display Lexus GS350 2015 Navigation Manual

93
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
zDepending on the conditions, certain con-
figuration screen buttons cannot be
selected.
■ COMPASSNo.FunctionPage
Select to display the single
map screen.
Select to display the com-
pass mode screen.93
Select to display the turn list
screen.125
Select to display the arrow
screen.125
Select to display the motor-
way information screen.123
Select to display the inter-
section guidance screen or
the guidance screen on the
motorway.
124
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the dest ination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.

96
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
3. MAP SCREEN INFORMATION
1Select “Menu” on the map screen.
( → P.86)
2Select “Show POI” .
3Select the desired POI categories and
select “OK”.
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s” .
2Select the desired POI categories and
select “OK”.
“List all categories” : Select to display all
POI categories. To add more POI catego-
ries, select “More”.
DISPLAYING POI ICONS
POI icons such as petrol stations and
restaurants can be displayed on the map
screen. Their location can also be set as
a destination and used for route guid-
ance.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen
Select to turn the POI icons
on the map screen off.
Displays up to 6 POI icons
as favourite POI categories149
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
96
Select to search for the
nearest POIs. Then select
one of the categories.
97

97
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
■DISPLAYING THE LOCAL POI
LIST
1Select “List nearest POI’s” .
2Select the desired POI.
“On this route” : Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
3Check that the selected POI is dis-
played on the map screen.
1Select “Menu” on the map screen.
( → P.86)
2Select “Start route trace” .
3Check that the traveled line is displayed.
POIs that are within 20 miles (30 km) of
the current position will be listed from
among the selected categories.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display. This feature is available
when the map scale is 30miles (50 km)
or less.
START RECORDING THE
ROUTE TRACE

98
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
■STOP RECORDING THE ROUTE
TRACE
1Select “Menu” on the map screen.
( → P.86)
2Select “Stop route trace” .
3A confirmation screen will be displayed.
“Yes” : Select to keep the recorded route
trace.
“No” : Select to erase the recorded route
trace.
1 Place the cursor over an icon.
2Select “Info”.zTo edit the route trace name or confirm
the start point, etc.: →P.1 4 2
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is dis-
played on the upper part of the screen. If
“Info” appears on the right side of the
name bar, the detailed information can
be displayed.

99
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
“Enter ”: Select to set as a destination.
( → P.115) If a destination has already been
set, “Add to ” and “Replace ” will be dis-
played.
z “Add to ” : Select to add a destination.
z “Replace ” : Select to delete the existing
destination(s) and set a new one.
“Save” : Select to register as a memory
point.
:
Select to call the registered tele-
phone number.
“Edit” : Select to edit a memory point.
( → P.137)
“Delete” : Select to delete a destination or
memory point.
“QR code” : Select to display a QR code.
Destination information can be acquired by
scanning the QR code with a cellular
phone.
“Detail” : Select to display detailed informa-
tion.
INFORMATION
●
Even when traffic/parking information is
not currently being received, traffic infor-
mation and “Info” will be displayed for a
while after traffic information has been
received.
●In some situations, calls to a POI may
automatically change to an international
call or may not be possible as a domestic
call.
STANDARD MAP ICONS
IconInformation
Town with > 1 million people
Town with 500,000-1 mil-
lion people
Town with 200,000-
500,000 people
Town with 100,000-
200,000 people
Town with 20,000-
100,000 people
Town with 10,000-20,000
people
Town with < 10,000 people
Park/Monument
Golf Course
Airport
Hospital/Polyclinic
Shopping centre
University/College

100
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-TMCor TPEG (Transport Protocol Experts Group)
information. Depending on the country or ar-
ea, receiving RDS-TMC and TPEG informa-
tion may not be possible.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Traffic information” .
4Select the desired item.
“Traffic information” : Select to display a list
of current traffic information.
“Traffic prediction” : Select to display a map
with predictive traffic data.
Traffic information, traffic prediction in-
formation and parking lot information
can be viewed.
z The following 3 methods are available to
receive the above information:
• RDS-TMC* (Radio Data System-Traffic
Message Channel) using FM signals
• TPEG*-TEC (Traffic Event Compact), TPEG*-TFP (Traffic Flow Prediction)
and TPEG*-PKI (Live Parking Informa-
tion) using DAB
• TPEG*-TEC, TPEG*-TEP and TPEG*-
PKI via the internet by using Wi-Fi
® or a
cellular phone
For detailed information about connec-
tion methods for a Wi-Fi® device or cel-
lular phone: →P.45, 65
zReceiving information using a cellular
phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible cel-
lular phone with sufficient network cov-
erage and a SIM card with a contract
that allows access to the internet are
required.
• When using this service, depending on your telephone subscription, some
related fees might apply.
• When a cellular phone is used in a roaming situation (when outside the
geographical coverage area of mobile
network provider) connection fees will
be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION
INFORMATION
●
If a large amount of information is being
received, it may take longer than normal
for the information to be displayed on the
screen.

