the
setting, touch [
].
Storing location by searching
It is possible to store a location by
searching in various ways.
1. Push the <MENU>and touch [Settings].
2. Touch [Navigation].
3. Touch [Edit/Delete Stored Locations].
4. Touch [Stored Locations].
5. Touch [Add New].
6. Touch the appropriate method to set a location. The search methods are the
same as for setting a destination.
“Setting destination” (page 9-14)
7. A message is displayed, and the address of the location is stored in
the Stored Locations.
8. Adjust the location of the stored item and edit the contents of the stored item
as necessary.
“Editing stored home and loca-
tion” (page 9-51)

9. After finishing the setting, touch [].
INFO:
.
When the location is stored in the Stored
Locations, [Stored Locations] can be used to
search for the location.
.When 200 store locations are already
stored, a new store location cannot be
stored until a currently stored store location
is deleted.
Storing location by moving map
1. Move to the preferred location on the map and touch [] on the upper
display.
Upper display
2. Touch [Store Location]. A message is displayed. Select [Yes] to store the
address of the location. 3. The icon representing the stored loca-
tion is displayed on the map. Touch
[
] on the upper display to return to
the current location map screen.
INFO:
The address is stored in the first available
position number in the Store Location list.
STORING ROUTE
A maximum of five calculated routes can be
stored. Stored routes can be easily re-
trieved and set as the suggested route.
If any waypoints are not set on the route,
the route cannot be stored.
1. Push <MENU>and touch [Route] and
touch [Edit Route].
2. Touch [Store Route]. A confirmation message is displayed. Select [Yes] to
store the current route. Other settings
A route can also be stored using the
following procedure.
1. Push
<MENU>and touch [Settings].
2. Touch [Navigation] and touch [Edit/ Delete Stored Locations].
3. Touch [Stored Route Plans].
4. Touch [Store Current Route]. A confir- mation message is displayed.
5. Confirm the contents of the message then touch [Yes]. The current route is
stored.
INFO:
.
A stored route includes only locations
(destination and waypoints) and route
calculation conditions, not the route itself.
.The route is stored in the first available
position number in the store current route
list.
.When five routes are already stored in the
address book, a new route cannot be stored
until a route is deleted.
“Deleting stored item” (page 9-53)
9. Navigation (if so equipped)
9-49

Editing stored home and location
Step 1Step 2Step 3 Step 4 Action
1.Push<MENU>
2.Touch [Settings]
3.Touch [Navigation]
4.Touch [Edit/Delete
Stored Locations]
5.Touch [Stored Loca-
tions]
[Add New]“Storing location by searching” (page 9-48)
[Home Location] [Edit] [Move Location] Adjust the location of the stored location on the upper display.
[Phone No.] Stores the telephone number of the home location.
[Icon] Changes the icon of the home to the preferred one.
[Show Icon on Map] Displays the home icon on the map.
[Alarm Sounds] Sets the tone of the alarm that sounds when the vehicle approaches the home.
[Alarm Direction] Sets the alarm to sound when approaching from a specific direction.
[Alarm Distance] Sets the alarm to sound when reaching a specific distance to the home.
[Delete] Delete the stored home location.
9. Navigation (if so equipped)
9-51

9. Navigation (if so equipped)
9-52
Step 1Step 2Step 3 Step 4 Action
1.Push<MENU>
2.Touch [Settings]
3.Touch [Navigation]
4.Touch [Edit/Delete
Stored Locations]
5.Touch [Stored Loca-
tions]
Touch the preferred
stored address from the
list. [Edit] [Move Location]
Adjust the location of the stored location on the upper
display.
[Name] Changes the name of a stored location.
[Phone No.] Stores the telephone number of a stored location.
[Icon] Changes the icon of a stored location to the preferred one.
[Show Icon on Map] Displays the home icon on the map.
[Group] Groups the stored locations.
[Alarm Sounds] Sets the tone of the alarm that sounds when the vehicle
approaches a stored locaiton.
[Alarm Direction] Sets the alarm to sound when approaching from a specific
location.
[Alarm Distance] Sets the alarm to sound when reaching a specific distance
to a stored location.
[Delete] Delete the stored location.
INFO:
.
By changing the icons, the usage of the [By Icon] option of the sort function can be optimized more effectively.
.By grouping the stored addresses, the [By Group] option of the sort function can be used more effectively in the [Sort] mode.
.After the direction is set and [Alarm Direction] is selected and set again, a confirmation message is displayed. Confirm the contents of the message
then touch [Yes]. The set direction is overwritten.
.Once the direction and the distance to sound an alarm are set, the system will sound the alarm when the vehicle enters the triggering zone.

Editing avoid area
Step 1Step 2 Step 3 Action
1.Push<MENU>
2.Touch [Settings] and touch
[Navigation]
3.Touch [Edit/Delete Stored
Locations]
4.Touch [Avoid Areas]
5.Touch the preferred Avoid
Area from the list
[Edit] [Move Location] Display the Avoid Area on the upper screen, and adjusts the location of the Avoid Area.
[Rename] Changes the name of an Avoid Area.
[Resize Area] Adjusts the range of the Avoid Area.
[Minimize Toll Roads] Sets the route to include or not include freeways.
[Delete] Delete an Avoid Area.
INFO:
.
The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include a freeway.
.If the current vehicle location is set to an
Avoid Area, the system will not provide
route guidance.
Editing stored route
1. Push <MENU>and touch [Settings].
2. Touch [Navigation] and touch [Edit/ Delete Stored Locations].
3. Touch [Stored Route Plan]. 4. Touch the preferred stored route from
the list.
Available setting items . [Rename]:
Changes the stored route name.
. [Delete]:
Delete the stored route.
DELETING STORED ITEM
The locations and routes in the Address
Book can be deleted. Two deletion meth-
ods are available: deleting an individual
item and deleting all stored items.
INFO:
.
Deleted items cannot be restored. Before
deleting an item, always make sure that the
item is no longer needed.
9. Navigation (if so equipped)
9-53

Deleting individual item on map
This operation is performed on the upper
display.
1. Align the cross pointer over the pre-ferred stored location for deletion by
moving on the map, and then touch
[
].
2. Touch [Delete]. A confirmation messageis displayed.
3. Touch [Yes]. The stored location is deleted from the Stored Location.
4. Touch [
] to return to the previous
screen.
TRANSFERRING INFORMATION TO/
FROM ADDRESS BOOK
The information of the stored home and
addresses can be exported and imported
using a USB memory device.
INFO:
A USB memory device can be used to transfer
data but it is not possible to edit the data using
a personal computer, etc.
Two USB ports are located in the center console
box.
“Media Hub” (page 2-6).
1. Insert a USB memory device and push
the <MENU> button and touch [Set-
tings].
2. Touch [Navigation] and touch [Edit/ Delete Stored Locations]. 3. Touch [Transfer Address Book].
4. Touch [Transfer Address Book to USB]
or [Transfer Address Book from USB].
5. Touch [All], [Home Location] or [Stored Locations].
NOTE:
Do not remove the USB memory until the
system completely imports or exports the data.
INFO:
.
If the USB memory already has the data for
a stored address, a confirmation message is
displayed. Once overwritten, the original
data cannot be recovered.
9. Navigation (if so equipped)
9-55