display NISSAN GT-R 2011 Owners Manual

Black plate (101,1)
Model "R35-N" EDITED: 2009/ 10/ 30
TER>.
4. Highlight [Stored Routes] and push <EN-
TER>.
5. Highlight [Store Current Route] and push <ENTER> .
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The current
route is stored.
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored. When
5 routes are stored in the Address Book, a
new route cannot be stored until a route is
deleted.“DELETING STORED ITEM” page 2-
88
. If any waypoints are not set on the route, the
route cannot be stored.
STORING TRACKED ROUTEA travelled route up to the current location can
be stored. A maximum of 5 tracked routes can
be stored.
1. Push <MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.3. Highlight [Store Tracking] and push <EN-
TER>.
4. A confirmation message is displayed. Confirm the contents of the message, high-
light [Yes] and push <ENTER>.
The tracked route you have traveled is
stored.
5. Push <MAP>or<BACK> to return to the
current location map screen.
INFO:
. A maximum of 5 tracked routes can be
stored. When 5 tracked routes are stored in
the Address Book, a new tracked route
cannot be stored until a tracked route is
deleted.“DELETING STORED ITEM” page 2-
88
Navigation
2-75

Black plate (104,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[Stored Location]:
Edits the information of a stored home and
Address.
“Editing stored home and address”
page 2-78
. [Stored Routes]:
Edits the information of a stored route.“Editing stored route” page 2-84
. [Stored Tracking]:
Edits the information of a stored tracked
route.“Editing stored tracking” page 2-84
. [Avoid Area]:
Edits the information of a stored Avoid Area.“Editing avoid area” page 2-86
. [Delete Stored Items]:
Deletes a stored location or route.“Deleting all stored items” page 2-90
. [Transfer Address Book]:
Imports or exports the data of the stored
items using a USB memory.
Editing stored home and address1. Highlight [Stored Location] and push <EN-
TER>.
2. Highlight the stored home location or pre- ferred stored address and push <ENTER>.
INFO:
Highlighting [Sort] displays a list of various
sort functions.
To use the sort functions, stored locations
must be set in advance.“Minor adjustment of home or stored
address” page 2-79
3. Highlight the preferred item and push <ENTER> .
Available setting items
. [Edit]:
Edits the stored address information.
. [Move Location]:
Adjusts the location of the stored address.
. [Delete]:
Deletes the stored address.
. [OK]:
Applies the settings.Other settings:A stored address can also be edited using the
following procedure.
2-78
Navigation

Black plate (105,1)
Model "R35-N" EDITED: 2009/ 10/ 30
1. Push<DEST>.
2. Highlight [Address Book] and push <EN-
TER>.
3. Highlight [Store/Edit] and push <ENTER>.
Minor adjustment of home or stored
addressWhen [Edit] is selected, you can edit the
following items of the home or stored location
can be edited.
.[Show Icon on Map]:
. [Name] (only for stored locations):
. [Voicetag] (only for stored locations):
. [Icon]:
. [Sound]:
. [Direction]:
. [Distance]:
. [Phone No.]:
. [Group] (only for stored locations):
. [Entry Numbers] (only for stored locations):
Show Icon on Map:Displays the home icon or the stored address
icon on the map.1. Highlight [Show Icon on Map] and push
<ENTER> .
2. The indicator illuminates when the item is set. Then the system displays the icon on
the map.
Navigation
2-79

Black plate (106,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Name (only for stored locations):Changes the name of a stored location.1. Highlight [Name] and push<ENTER>.
A character input screen is displayed.2. Enter the preferred name for the stored location.
“HOW TO INPUT LETTERS AND
NUMBERS” page 1-16
3. Highlight [OK] and push <ENTER>.
The name is stored.
Voicetag (only for stored locations):1. Highlight [Voicetag] and push <ENTER>.2. Highlight [Store] and push <ENTER>.
3. A beep sounds, and the system enters the
voice command reception mode.
4. Speak the name/word to be used as Voicetag.
5. The Voicetag is stored, provided the system recognizes it.
INFO:
. A Voicetag cannot be stored, overwritten or
played while driving.
. The Address Book can store up to 100
Voicetags.
. Highlight [Play] to confirm the stored Voice-
tag.
. Highlight [Delete] to delete a stored Voice-
tag.
2-80
Navigation

Black plate (107,1)
Model "R35-N" EDITED: 2009/ 10/ 30
.If a Voicetag is already stored, select
[Restore] to re-record the Voicetag.Icon:Changes the icon of the home or stored address
to the preferred one. By changing the icons, the
usage of the [By Icon] option of the sort function
can be optimized more effectively ([Sort] menu
situation) .1. Highlight [Icon] and push <ENTER>.
A list of icons is displayed.
2. Highlight the preferred icon and push
<ENTER> .
3. The icon is changed.Sound:Sets the tone of the alarm that sounds when the
vehicle approaches the home or a stored
address.1. Highlight [Sound] and push <ENTER>.
A sound list is displayed.2. Select the preferred alarm tone and push <ENTER>
.
The indicator of the selected alarm tone
illuminates.
Direction:Sets the alarm to sound when approaching from
a specific direction.1. Highlight [Direction] and push <ENTER>.
A map screen with the home or stored
location located on the map center is
displayed.
Navigation
2-81

