tow bar MAZDA PROTEGE 1992 Workshop Manual

J2 TRANSAXLE
03UOJZ018
Driveshaft
Caution
l Do not shock the tripod joint when removing the
driveshaft.
1. Separate the driveshaft from the transaxle by prying with
a bar inserted between the outer ring and the transaxle.
2. Suspend the driveshaft with a rope.
Transaxle
1. Lean the engine toward the transaxle.
2. Support the transaxle with a jack.
3. Remove the transaxle mounting bolts.
4. Remove the transaxle.
DISASSEMBLY
Precaution
1. Clean the transaxle exterior thoroughly with a steam cleaner or cleaning solvent before disassembly.
2. Clean the removed parts (except sealed bearings) and all sealing surfaces with cleaning solvent, and dry
with compressed air. Clean out all holes and passages with compressed air, and verify that there are no
obstructions.
3. Wear eye protection when using compressed air to clean components.
03UOJ2-020
J2-12