door panel JAGUAR X308 1998 2.G Workshop Manual

                    Ambient Air Temperature  Sensor  (82.20. 02) 
                     Cold Ai
r
 Bypass  Blend  Door  Actuator  (82.20.86)  
                     Defrost Vent/Register  Blend  Door  Actuator  (82.20.84)  
                     Footwell Vent/Duct  Blend  Door Actuator  (80.20.20  or  82.20.85)  
                     Instrument  Panel  Blend Door  Actuator  (82.20.83)  
                     Remote Climate Control  Module  LHD (82.20.65)  
                     Remote Climate Control  Module  RHD (82.20.65)  
 
        413:  Instrumentation  and Warning  Sy
stems  
 
             413‐00:  Instrument  Cluster  and  Panel  Illumination  
                 Description  and  Operation  
                     Instrument  Cluster  and Panel  Illumination  
                 Removal and  Installation  
                     Instrument  Panel  Dimmer  Switch  (86.65.07)  
 
             413‐01:  Instrument  Cluster  
                 Description  and  Operation  
                     Instrument  Cluster  
                 Diagnosis  and  Testing  
                     Instrument  Cluster  
                 Removal and  Installation  
                     Instrument  Clust
er (88.20.01)  
 
             413‐06:  Horn  
                 Description  and  Operation  
                     Horn 
                 Diagnosis  and  Testing  
                     Horn 
 
             413‐07:  Clock  
                 Description  and  Operation  
                     Clock 
                 Diagnosis  and  Testing  
                     Clock 
                 Removal and  Installation  
                     Clock (88.15.07)  

                                                                                    
 
         419:
 Electronic  Featu r
e
 Group  
 
             419
‐10:  
Multifunction  Electronic  Modules  
                 Removal
 and  Installation  
                     Driver
 Seat  Module  (DSM)  (86.75.28)  
 
    5:  Body  and  Paint  
 
        501:  Body  and Paint  
 
             501‐00:  Body  System  ‐ Gen
eral Information 
                 Specification  
                 Description  and  Operation  
                     Body 
 
             501‐02:  Front  End Body  Panels  
                 Description  and  Operation  
                     Front End  Body  Panels  
                 Removal and  Installation  
                     Cowl Panel  Grille  (76.10.01)  (76.43.39)  
                     Driver Side  Bulkhead  Cover  (76.11.34)  
                     Passenger Side  Bulkhead  Cover  (76.11.33)  
                     Radiator Grille Opening  Panel  (76.10.06)  
                     Radiator Grille Ope
ning  Panel  Reinforcement  (76.11.24)  
                     Radiator Splash Shield  (76.22.90)  
 
             501‐03:  Body  Closures  
                 Description  and  Operation  
                     Body Closures  
                 General Procedures  
                     Hood Alignment  (76.16.02)  
Diagnosi
s
 and  Testing  
(FDM)
Front
 Door  Module
 
(86.80.34)
Rear  
(RDM)
Door
 Module
 

                Removal and  Installation  
                     Door (76. 28.04)  
                     Front Doo
r 
Opening  Weatherstrip  (76.40.01)  
                     Fuel Filler  Door  (76.10.25)  
                     Hood (76.16.01)  
                     Hood Hinge  (76.16.12)  
                     Hood Striker  (76.16.24)  
                     Hood Strut  (76.16.15)  
                     Luggage Compartment  Lid Hinge  (76.19.28)  
                     Luggage Compartment  Lid Opening  Weatherstrip  (76.19.06)  
                     Luggage Compartment  Lid Striker  (76.19.12)  
                     Luggage Compartment  Lid Strut  (76.19.27)  
                     Rear Door  Opening  Weathe
rstrip (76.40.02)  
 
