Start MITSUBISHI MIRAGE 2015 6.G Manual PDF

AM/FM electronically tuned radio with CD player (if so equipped)
Comfort controls 7-21
7
2. To stop the CD, turn off the power by pressing the PWR switch for 2 seconds orlonger, or change over to the radio mode by pressing the RADIO button, or eject the disc by pressi
ng the eject button.
When the CD eject button is pressed, the disc automatically stops and is ejected. Press the CD button if a disc is already in the CD player. The CD player will enter CD
mode and start playba
ck. The track number
and the playing time will appear on the dis-play. The tracks in the disc will be played continuously. This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, a
nd Romeo formats. Each
disc can hold up to 255 files in up to 100 fold- ers, up to a maximum of 16 levels. The ID3 tag information can be displayed during MP3playback. For information concerning ID3 tags, refer to “CD text
and MP3 title display”
on page 7-23. 1. Insert a disc containing MP3 files into the slot. 2. Press the CD button if a disc is already in the CD player.The display shows “READING”, then playback will begin.
NOTE
 For information on adjusting the volume and tone, refer to “To adju
st the volume” on page
7-18 and “To adjust the tone” on page 7-19.  3 inches (8 cm) compact disc cannot be played on this CD player.  For information concerning the handling of compact discs, refer to “Handling of com- pact discs” on page 7-40.
To eject a disc

NOTE
 If you do not remove the disc before 15 sec- onds have elapsed, the CD player will auto-matically reload the disc and stop.
To listen to a music CD

To listen to an MP3 CD

NOTE
 While listening to a disc on which CD-DA (CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read-ing of the CD-DA, reading of the MP3 files, and the external audi
o input mode by press-
ing the CD button for 2 seconds or longer(until you hear a beep). For information on the external audio input, refer to “To use the external audio inputfunction” on page 7-26.  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati- cally played first.  The playback sound quality differs depend- ing on the encoding software and the bit rate. For details, refer to the user manual of yourencoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3 files recorded with certain writing softwareor CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.  This unit does not record MP3 files.  For information on CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-41.
BK0212400US.book 21 ページ ２０１４年４月１日　火曜日　午後２時２１分

AM/FM electronically tuned radio with CD player (if so equipped) 7-22 Comfort controls
7
Folder selection orde
r/MP3 file playback
order (Example)
The disc is fast-forwarded while the but- ton is held down.Playback will begi
n once the button is
released. The disc is fast-reversed while the button is held down.Playback will begi
n once the button is
released. The disc will skip as
many songs as the num-
ber of times the but
ton is pressed.
The display window will display the track number of the track selected. The disc will skip as
many songs as the num-
ber of times the but
ton is pressed.
The display window will display the tracknumber of the track selected.
Operate the SEL switch to
select desired file.
When this mode is activated by pressing the SEL switch, the SEL i
ndicator will be dis-
played in the display.
CAUTION Attempting to play a file not in the MP3 for- mat which has the “.mp3” file name mayproduce noise from the speakers and speakerdamage, and can da
mage your hearing.
Folder selection in the order File selection in the order
Root folder (Root directory)
Level 1 Level 3 Level 4
Level 2
To fast-forward/reverse the disc

Fast-forward Fast-reverseTo select a desired track

Tr a c k u pTr a c k d o w n
To find a file (MP3 CDs only)

Press the SEL switch :To start this mode or
to select the folder or file.
Turn the SEL switch :To show the folder or
file
NOTE
 To cancel the selecti
on, press the button
to return to the previous step.  If no operation is perf
ormed for 10 seconds
or more or other butt
on is operated after the
SEL switch has been turned, searching of the desired file is canceled.  If no operation is performed for 5 seconds or more after the file is
displayed, playback
starts.  When the SEL indicato
r is not shown on the
display and the SEL switch is operated, thevolume adjustment is activated.
BK0212400US.book 22 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped)
Comfort controls 7-27
7
N00762200056
You can connect your iPod or USB memory device to the USB input terminal and playmusic files stored in the iPod or USB mem- ory device. See the following section for the types ofconnectable devices
and supported files.
Refer to “Types of connectable devices and supported file specifications” on page 5-103.See the following sections for the connecting methods, “How to conne
ct an iPod” on page
5-102 and “How to connect a USB memorydevice” on page 5-101. If your vehicle is equipped with a Bluetooth
®
2.0 interface, you can play music files in your iPod or USB memory de
vice via voice opera-
tion. Refer to “To play iPod
tracks via voice opera-
tion” on page 7-29 and “To play USB mem-
ory device tracks via voice operation” on page 7-35.
N00762300060
N00762400087
1. Press the PWR switch to turn on the audio system. The system turns on in the lastmode used. 2. Connect your iPod to the USB input ter- minal.Refer to “How to connect an iPod” on page 5-102. 3. Press the CD button several times toswitch to the iPod mode. The input mode changes as follows every time the CD but- ton is pressed: CD mode
 iPod mode
 Bluetooth
® mode (if so equipped)

