turn signal MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) Owner's Guide

•When replacing the tyres, consult an expert repairer, we recommend an Authorised Mazda
Repairer. Replacing the tyres could result in deviation of the guide lines which appear on
the display.
•If the vehicle's front, side, or rear has been involved in a collision, the alignment of the
rear view parking camera (location, installation angle) may have deviated. Always
consult an expert repairer, we recommend an Authorised Mazda Repairer to have the
vehicle inspected.
•If “No Video Signal Available” is indicated in the display, there could be a problem with
the camera. Have your vehicle inspected at an expert repairer, we recommend an
Authorised Mazda Repairer.
•(Predicted vehicle path assist lines display type)
If force is applied to the steering wheel, the guide lines may not display. Loosen your grip
on the steering wheel to allow the guide lines to display.
▼Rear View Parking Camera Location
Rear view parking camera
▼Switching to the Rear
View Monitor Display
Shift the shift lever (manual transaxle) or the selector lever (automatic transaxle) to reverse
(R) with the ignition switched ON to switch the display to the rear view monitor display.
NOTE
When the shift lever (manual transaxle) or the selector lever (automatic transaxle) is shifted
from reverse (R) to another shift lever (manual transaxle) or the selector lever (automatic
transaxle) position, the screen returns to the previous display.
When Driving
Rear View Monitor
4-218
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Operating the Radio
Without Radio Data System (RDS)With Radio Data System (RDS) Band selector button Traffic announcement button Channel preset buttons
Scan button
Tuning button Programme-type information button
Audio display
Auto memory button
Audio display
Band selector button Channel preset buttons
Scan button
Tuning button
▼ Radio ON
Press a band selector button () to
turn the radio on.
▼ Band selection
Successively pressing the band selector
button (
) switches the bands as
follows: FM1→FM2→AM (Without
Radio Data System (RDS)), MW/LW
(With Radio Data System (RDS)).

The selected mode will be indicated.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise.
▼ Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Manual tuning
Select the station by pressing the tuning
button (
, ) lightly.
Interior Features
Audio Set [Type A (non-touchscreen)]
5-23
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from the
transmitter. Reception in such fringe areas
is characterised by sound breakup.
Strong signal noise
This occurs very close to a transmitter
tower. The bro adcast signals are extremely
strong, so the result is noise and sound
breakup at the radio receiver.
Station drift noise
When a vehicle reaches the area of two
strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Station 2
88.3 MHz
Station 1
88.1 MHz
▼
Operating Tips for CD Player
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or optical
components (prism and lens) in the CD
player may become clouded with
condensation. At thi
s time, the CD will
eject immediately when placed in the unit.
A clouded CD can be corrected simply by
wiping it with a soft cloth. Clouded optical
components will clear naturally in about
an hour. Wait for normal operation to
return before attempting to use the unit.
Handling the CD player
The following precau tions should be
observed.
•Do not use deformed or cracked CDs.
The disc may not eject resulting in a
malfunction.
•Do not use non-conventional discs such
as heart-shaped, octagonal discs, etc.
The disc may not eject resulting in a
malfunction.
Interior Features
Appendix
5-132
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

CAUTION
Do not disassemble the Mazda ERA-GLONASS. Otherwise, it could become damaged and
may not function in an emergency.
 The Mazda ERA-GLONASS has a special built-in battery so that it can operate even if the
power supply from the vehicle is cut such as in an accident.
Heed the following cautions. If the Mazda ER A-GLONASS is not used correctly it may not
operate.
 The built-in battery is not a rechargeable ty pe battery. Do not attempt to recharge the
battery.
 If the built-in battery power is low due to natural discharge and the system determines
that there is a problem, the Mazda ER A-GLONASS cannot be used. If the system
determines that there is a problem, the indicator light (red) in the Mazda ERA-GLONASS
switch turns on to notify the driver. Have the vehicle inspected at an Authorised Mazda
Repairer. Refer to Indicator light/Beep sound on page 7-10.
NOTE
•The Mazda ERA-GLONASS can be used when the ignition is switched ON.
•There are two ways the Mazda ERA-GLONASS makes calls; automatically or manually.
•The Mazda ERA-GLONASS may not operate in the following cases: If the Mazda
ERA-GLONASS does not operate, make a call from another telephone such as the nearest
available public telephone.
•The vehicle is outside of a mobile phone network area
•The vehicle is in a weak radio wave transmission environment (such as inside tunnels,
underground parking areas, shadow of buildings, and mountain areas)
•The vehicle does not receive an impact of a certain level or more even if an accident has
occurred.
•An extremely serious collision occurs resulting in damage to the Mazda
ERA-GLONASS.
•The position information cannot be obtained when signals cannot be received from the
GPS and GLONASS satellites, however, voice calls are possible.
•When a voice call is made by the Mazda ERA-GLONASS, the audio system is muted so
that it does not interfere with the call.
•It may take some time for the call centre to respond after the Mazda ERA-GLONASS first
starts operating.
•If you are unable to respond to an operator's questions after the voice call begins, the
operator may proceed with emergency procedures at their own discretion.
•Even if it is difficult for you to hear the operator's voice, your voice may be heard by the
call centre. Continue explaining your circumstances.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-5
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

