Lexus IS200t 2017 Navigation Manual

81
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION SYSTEM
3
*1Border guidanceWhen a vehicle crosses a borderline, the national
flag of that country is displayed.
*2Speed limit iconDisplays speed limits138
Route informa-
tion change but-
tonSelect to display the current street name, expect-
ed travel time/arrival time to the destination, or
the traffic information bar.
113
Route informa-
tion barDisplays the current street name, expected travel
time/arrival time to the destination or the traffic in-
formation bar as selected.
“Menu”Select to utilize functions such as setting a destina-
tion and registering a memory point.82
Zoom in/out but-
tonSelect to magnify or reduce the map scale. When
either button is selected, the map scale indicator
bar appears at the bottom of the screen.
84
Scale indicatorThis figure indicates the map scale.
Manual update
buttonSelect to update the traffic or parking lot informa-
tion manually. 146
Traffic indicatorShows that traffic information is received. Select
to display traffic information.93
*
1: Except for vehicles sold in Turkey
*2: Without RSA (Road Sign Assist)
INFORMATION
●
Certain screen buttons on the map screen w ill disappear several seconds after the Remote
Touch has been operated. This setting can be changed so that all the screen buttons will
always be displayed.( →P.1 3 8 )
●Press the “MAP” button on the Remote Touch to display the address of the current position
on the map screen or repeat voice guidance.
●If the current position is outside of the cove rage area, a compass screen will be displayed.
For details of the coverage area: →P.1 5 2
No.NameFunctionPage

82
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION MENU SCREEN
The navigation menu screen can be reached by the following methods:
Select “Menu” on the map screen. ( →P.80)

83
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION SYSTEM
3
No.FunctionPage
Select to search for a destination.98
Select to suspend or resume guidance.
Select to change routes and/or destinations and to view route over-
view.120
Select to enable changes to “Home”, “Memory points”, “Quick access”,
“Area to avoid”, etc.124
Select to set the desired map configuration.86
Select to set the Points of Interest to be displayed on the screen.89
Select to start/stop recording the route trace.90
Select to register the current position or the cursor position as a mem-
ory point. Can be changed to a desired name, icon, etc.124

84
1. BASIC OPERATION
IS_NAVI_EE
2. MAP SCREEN OPERATION
1Press the “MAP” button on the Remote
Touch.
2Check that the current position map is
displayed.
z Select if the navigation menu
screen is displayed.
z Selecting on the “Side Display” will
change the map screen to full screen dis-
play.
1Select or to change the
scale of the map screen.
z The scale indicator bar appears at the bot-
tom of the screen.
z Select and hold or to continue
changing the scale of the map screen.
z The scale of the map screen can also be
changed by selecting the scale bar directly.
: Select to display the entire route, if
the destination has been set.
CURRENT POSITION DISPLAY
z To correct the current position manually:
→ P.1 4 1
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●After 12-volt battery disconnection, or on
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
MAP SCALE
INFORMATION
●
Press the “” button on the Remote
Touch to zoom in on the map screen and
the “” button to zoom out.
●When the map scale is at the minimum
range, a one way street is displayed by
.

85
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select to display the city map.
zTo return to the normal map display, select
.
: North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol (When in 2D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
: Heading-up symbol (When in 3D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
CITY MAP
The city map is available for some major
cities. When a map scale of 50 yd. (50
m) is selected, the map display will
change to the city map in either 2D or
3D.ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol displayed
at the top left of the screen.

86
1. BASIC OPERATION
IS_NAVI_EE
1Select “Menu” on the map screen.
( → P.80)
2Select “Map Configuration” .
3Select the desired item.
zDepending on the conditions, certain con-
figuration screen buttons cannot be
selected.
SWITCHING MAP
CONFIGURATIONSNo.FunctionPage
Select to display the single
map screen.
Select to display the com-
pass mode screen.87
Select to display the turn list
screen.118
Select to display the arrow
screen.118
Select to display the motor-
way information screen.116
Select to display the inter-
section guidance screen or
the guidance screen on the
motorway.
117

87
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION SYSTEM
3
■COMPASS
zTo scroll over the map, place the cursor
mark in the desired position and then press
and hold the Remote Touch knob. The map
will continue scrolling in that direction until
the knob is released.
z Press the “MAP” button on the Remote
Touch to return to the current position.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the dest ination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the centre of the screen for
looking at a point on the map screen that
is different from the current position.
No.Information/FunctionPage
Cursor mark
Select to register the cursor
location as area to avoid.88
Select to register as a mem-
ory point. To change the
icon, name, etc.: →P.129
Select to set as a destina-
tion.109
Distance from the current
position to the cursor mark

88
1. BASIC OPERATION
IS_NAVI_EE
1Scroll the map to the desired point and
select “A v o i d ” .
2Select either or to
change the size of the area to be avoid-
ed and select “OK”.
1Select one of the 8 directional arrows to
move the cursor to the desired point.
REGISTERING THE CURSOR
LOCATION AS AN AREA TO
AVOID
A specific location on the map screen
can be set as an area to avoid using the
scroll function.
INFORMATION
●
If a destination is en tered in the area to
avoid or the route calculation cannot be
made without running through the area to
avoid, a route passing through the area to
be avoided may be shown.
●Up to 10 locations can be registered as
areas to avoid.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The exact target location can be adjust-
ed in small increments by selecting one
of the 8 directional arrows.

89
1. BASIC OPERATION
IS_NAVI_EE
NAVIGATION SYSTEM
3
3. MAP SCREEN INFORMATION
1Select “Menu” on the map screen.
( → P.80)
2Select “Show POI” .
3Select the desired POI categories and
select “OK”.
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s” .
2Select the desired POI categories and
select “OK”.
“List all categories” : Select to display all
POI categories. To add more POI catego-
ries, select “More”.
■DISPLAYING THE LOCAL POI
LIST
1Select “List nearest POI’s” .
2Select the desired POI.
“On this route” : Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
3Check that the selected POI is dis-
played on the map screen.
DISPLAYING POI ICONS
POI icons such as petrol stations and
restaurants can be displayed on the map
screen. Their location can also be set as
a destination and used for route guid-
ance.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen
Select to turn the POI icons
on the map screen off.
Displays up to 6 POI icons
as favourite POI categories140
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
89
Select to search for the
nearest POIs. Then select
one of the categories.
89
POIs that are within 20 miles (30 km) of
the current position will be listed from
among the selected categories.

90
1. BASIC OPERATION
IS_NAVI_EE
1Select “Menu” on the map screen.
( → P.80)
2Select “Start route trace” .
3Check that the traveled line is displayed.
■STOP RECORDING THE ROUTE
TRACE
1Select “Menu” on the map screen.
( → P.80)
2Select “Stop route trace” .
3A confirmation screen will be displayed.
“Yes” : Select to keep the recorded route
trace.
“No” : Select to erase the recorded route
trace.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display. This feature is available
when the map scale is 30miles (50 km)
or less.
START RECORDING THE
ROUTE TRACE
z To edit the route trace name or confirm
the start point, etc.: →P.1 3 4