             501‐05:  Interior  Trim  and  Ornamentation  
                 Description  and  Operation  
                     Interior Trim  
                 Removal and  Installation  
                     A‐Pillar  Trim Panel  (76.13.31)  
                     B‐Pillar  Trim Panel  (76.13.28)  
                     Cowl Side  Trim  Panel  (76.13.30)  
                     C‐Pillar  Trim  Panel  (76.13.73)  
                     Door Window  Control Switch  Finish Pane
l (76.47.33)  
                     Engine Cover  (76.11.35)  
                     Floor Covering  (76.49.08)  
                     Folding Tray  (76.47.31)  
                     Folding Tray  Finish  Panel  (76.47.32)  
                     Front Door  Armrest  (76.34.22)  
                     Front Door  Trim Panel  Finish Panel  (76.47.11)  
                     Front Door  Stowage  Compartment  (76.34.27) 
                     Front Door  Trim Panel  (76.34.01)  
                     Headliner (76.64.01)  
                     Luggage Compartment  Front Trim Panel  (76.19.31)  
                     Luggage Compart
ment Lid Trim  Panel  (76.19.05)  
                     Luggage Compartment  Rear Trim  Panel  (76.19.44)  
                     Luggage Compartment  Side Trim  Panel  (76.19.22)  
                     Overhead Console  Finish  Panel  (76.47.41)  

                    Parcel Shelf  (76.67. 06) 
                     Parcel Shelf
 
Support  (76.67.09)  
                     Passenger Assist  Handle  (76.58.30)  
                     Rear Door  Armrest  (76.34.23)  
                     Rear Door  Trim  Panel  Finish Panel  (76.47.12)  
                     Rear Door  Trim  Panel  (76.34.04)  
                     Rear Window  Blind  (76.14.04)  
                     Rear Door  Window  Control  Switch  Finish  Panel  (76.47.34)  
                     Scuff Plate Trim  Panel  (76.13.81)  
                     Sun Visor  (76.10.48)  
 
             501‐08:  Exterior  Trim  and  Or
namentation  
                 Description  and  Operation  
                     Exterior Trim  
                 Removal and  Installation  
                     A‐Pillar  Moulding  LH  (76.13.19)  
                     A‐Pillar  Moulding  RH  (76.13.20)  
                     Coachlines 
                     Door Moulding  (76.43.72)  
                     Front Fender  Moulding  (76.10.48)  (76.43.73)  
                     Luggage Compartment  Lid Badges  (76.44.03)  
                     Luggage Compartment  Lid Moulding  (76.43.79)  
                     Radiator Grille (76.
55.03)  
                     Radiator Grille Bezel  (76.55.15)  
 
             501‐09:  Rear  View  Mirrors 
                 Description  and  Operation  
                     Rear View  Mirrors  
                 Removal and  Installation  
                     Auto‐Dimming  Interior  Mirror  (76.10.56)  
                     Exterior Mirror  (76.10.52)  
                     Exterior Mirror  Cover  (76.10.55)  
                     Exterior Mirror  Glass  (76.10.53)  
                     Exterior Mirror  Motor  (76.10.57)  (76.11.09)  
                     Interior Mirror  (76.10.51)  
                     Interior Mirro
r Mounting  Block  (76.10.62)  
 

            501‐10:  Seating 
                 Specificatio
n
 
                 Description  and  Operation  
                     Seats 
                 Removal and  Installation  
                     Front Seat  (76.70.01)  
                     Front Seat  Backrest  (76.70.06)  
                     Front Seat  Backrest  Cover  (76.70.15)  
                     Front Seat  Backrest  Heater  Mat  (86.75.14)  
                     Front Seat  Backrest  Trim  Panel  (76.70.03)  
                     Front Seat  Cushion  (76.70.11)  
                     Front Seat  Cushion  Cover  (76.70.33)  
                     Front Sea
t Cushion  Heater  Mat  (86.75.13)  
                     Front Seat  Head  Restraint  (76.70.14)  
                     Front Seat  Head  Restraint  Motor  (86.75.17)  
                     Front Seat  Recliner  Motor  (86.75.04)  
                     Front Seat  Track  (76.70.20)  
                     Front Seat  Track  Motor  (86.75.33)  
                     Lumbar Motor  (86.75.12)  
                     Rear Seat  Armrest  (76.70.39)  
                     Rear Seat  Backrest  (76.70.38)  
                     Rear Seat  Backrest  Cover  (76.70.48)  (78.90.12)  
                     Rear Seat  Backrest  Heater  Mat  (86.75.35)  
                     Rear Seat  Cushio
n (76.70.37)  
                     Rear Seat  Cushion  Cover  (76.70.47)  
                     Rear Seat  Cushion  Heater  Mat  (86.75.37)  
                     Rear Seat  Head  Restraint  (76.70.56)  
                     Rear Seat  Track  
                     Seat Control  Switch  (86.75.23)  
 