After that, perform the following procedure.
Move the signal lever up to right
turn
Move the signal lever up to right
turn Move the signal lever down
to left turn
Move the signal lever down
to left turn
Return the signal lever to off
Return the signal lever to off
Return the signal lever to off
Return the signal lever to off
Return the signal lever to off
Move the signal lever up to right
turn Within five seconds
Within one second Within one second Within one second
Within one second
Within one second
Within one second
Within one second
Within one second Within five seconds
Within five second
Within one second
Turn on the hazard warning
lights.
Turn off the hazard warning
lights.
Both red and green Mazda
ERA-GLONASS switch
indicator lights turn on.
Press the Mazda
ERA-GLONASS switch for
one second or longer and
release it.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-12
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

If a Warning Light Turns On or Flashes
If any warning light turns on/flashes, take appropriate action for each light. There is no
problem if the light turns off, h owever if the light does not turn off or turns on/flashes again,
consult an Authorised Mazda Repairer.
(Vehicles with type B audio)
The details for some warnings can be viewed on the centre display.
1. If the warning light is turned on, select
icon on the home screen to display the
application screen.
2. Select “Vehicle Status Monitor”.
3. Select “Warning Guidance” to display the current warnings.
4. Select the applicable warni ng to view the warning details.
▼Stop Vehicle in Safe Place Immediately
If any of the following warning
lights turns on, the system may have a malfunction. Stop the
vehicle in a safe place immediately and contact an Authorised M azda Repairer.
SignalWarning
Brake System Warning
Light If the brake system warning ligh
t remains illuminated the brake fluid may be low or
there could be a problem with the brake system. Park the vehicl e in a safe place im-
mediately and contact an expert repairer, we recommend an Autho rised Mazda Re-
pairer.
WA R N I N G
Do not drive with the brake system warning light illuminated. Contact an expert repair‐
er, we recommend an Authorised Mazda Repairer to have the brakes inspected as soon
as possible:
Driving with the brake system warning light illuminated is dangerous. It indicates that
your brakes may not work at all or that they could completely fail at any time. If this
light remains illuminated, after checking that the parking brake is fully released, have
the brakes inspected immediately.
CAUTION
In addition, the effectiveness of the braking may diminish so you may need to depress
the brake pedal more st rongly than normal to stop the vehicle.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-43
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
Electronic Brake Force
Distribution System Wa r n i n g If the electronic brake force di
stribution control unit determines that some compo-
nents are operating incorrectly , the control unit may illuminate the brake system
warning light and the ABS warni ng light simultaneously. The problem is likely to be
the electronic brake force distribution system.
WARNING
Do not drive with both the ABS warning light and brake warning light illuminated.
Have the vehicle towed to an expert repairer, we recommend an Authorised Mazda Re‐
pairer to have the brakes inspected as soon as possible:
Driving when the brake system warning li ght and ABS warning light are illuminated
simultaneously is dangerous.
When both lights are illuminate d, the rear wheels could lock more quickly in an emer‐
gency stop than under normal circumstances.
Charging System Warn- ing Indication/Warning Light If the warning light illuminates while driving, it indicates a
malfunction of the alter-
nator or of the charging system.
Drive to the side of the road and park off the right-of-way. Co nsult an expert repairer,
we recommend an Author ised Mazda Repairer.
CAUTION
Do not continue driving when the charging system warning light is illuminated be‐
cause the engine could stop unexpectedly.
Engine Oil Warning Light This warning light indicates low engine oil pressure.
CAUTION
Do not run the engine if the oil pressure is
low. Otherwise, it could result in extensive
engine damage.
If the light illuminates or the w arning indication is displayed while driving:
1. Drive to the side of the road and park off the right-of-way o n level ground.
2. Turn off the engine and wait 5 minutes for the oil to drain b ack into the sump.
3. Inspect the engine oil level. (page 6-28) If it's low, add th e appropriate amount of
engine oil while being careful not to overfill.
CAUTION
Do not run the engine if the oil level is low. Otherwise, it could result in extensive
engine damage.
4. Start the engine and check the warning light.