101
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
■DISPLAYING TRAFFIC INFORMA-
TION
1Display the “Traffic” screen. ( →P.100)
2Select “Traffic information” .
3Select the desired traffic event.
zWhen the destination has not been set, a
list of traffic information and the country in
which it can be received is displayed.
“On current road” : Select to display traffic
information for the current road.
z When the destination has not been set, a
list of traffic information with delay time and
distance from current position is displayed.
“All traffic information”: Select to display
all traffic information.
4Check that the traffic information is dis-
played.
“Map” : Select to display around traffic
event information.
“Detail” : Select to display detailed traffic
event information.
■ URGENT TRAFFIC EVENTS NOTI-
FICATION
■ TRAFFIC INFORMATION ON THE
MAP SCREEN
: The icons show traffic incident, road
repair, traffic obstacles, etc. Select to dis-
play the traffic information.
: The colour of the arrow changes
depending on the traffic information re-
ceived.
z Red: Closed road, accident, etc.
z Orange: Traffic congestion.
z Green: Normal traffic flow. (Note that
roads that are not covered by traffic infor-
mation are also shown in green.)
: The indicator is displayed when
traffic information has been received.
TRAFFIC INFORMATION
Traffic events near the current position
or the cursor position can be viewed as a
list.
If urgent traffic information is detected
around the current position, a pop-up
message is displayed on the screen. Se-
lect “Yes” to display the traffic informa-
tion.
Traffic information such as traffic con-
gestion, accidents and road closures are
displayed on the map screen. (For set-
ting traffic information icons displayed
on the screen: →P.153)

102
1. BASIC OPERATION
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
1Display the “Traffic” screen. (→P.100)
2Select “Traffic prediction” .
3Scroll the map to the point that it is de-
sired to view traffic prediction informa-
tion for.
zThe time of the traffic prediction informa-
tion can be viewed in 15-minute steps.
“+” : Moves the time forward 15 minutes.
“-” : Moves the time back 15 minutes.
“Info” : Select to display detailed informa-
tion.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Parking information” .
4Select the desired parking lot.
: Number of available parking space
“Sort” : (→ P.103)
“Search area” : Parking lot search
( → P.103)
5Check that the parking information is
displayed.
“Enter ”: Select to set as a destination.
( → P.115) If a destination has already been
set, “Add to ” and “Replace ” will be dis-
played.
z “Add to ” : Select to add a destination.
z “Replace ” : Select to delete the existing
destination(s) and set a new one.
“Map” : Select to display the map of the
parking.
“Detail” : Select to display detailed informa-
tion.
DISPLAYING TRAFFIC
PREDICTION MAP
Traffic prediction information relevant
to the area around the current position
or the cursor position can be viewed.PARKING INFORMATION
The location and available spaces of
parking lots can be checked. These
parking lots can also be set as a destina-
tion.

104
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
2. DESTINATION SEARCH
1. DESTINATION SEARCH OPERATION
To display this screen, select “Menu” on the map screen and select “Destination” on
the navigation menu screen. ( →P.88)
No.FunctionPage
Select to search for a destination by address.107
Select to search for a destination by point of interest.109
Select to search for a destination by online search.
The navigation system can use an internet search engine to set a desti-
nation using the most up to date information. After setting the search
engine to be used for “Online search”, the screen button name will
change to the search engine’s logo.
344
Select to change the search area.106

105
2. DESTINATION SEARCH
GS_Navi+MM_OM30F13E_(EE)
15.09.01 14:54
NAVIGATION SYSTEM
3
Select to search for a destination by the last displayed map.109
Select to search for a destination by memory points.110
Select to search for a destination from previously set destinations.110
Select to search for a destination by intersection.111
Select to search for a destination by motorway entrance/exit.111
Select to search for a destination by UK/NL postal code.114
Select to search for a destination by coordinates.112
Select to search for a destination by telephone number.112
Select to search for a destination by point of interest near cursor.113
Select to set a destination by home.106
Select to set a destination by quick access.106
No.FunctionPage