AUX mode
 CD mode.
The iPod indicator are illuminated andthen the iPod mode will be activated. 4. Once the device is selected, playback starts and indicato
r appears on the dis-
play.
 If the connection cord
alone is left connected
to the auxiliary audi
o connector, noise may
be produced from the speakers.  For information on how to connect and oper- ate the commercially av
ailable audio equip-
ment, refer to the ow
ner’s manual for the
commercially availabl
e audio equipment.
To play tracks from USB device
(if so equipped)
NOTE
NOTE
 A file protected by c
opyright might not be
able to playback.  It is recommended to adjust the equalizer of the connected device to 0 db or neutral.
iPod control panel and display

1- CD (Mode changeover) button 2- RADIO button 3-
DISP (Title display)/ (Return) but- ton
4-
(USB device active) indicator
5- iPod indicator 6- Display 7- TRACK indicator8- RPT (Repeat mode) indicator
9- RDM (Random mode)/F-RDM (Folder
random mode) indicator
10- SEL (Select)
indicator
11- PAGE (Title scroll) button 12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
14- PWR (On-Off)/SEL (Select) switch 15- RPT (Repeat) button 16- RDM (Random) buttonTo play from an iPod

BK0212400US.book 27 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped) 7-28 Comfort controls
7
5. To stop the playback, press the RADIO button or CD button to switch to a differ-ent mode.
N00762500033
To fast-forward/reverse the current track, press the button or button. To fast-forward the current track, press the
button. While the button is kept pressed,
the track will be fast-forwarded.
To fast-reverse the current track, press the button. While the button is kept pressed, the track will be fast-reversed.
N00762600034
Press the button repeatedly until the desired track number appears on the display. Press the button repeatedly until the desired track number appears on the display.
N00762700077
You can select desired tracks from the “Playl- ists”, “Artists”,
“Albums”, “Songs” or
“Genre” (vehicles with Bluetooth
® 2.0 inter-
face) menus on your iPod. Operate the SEL switch to select desired tracks. The selected menu or category or track is shown in the display.When this mode is activated by pressing the SEL switch, the SEL i
ndicator will be dis-
played in the display.
NOTE
 Depending on the condition of your iPod, it may take a longer time
before the playback
starts.NOTE
 Buttons on the iPod are disabled while the iPod is connected to the audio system.  To adjust the volume and tone, refer to “To adjust the volume” on page 7-18 and “To adjust the tone” on page 7-19.
To fast-forward/reverse the track

Fast-forward
Fast-reverseTo select a desired track

Tr a c k u p Tr a c k d o w n
NOTE
 Pressing the button once during the song will cause the audio system to restart play- back from the beginning of the song.
To find a track from the iPod menu

Press the SEL switch :To start this mode or
to select the menu or category or track.
Turn the SEL switch :To show the menu or
category or track.
NOTE
 To cancel the selecti
on, press the button
to return to the previous step.  If no operation is perf
ormed for 10 seconds
or more or other butt
on is operated after the
SEL switch has been pressed, searching of the desired tracks is canceled.  If no operation is performed for 5 seconds or more after the track is
displayed, playback
starts.  When the SEL indicato
r is not shown on the
display and the SEL switch is operated, the volume adjustment is activated.
BK0212400US.book 28 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped)
Comfort controls 7-29
7
N00762800023
Press the RPT button during playback to show “RPT” in the display. To exit this mode, press the button again.
N00762900024
Press the RDM button to show “RDM” in thedisplay. The iPod randomly select
s tracks from the
current category and plays the selected tracks.To exit this mode, press the button again.
N00763000035
Press and hold the RDM button until you heara beep to show “F-RDM” in the display.The iPod randomly sele
cts tracks in the
album from the current category and play the selected tracks.To exit this mode, press the button again.
N00763100049
You can display the track titles, artist names,genre and album titles recorded in the iPod. The display changes as follows every time the DISP button is pressed during playback:
Album title
 Track name
 Artist name

