Lexus IS300h 2013 Manual PDF

711-1. For safe use
1
For safety and security
IS300h_EE(OM53B95E)
Rear-facing  Baby seat/child seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature), secure
the child restraint system using a
locking clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
Installing child restraints using a seat belt
1
2

721-1. For safe use
IS300h_EE(OM53B95E)
Forward-facing Child seat
Remove the head restraint if it
interferes with your child
restraint system.
Place the child restraint system
on the seat facing the front of
the vehicle.
Run the seat belt through the
child restraint system and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature), secure
the child restraint system using a
locking clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
1
2
3

731-1. For safe use
1
For safety and security
IS300h_EE(OM53B95E)
Junior seat
Place the child restraint system
on the seat facing the front of
the vehicle.
Sit the child in the child
restraint system. Fit the seat
belt to the child restraint sys-
tem according to the manufac-
turer’s instructions and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Check that the shoulder belt is
correctly positioned over the
child’s shoulder and that the lap
belt is as low as possible. (P.
38)
Push the buckle release button and
fully retract the seat belt.
1
2
Removing a child restraint installed with a seat belt

741-1. For safe use
IS300h_EE(OM53B95E)
Remove the head restraint if it
interferes with your child
restraint system.
Latch the buckles onto the exclu-
sive fixing bars.
If the child restraint has a top strap,
the top strap should be latched onto
the anchor bracket.
Installation with ISOFIX rigid anchor
1
2

751-1. For safe use
1
For safety and security
IS300h_EE(OM53B95E)
Remove the head restraint if it
interferes with your child
restraint system.
Secure the child restraint system
using the seat belt or ISOFIX
rigid anchors.
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is securely
latched.
When installing a child restraint system
You need a locking clip to install the child restraint system. Follow the instruc-
tions provided by the manufacturer of the system. If your child restraint system
does not provide a locking clip, you can purchase the following item from any
authorized Lexus dealer or repairer, or another duly qualified and equipped pro-
fessional:
Locking clip for child restraint system
(Part No. 73119-22010)
Child restraint systems with a top strap
1
2
3

761-1. For safe use
IS300h_EE(OM53B95E)
CAUTION
When installing a child restraint system
Follow the directions given in the child restraint system installation manual and
fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of a sudden
braking, sudden swerving or an accident.
If the driver’s seat interferes with the
child restraint system and prevents it
from being attached correctly, attach the
child restraint system to the right-hand
rear seat (left-hand drive vehicles) or the
left-hand rear seat (right-hand drive vehi-
cles).
Adjust the front passenger seat so that it
does not interfere with the child restraint
system.
When installing a forward-facing child
restraint system on the front passenger
seat, move the seat as far back as possi-
ble.
Failure to do so may result in death or
serious injury if the airbags deploy
(inflate).

771-1. For safe use
1
For safety and security
IS300h_EE(OM53B95E)
CAUTION
When installing a child restraint system
Never use a rear-facing child restraint
system on the front passenger seat when
the airbag manual on-off switch is on.
(P. 54)
The force of the rapid inflation of the
front passenger airbag can cause death or
serious injury to children in the event of
an accident.
There is a label(s) on the passenger side
sun visor, indicating it is forbidden to
attach a rear-facing child restraint system
to the front passenger seat.
Details of the label(s) are shown in the
illustration below.

781-1. For safe use
IS300h_EE(OM53B95E)
CAUTION
When installing a child restraint system
If child restraint system regulations exist in the country where you reside,
please contact any authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional for the child restraint system installation.
When a junior seat is installed, always ensure that the shoulder belt is posi-
tioned across the center of the child’s shoulder. The belt should be kept away
from the child’s neck, but not so that it could fall off the child’s shoulder. Fail-
ing to do so may result in death or serious injury in the event of sudden brak-
ing, sudden swerving or an accident.
Ensure that the belt and plate are securely locked and the seat belt is not
twisted.
Shake the child restraint system left and right, and forward and backward to
ensure that it has been securely installed.
After securing a child restraint system, never adjust the seat.
Follow all installation instructions provided by the child restraint system
manufacturer.
To correctly attach a child restraint system to the anchors
When using the lower anchors, be sure that there are no foreign objects around
the anchors and that the seat belt is not caught behind the child restraint system.
Make sure the child restraint system is securely attached, or it may cause death
or serious injury to the child or other passengers in the event of a sudden brak-
ing, sudden swerve or an accident.

791-1. For safe use
1
For safety and security
IS300h_EE(OM53B95E)
Exhaust gas precautions
Harmful substance to the human body is included in exhaust gases if
inhaled.
CAUTION
Exhaust gases include harmful carbon monoxide (CO), which is colorless and
odorless. Observe the following precautions.
Failure to do so may cause exhaust gases enter the vehicle and may lead to an
accident caused by light-headedness, or may lead to death or a serious health haz-
ard.
Important points while driving
Keep the trunk lid closed.
If you smell exhaust gases in the vehicle even when the trunk lid is closed,
open the windows and have the vehicle inspected at any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional as soon
as possible.
When parking
If the vehicle is in a poorly ventilated area or a closed area, such as a garage,
stop the hybrid system.
Do not leave the vehicle with the hybrid system on for a long time.
If such a situation cannot be avoided, park the vehicle in an open space and
ensure that exhaust fumes do not enter the vehicle interior.
Do not leave the hybrid system operating in an area with snow build-up, or
where it is snowing. If snowbanks build up around the vehicle while the
hybrid system is operating, exhaust gases may collect and enter the vehicle.
Exhaust pipe
The exhaust system needs to be checked periodically. If there is a hole or crack
caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to
have the vehicle inspected and repaired by any authorized Lexus dealer or
repairer, or another duly qualified and equipped professional.

79
1
For safety and security
IS300h_EE(OM53B95E)1-2. Hybrid system
Gasoline engine
Electric motor (traction motor)
Hybrid system features
Your vehicle is a hybrid vehicle. It has characteristics different from con-
ventional vehicles. Be sure you are closely familiar with the characteris-
tics of your vehicle, and operate it with care.
The hybrid system combines the use of a gasoline engine and an electric
motor (traction motor) according to driving conditions, improving fuel
efficiency and reducing exhaust emissions.
1
2