             501‐11:  Glass,  Frames  and  Mechanisms  
                 Description  and  Operation  
                     Glass, Fra
mes  and  Mechanisms  
                 Removal and  Installation  
                     Door Window  Control Switch  Bulb  (86.46.12)  
                     Front Door  Window  Glass  (76.31.01)  
                     Front Door  Window  Glass  Weatherstrip  (76.40.28)  

                    Front Doo r
 
Window  Regulator  and  Motor  (76.31.45)  
                     Front Door  Window  Regulator  Motor  (76.31.45)  
                     Front Door  Window  Control  Switch  (86.25.07)  
                     Rear Door  Window  Glass  (76.31.02)  
                     Rear Door  Window  Glass  Weatherstrip  (76.40.29)  
                     Rear Door  Window  Regulator  and  Motor  (86.25.09)  
                     Rear Door  Window  Regulator  Motor  (86.25.09)  
                     Rear Door  Window  Control  Swi
tch (86.25.10)  
                     Rear Quarter  Window  Glass  (76.31.31)  
                     Rear Window  Glass  (76.81.11)  
                     Windshield  Glass  (76.81.40)  
 
             501‐12:  Instrument  Panel  and  Console  
                 Specification  
                 Description  and  Operation  
                     Instrument  Panel  and Instrument  Panel  Console  
                 Removal and  Installation  
                     Audio Unit  Housing  (76.25.15)  
                     Climate Control Assembly  Housing 
                     Coin Stowage  Compartment (76.46.37)  
                     Floor Co
nsole  (76.25.01)  
                     Floor Console  Ashtray  (76.25.25)  
                     Floor Console  Extension  (76.25.05)  
                     Floor Console  Finish  Panel  (76.47.26)  
                     Floor Console  Finish  Panel  Bracket  (76.25.26)  
                     Floor Console  Stowage  Compartment  (76.25.16) 
                     Floor Console  Stowage  Compartment  Lid (76.25.18)  
                     Glove Compartment  (76.52.03) 
                     Glove Compartment  Lid (76.52.02)  
                     Glove Compartment  Lid Damper  (76.52.22)  
                     Glove Co
mpartment  Liner  (76.52.21)  
                     Instrument  Cluster  Finish Panel  (76.47.24)  
                     Instrument  Cluster  Finish Panel  Bezel  (88.20.33)  
                     Instrument  Panel  (76.46.01)  
                     Instrument  Panel  Finish Panel  (76.47.06)  
                     Instrument  Panel  Lower  Trim  Panel  (76.46.11)  
                     Overhead Console  (76.13.69)  