Genre (vehicles with Bluetooth
® 2.0 inter-
face)
 Normal display.
N00763200040
Desired tracks can be
selected and played
from your iPod by “Artis
t”, “Album”,
“Playl-
ist” and “Genre” us
ing voice commands.
For information concerning the voice recog- nition function or spea
ker registration func-
tion, refer to “Bluetooth
® 2.0 interface” on
page 5-81. The following explains how to prepare forvoice operation and play the tracks.
N00763300067
To use the voice operation, press the SPEECH button (A) first.
N00763400039
1. Say “Play” on the main menu.
To play the same track repeatedly

To play tracks in random order

To play tracks in each album in random order

To switch the display

NOTE
 Up to 11 characters are shown in the display at once. If the title is cut off in the middle,press the PAGE button. The next characters are displayed every time this button is pressed.  If no title is stored, “NO TITLE” is shown in the display.  Characters that cannot
be displayed are sub-
stituted by “•”.
To play iPod tracks via voice operation (vehicles with Blue- tooth
® 2.0 interface)

Preparation for voice operation

To search by artist name

NOTE
 The Bluetooth
® 2.0 interface
starts recogniz-
ing the connected device. If the connected device
cannot be recognized
or a connection error
occurs, the Bluetooth
®
2.0 interface starts an appropriate voice guide. Follow th
e voice guide.
BK0212400US.book 29 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped) 7-30 Comfort controls
7
2. After the voice guide says “Would you like to play by Artist, Album, Playlist orGenre?,” say “Artist”. 3. After the voice guide
says “What Artist
would you like to play?,” say the artist name.4. If there is only one ma
tch, the system pro-
ceeds to step 6. 5. If there are two or more matches, thevoice guide will say “More than one match was found, would you like to play <artist name>?” If you
say “Yes,” the sys-
tem proceeds to step 6. If you say “No,” the next matching artist is uttered by the system.
6. After the voice guide
says “Playing <artist
name>,” the system creates a playlistindex for the artist. 7. The system exits
the voice recognition
mode and starts playback.
N00763500030
1. Say “Play” on the main menu. 2. After the voice guide says “Would you like to play by Artist, Album, Playlist orGenre?,” say “Album”.
3. After the voice gui
de says “What Album
would you like to play?” say the album title. 4. If there is only one ma
tch, the system pro-
ceeds to step 6. 5. If there are two or more matches, the voice guide will say “More than onematch was found, would you like to play <album title>?” If yo
u say “Yes,” the sys-
tem proceeds to step 6.If you say “No,” the name of the next matching album is uttered by the system. 6. After the voice gui
de says “Playing
<album title>,” the system creates a playl- ist index for the album title.
NOTE
 If you say “Artist <name>,” you can skip step 3.NOTE
 If you say “No” to three or all artist names uttered by the system, the voice guide willsay “Artist not found, please try again” andthe system returns to step 2.  Search time depends
on the number of songs
on your connected devi
ce. Devices contain-
ing a large number of songs may take longer to return search results.
NOTE
 If the confirmation function is active, the voice guide confirms if
the artist name is
correct. If the artist name is correct, say “Yes”. If not, say “No”. After the voice guidesays “Artist not found, please try again,” the system returns to step 2.
To search by album title