Black plate (108,1)
Model "R35-N" EDITED: 2009/ 10/ 30
2. Set the direction that sounds the alarm andpush <ENTER> .
The selected direction is set.
INFO:
After the direction is set and [Direction] is
selected and set again, a confirmation message
is displayed. Confirm the contents of the
message, highlight [Yes] and push <ENTER>.
The set direction is overwritten.
Distance:Sets the alarm to sound when reaching a
specific distance to the home or stored address.1. Highlight [Distance] and push <ENTER>.
2. Highlight the preferred distance option and
push <ENTER> . The indicator of the
selected distance illuminates.
Available distance options:
. 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m)
. 1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone number:Stores the telephone number of the home or a
stored location.
1. Highlight [Phone No.] and push <ENTER>.
The telephone number entry screen is
displayed.2. Enter the telephone number of the home or
stored location.
“NUMBER INPUT SCREEN” page 1-
17
3. Highlight [OK] and push <ENTER>.
The telephone number is stored.
2-82
Navigation

Black plate (109,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations):This groups the stored locations.
By grouping the stored locations, the [By Group]
option of the sort function can be used more
effectively in the [Sort Entries] mode.1. Highlight [Group] and push <ENTER>.
2. Highlight the preferred group and push
<ENTER> .
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.Entry Numbers (only for stored loca-
tions):Index the position numbers of any two stored
locations in the list.1. Highlight [Entry Numbers] and push <EN-TER>.
A list of stored locations is displayed.
2. Highlight the stored addresses that you
want to change and push <ENTER>.
The position numbers of the selected stored
locations are changed.
Navigation
2-83

Black plate (110,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Editing stored route1. Highlight [Stored Routes] and push<EN-
TER>.
2. Highlight the preferred stored route and push <ENTER> .3. Highlight the preferred item to edit from the
list on the right side of the screen and push
<ENTER> .
4. After finishing the editing, highlight [OK] and push <ENTER> .
INFO:
If [Store Current Route] is selected, the system
stores the current route.
Available setting items
. [Rename]:
Changes the name.“CHARACTER (letters and numbers)
INPUT SCREEN” page 1-16
. [Replace]:
Overwrites the stored route to the current
route.
. [Delete]:
Deletes the stored route.
. [OK]:
Applies the settings.
Editing stored tracking1. Highlight [Stored Tracking] and push <EN-
TER>.
2. Highlight the stored tracked route and push <ENTER> . When the “ON” indicator is not
illuminated, push <ENTER>. The indicator
illuminates, and the Edit screen is displayed.
If <ENTER> is pushed while the “ON”
indicator is illuminated, the indicator turns
off.
2-84
Navigation

Black plate (111,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. Highlight the preferred item and push<ENTER> .
Available setting items (Current tracking)
. [View Track]:
Displays the tracked route up to the current
location.
. [Delete]:
Deletes the stored current tracking.
. [OK]:
Applies the settings.Available setting items (Stored tracked
routes)
.[View Track]:
Displays a stored tracked route on the map.
. [Rename]:
Changes the name.
“CHARACTER (letters and numbers)
INPUT SCREEN” page 1-16 .
[Replace]:
Overwrites the stored tracked route to the
current tracked route.
. [Delete]:
Deletes the stored tracked route.
. [OK]:
Applies the settings.
Displaying a tracked route:The stored tracked route can be displayed on
the map as necessary.1. Highlight [Stored Tracking] and push <EN-
TER>.
2. Highlight a tracked route to display on the map screen, and push <ENTER>.The
“ON” indicator illuminates, and the Edit
screen is displayed.
3. After confirming the location to display the tracked route, highlight [OK] and push
<ENTER> . The screen returns to the
previous screen.
4. Push <MAP>to return to the current
location map screen.
INFO:
. Current tracking is displayed up to 6
miles (10 km) .
. Stored tracking is displayed up to 12
miles (20 km) .
Navigation
2-85

Black plate (112,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Editing avoid area1. Highlight [Avoid Area] and push<ENTER>.
2. Highlight the preferred Avoid Area and push <ENTER> .3. Highlight the preferred items and push
<ENTER> .
Available setting items
. [Rename]:
Changes the name. .
[Move Location]:
Adjusts the location of the Avoid Area.
. [Resize Area]:
Adjusts the range of the Avoid Area.
. [FWY]:
Avoids freeways.
. [Delete]:
Deletes the Avoid Area.
. [OK]:
Applies the setting.
4. After finishing the setting, highlight [OK] and push <ENTER> .
INFO:
An Avoid Area can be added by selecting [Add
New].“STORING AVOID AREA” page 2-76
Rename:Changes the name of an Avoid Area.1. Highlight [Rename] and push <ENTER>.A
character input screen is displayed.
2. Enter the preferred name for the avoid area.
3. Highlight [OK] and push <ENTER>. The
name is stored.
2-86
Navigation