If the light remains illuminated even though the oil level is normal or after adding oil,
stop the engine immediately and have your vehicle towed to an expert repairer, we
recommend an Authorised Mazda Repairer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-44
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
(Red)
High Engine Coolant
Temperature Warning
Indication/Warning
Light The light flashes when the engine coolant temperature is extrem
ely high, and illumi-
nates when the engine coolant temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine l oad until you can find a safe place to stop the vehicle
and wait for the engine to cool down.
Illuminated light
This indicates the possibility of overheating. Park the vehicle in a safe place immedi-
ately and stop the engine.
Refer to Overheating on page 7-37.
CAUTION
Do not drive the vehicle with the high engi ne coolant temperature warning light illumi‐
nated. Otherwise, it could resu lt in damage to the engine.
Power Steering Mal-
function Indication*
The message is displayed if the electric power steering has a m alfunction.
If the message is displayed, stop the vehicle in a safe place a nd do not operate the
steering wheel. There is no probl em if the message in the display turns off after a
while. Contact an expert repairer, we recommend an Authorised M azda Repairer if
the message is displayed continuously.
NOTE
•If the message is displayed , the power steering will not operate normally. In this
case, the steering wheel can still be operate d, however, the operation may feel heavy
compared to normal, or the steerin g wheel could vibrate when turning.
•Repeatedly jerking the steering wheel left and ri ght while the vehicle is stopped or
moving extremely slowly will cause the po wer steering system to go into protective
mode which will make the steering feel heavy, but this does not indicate a problem. If
this occurs, park the vehicle safely and wait several minu tes for the system to return
to normal.
Power Steering Mal- function Indicator
Light
*
The light illuminates/flashes if the electric power steering ha s a malfunction.
If the light illuminates/flashes, stop the vehicle in a safe pl ace and do not operate the
steering wheel. There is no problem if the light turns off afte r a while. Contact an ex-
pert repairer, we recommend an Authorised Mazda Repairer if the light illuminates/
flashes continuously.
NOTE
•If the indicator light illuminates/flashes, the power steering will not operate normal-
ly. In this happens, the steering wheel c an still be operated, however, the operation
may feel heavy compared to normal, or th e steering wheel could vibrate when turn-
ing.
•Repeatedly jerking the steering wheel left and ri ght while the vehicle is stopped or
moving extremely slowly will cause the po wer steering system to go into protective
mode which will make the steering feel heavy, but this does not indicate a problem. If
this occurs, park the vehicle safely and wait several minu tes for the system to return
to normal.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-45
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Contact Authorised Mazda Repai
rer and Have Vehicle Inspected
If any of the following warning lights o r the indicator light turns on/flashes, the system may
have a malfunction. Contact an expert repairer, we recommend an Authorised Mazda
Repairer to have your vehicle inspected.
Signal Warning
ABS Warning LightIf the ABS warning light stays on while you're driving, the ABS
control unit has detected
a system malfunction. If this occurs, your brakes will function normally as if the vehicle
had no ABS.
Should this happen, consult an e xpert repairer, we recommend an Authorised Mazda Re-
pairer as soon as possible.
NOTE
•When the engine is jump-sta rted to charge the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs, it is the result of the weak battery and does
not indicate an ABS malfunction.
Recharge the battery.
•The brake assist system does not operate while the ABS warning light is illuminated.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-46
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning
(Red)
Brake Pedal Opera-
tion Demand Warn-
ing Light
*
When only flashing
Flashes if there is the possibilit y of the vehicle not being held in the stopped position by
the AUTOHOLD function, such as on steep slopes. Depress and hol d your foot on the
brake pedal.
When flashing and beep sound is activated at the same time
The warning light flashes and th e beep sound is activated for about five seconds if there is
a problem with the system. If th e warning light flashes and the warning sound is activat-
ed, immediately depress the brak e pedal and stop using the AUTO HOLD function then
contact an expert repairer, we recommend an Authorised Mazda Re pairer.
WARNING
Immediately depress the brake pedal if the warning light flashes and the beep sound is acti‐
vated while using the AUTOHOLD function:
Because the AUTOHOLD function is cancelled forcibly, the vehicle may move unexpectedly
and result in an accident.
Electric Parking
Brake (EPB) Indica-
tion/Indicator Light This warning has the following functions:
Parking brake warning/Indicator light inspection
The light illuminates when the el
ectric parking brake (EPB) is applied with the ignition
switched to START or ON. It turns off when the electric parking brake (EPB) is released.
When the light is turned on
If the light remains turned on e ven if the electric parking brake (EPB) switch is released,
an expert repairer, we recommend an Authorised Mazda Repairer.
When the light is flashing
The light flashes if the electric parking brake (EPB) has a mal function. If the light re-
mains flashing even if the elect ric parking brake (EPB) switch is operated, consult an ex-
pert repairer, we recommend an Au thorised Mazda Repairer as soon as possible.
Check Engine LightIf this light illuminates while d
riving, the vehicle may have a problem. It is important to
note the driving conditions when the light illuminated and consult an expert repairer, we
recommend an Authorised Mazda Repairer.
The check engine light may illuminate in the following cases:
•The engine's electrical system has a problem.•The emission control system has a problem.•The fuel tank level being very low or approaching empty.
If the check engine light remains on, or it flashes continuously , do not drive at high
speeds and consult an expert rep airer, we recommend an Authorised Mazda Repairer as
soon as possible.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-48*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2