NOTE
 The Bluetooth
® 2.0 interface
starts recogniz-
ing the connected device. If the connected device
cannot be recognized
or a connection error
occurs, the Bluetooth
®
2.0 interface starts an appropriate voice guide. Follow the voice guide.
NOTE
 If you say “Album <title>,” you can skip step 3.NOTE
 If you say “No” to three or all album titles uttered by the system, the voice guide will say “Album not found, please try again” and the system returns to step 2.
BK0212400US.book 30 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped)
Comfort controls 7-31
7
7. The system exits
the voice recognition
mode and starts playback.
N00763600031
1. Say “Play” on the main menu. 2. After the voice guide says “Would you like to play by Artist, Album, Playlist or Genre?,” say
“Playlist”.
3. After the voice guide says “What Playlist would you like to play?,” say the playlist name. 4. If there is only one match, the system pro-ceeds to step 6. 5. If there are two or more matches, the voice guide will say “More than onematch was found, would you like to play <playlist>?” If you say “Yes,” the system proceeds to step 6.If you say “No,” the
next matching playl-
ist name is uttered by the system. 6. After the voice gui
de says “Playing
<playlist>,” the system creates an index for the playlist.
7. The system exits the voice recognition mode and starts playback.
N00763700032
1. Say “Play” on the main menu. 2. After the voice guide says “Would you like to play by Artist, Album, Playlist or Genre?,” say “Genre”.
NOTE
 If the confirmation f
unction is active, the
voice guide confirms if
the album title is cor-
rect. If the album title is correct, say “Yes”.If not, say “No”. Afte
r the voice guide says
“Album not found, please
try again,” the sys-
tem returns to step 2.
To search by playlist

NOTE
 The Bluetooth
® 2.0 interface
starts recogniz-
ing the connected device. If the connected device
cannot be recognized
or a connection error
occurs, the Bluetooth
®
2.0 interface starts an appropriate voice guide. Follow th
e voice guide.
NOTE
If you say “Playlist <pla
ylist>,” you can skip
step 3.If the device has no playlist, the voice guidewill say “There are
no playlists stored on
device” and the system returns to step 2.NOTE
 If you say “No” to three
or all playlist names
uttered by the system, the voice guide will say “Playlist not found,
please try again” and
the system returns to step 2.
NOTE
 If the confirmation f
unction is active, the
voice guide confirms if
the playlist name is
correct. If the playlist name is correct, say“Yes”. If not, say “No”. After the voice guide says “Playlist not found, please try again,” the system returns to step 2. Refer to “Con-firmation function se
tting” on page 5-85.
To search by genre

NOTE
The Bluetooth
® 2.0 interface
starts recogniz-
ing the connected device.If the connected device
cannot be recognized
or a connection error
occurs, the Bluetooth
®
2.0 interface starts an appropriate voice guide. Follow th
e voice guide.
NOTE
If you say “Genre <type>,” you can skip step 3.
BK0212400US.book 31 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped) 7-32 Comfort controls
7
3. After the voice guide says “What Genre would you like to play?,” say the musictype. 4. If there is only one ma
tch, the system pro-
ceeds to step 6.5. If there are two or more matches, the voice guide will say “More than one match was found, would you like to play<genre>?” If you say “Yes,” the system proceeds to step 6. If you say “No,” the next matching genre is uttered by the system. 6. After the voice gui
de says “Playing
<genre>,” the system creates an index for the genre.
7. The system exits
the voice recognition
mode and starts playback.
N00763900063
N00764000087
1. Press the PWR switch to turn on the audio system. The system turns on in the last mode used. 2. Connect your USB memory device to the USB input terminal.Refer to “How to connect a USB memory device” on page 5-101. 3. Press the CD button several times toswitch to the USB mode. The input mode changes as follows every time the CD but- ton is pressed: CD mode
 USB mode
 Bluetooth
® mode (if so equipped)

AUX mode
 CD mode.
The USB indicator are illuminated andthen the USB mode will be activated. 4. Once the device is
selected, playback
starts and indicator appears on the dis- play.
NOTE
 If you say “No” to three
or all genres uttered
by the system, the voice guide will say “Genre not found, please try again” and the system returns to step 2.NOTE
 If the confirmation function is active, the voice guide confirms if the genre is correct.If the genre is correct, say “Yes”. If not, say “No”. After the voice
guide says “Genre not
found, please try again,” the system returnsto step 2. Refer to
“Confirmation function
setting” on page 5-85.
USB control panel and display