Filler Cap and P
ipe
The fuel
filler cap with bayonet-type fixi
ng is located beneath a remote-release sp ring-latched lid on the rear saddle panel
on the left-hand-side of the vehicle.
Fuel Pum
p
The fu
el pump(s) is energized by an ECM co
ntrolled relay. Fuel is drawn by this pu mp and supplied to the fuel injectors via
the fuel line, filter and fuel rails.
Servicing of the fuel pump re quires fuel tank removal.
Ev
aporative Loss Flange Assembly
The evaporative-loss flan
ge asse
mbly is mounted centrally on top of the tank. The flange assembly consists of a removeable
steel cap which mounts the evaporative emissions system vapor outlet valves and, if applicable, a pressure sensor. The
external electrical supply to th e fuel pump(s) is also made via a connector on the flange.
The flange assembly is fixed to the tank by a locking ring which is turned usin g special tool JD-174. A seal is fitted between
the flange assembly and the tank. Three di fferent flange assemblies are applicable according to the evaporative emission
system fitted to the vehicle. The fl ange size and fixing are identical fo r the three systems, as described.
Removal of the evaporative flange assembly is necessary to gain access to th e fuel pump(s) and other internal components.
To remove the evaporative fl ange assembly the fuel tank must first be removed.
The evaporative flange variant assemblies are described, together with service information, in Section 303-13.
Fuel R
eturn
Excess fuel
is directed back to
the fuel tank via a return line.
Fuel Pum
p Relay
The
fuel pump relay,
under control of the ECM, switches power to the fuel pump motor.
I
nertia Fuel Shutoff (IFS) Switch
The IF
S switch is located in the right-hand
side footwell behind the footboard carpet . When activated the switch isolates the
ignition system and fuel pump, releases any locked doors and disables unnecessary electrical systems. The system can be
reset by pressing down the flexible cover on the top of the switch.
• NOTE: The doors will not unlock if the IFS switch is tripped when the ignition switch is in position '0'.

Ai
r Distribution Box (ADB)

The upper air distribution box ADB, is fixed to the defog duct and instrument panel assembly, and seals by contact pressure
to the outlet (top) of the air conditioning unit. The ADB inco rporates two servo motor operated flaps which regulate airflow
to:
Windshield and door drop
glass
Instrument panel

- center, left
hand and right hand vents
The center vent duct incorporat es a baffle plate which balances the volume of air flow between the center and right and left
hand vents.
5R
ear intermediate footwell duct - RH
6R

ear footwell duct - RH
7R

ear face duct - RH
8R

ear face duct - LH
9R

ear footwell duct - LH
10R

ear intermediate footwell duct - LH
11D

river footwell duct - LHD
12Fac

e level duct -

LH
It
em
De
scription
1Ai

r outlet - side vent
2Servo motor -

instrume
nt panel center vent
3Servo motor -
defog vent
4Ai

r outlet - instrume
nt panel center vent
5Ai
r outlet - defog vent


It
em
De
scription
1Fac

e level duct - RH
2Passenger footwel

l duct - LHD
3Fac

e level duct - center
4Rear

face primary duct

Air Distribution and Filtering - Center Registers
Removal and Installation
Removal
Installation

1.
Remove battery cover and disconnect ground cable from battery
terminal. Refer to 86.15.19.
2. Remove passenger airbag deployment door for access. Refer to
Section 501-20.
3. Remove major gauge module veneer panel for access. Refer to
76.47.24.
4. Carefully withdraw fascia centre veneer panel.

5. Slacken and remove four screws securing centre vent assembly
to fascia.
6. Withdraw centre vent assembly for access, disconnect clock
harness multiplug, release clock retaining tangs and remove clock
from vent assembly.

7. Remove and discard the four veneer panel to fascia securing
clips.
1. Fit and fully seat new veneer panel retaining clips to fascia.
2. Fit clock to centre vent assemb ly, ensuring retaining tangs are
fully seated.
3. Position centre vent assembly at fascia and connect clock
harness multiplug.
4. Fully seat vent assembly in fascia and fit and tighten securing
screws.
5. Fit and fully seat centre veneer panel.
6. Fit major gauge module veneer panel. Refer to 76.47.24.
7. Fit passenger airbag deployment door. Refer to Section 501-20.
8. Connect ground cable to battery terminal and fit battery cover.
Refer to 86.15.15.

Control Components - Cold Air Bypass Blend Door Actuator
Removal and Installation
Removal
Installation

1.
Remove instrument panel for access; refer to 76.46.01.

2. Remove motor from heater / cooler assembly.
Remove connector.
Remove screws.
Remove motor.
1. Installation is a reversal of the removal procedure.