1- CD (Mode changeover) button 2- RADIO button 3-
DISP (Title display)/ (Return) but- ton
4-
(USB device ac
tive) indicator
5- USB indicator 6- Display 7- TRACK indicator8- RPT (Repeat mode)/F-RPT (Folder
repeat mode) indicator
9- RDM (Random mode)/F-RDM (Folder
random mode) indicator
10- SEL (Select)
indicator
11- PAGE (Title scroll) button12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
14- PWR (On-Off)/SEL
(Select) switch
15- RPT (Repeat) button 16- RDM (Random) buttonTo play from a USB memory device

NOTE
 Depending on the condition of your USB device, it may take a
longer time before the
playback starts.
BK0212400US.book 32 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped)
Comfort controls 7-33
7
5. To stop the playback, press the RADIO button or CD button to switch to a differ-ent mode.
N00764100105
This audio can play MP3, WMA and AACfiles recorded in a USB memory device. Thisaudio supports up to 65,535 files in 700 fold- ers on 8 levels. The folder and file hierarchy in the USB memory device is shown below.
N00764200034
To fast-forward/reverse the current track, press the button or button.
To fast-forward the current track, press the
button. While the button is kept pressed,
the track will be fast-forwarded. To fast-reverse the current track, press the button. While the button is kept pressed, the track will be fast-reversed.
N00764300035
Press the button repeatedly until the desired file number a
ppears on the display.
Press the button repeatedly until the desired file number a
ppears on the display.
NOTE
To adjust the volume and tone, refer to “To adjust the volume” on page 7-18 and “To adjust the tone” on page 7-19.
Supported compressed music files

Folder selection order/file playback order (example)
Folder selection In the order File selection In the order
NOTE
 If a file protected by copyrights is played, the file will be skipped.
To fast-forward/reverse the track

Root folder (Root directory)
Level 1 Level 2 Level 3 Level 4
Fast-forward Fast-reverseTo select a file

Tr a c k u p Tr a c k d o w n
NOTE
 Pressing the button once during the song will cause the audio system to restart play- back from the beginning of the file.
BK0212400US.book 33 ページ ２０１４年４月１日　火曜日　午後２時２１分

To play tracks from USB device (if so equipped) 7-34 Comfort controls
7
N00703100012
Operate the SEL switch to
select desired file.
When this mode is activated by pressing the SEL switch, the SEL i
ndicator will be dis-
played in the display.
N00764500024
Press the RPT button to show “RPT” in the display. To cancel this
mode, press the button
again.
N00764600038
Press and hold the RPT button until you hear a beep to show “F-RPT” in the display. All tracks in the current folder are played repeatedly. To exit this mode, press the button again.
N00764700039
Press the RDM button to show “F-RDM” inthe display.The audio randomly selects tracks from the current folder and plays the selected tracks. To exit this mode, press the button again.
N00764800030
Press and hold the RDM button until you hear a beep to show “RDM” in the display. The audio randomly selects tracks from allfolders and plays the selected tracks.
To exit this mode, press the button again.
N00765100043
You can displays titles with tag information. The display changes as follows every time the DISP button is pressed during playback:Folder name
 File name
 Normal display.
1. Press and hold the DISP button until you hear a beep.2. The display changes
as follows every time
the DISP button is pressed briefly: Album TA G
 Track TAG
 Artist TAG

Genre TAG (vehicles with Bluetooth
® 2.0
interface)
 Normal display.
To find a file

Press the SEL switch :To start this mode or
to select the folder or file.
Turn the SEL switch :To show the folder or
file.
NOTE
 To cancel the selection, press the button to return to the previous step.  If no operation is perfo
rmed for 10 seconds
or more or other butt
on is operated after the
SEL switch has been turned, searching of the desired file is canceled.  If no operation is performed for 5 seconds or more after the file is
displayed, playback
starts.  When the SEL indicato
r is not shown on the
display and the SEL switch is operated, thevolume adjustment is activated.
To play the same file repeatedly

To play the files in the same folder repeatedly

To play a folder in random order

To play all folders in random order

To switch the display

Folder title Tag information
NOTE
 Press and hold the DISP button again until you hear a beep, and the tag information dis-play returns to the folder title display.  Up to 11 characters are shown in the display at once. If the title is cut off in the middle, press the PAGE button. The next characters are displayed every time this button ispressed.
BK0212400US.book 34 ページ ２０１４年４月１日　火曜日　午後２時２１分