display NISSAN GT-R 2011 Owners Manual

Black plate (233,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Command ListNavigation Command:CommandAction
Home Sets a route to your home location.
Address Sets a route to the street address that you specify (for continental U.S. and Canada only) .
Places Sets a route to a facility near the current vehicle location.
Address Book Sets a route to a location stored in the Address Book.
Previous Destinations Sets a route to a previously entered destination.
Previous Start Point Sets a route to the previous starting point.
Minimize Freeway Route Sets the route search condition to minimize the usage of freeways.
Fastest Route Sets the route search condition to find the fastest time.
Shortest Route Sets the route search condition to find the shortest distance.
Cancel Route Stops the current route but can be resumed by using <ROUTE VOICE>.
Delete Destination Deletes the entire route (destination and waypoints) .
Birdview Map Displays the map in Birdview
TM
(3D) .
Planview Map Displays the map in Plan View (2D) .
North Up Locks the map to make North always point up.
Heading Up Locks the vehicle indicator to make it always point up.
Zoom In <1 to 13> Increases the magnification of the map by the number of steps specified.
Zoom Out <1 to 13> Decreases the magnification of the map by the number of steps specified.
Voice Guidance On/Off Turns the navigation guidance on and off.
Guidance Voice Repeat Speaks the current navigation guidance.
Voice recognition
8-15

Black plate (234,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
The words in italics are variable.
Information Command:Command Action
Fuel Economy Displays fuel economy information.
Tire Pressure Displays tire pressure information.
Maintenance Displays maintenance information.
Where am I? Displays the current location.
Traffic Information Turns the traffic information system on or off.
Weather Information Displays weather information.
Weather Map Displays the weather map.Vehicle Phone Command:CommandAction
Dial Number Makes a call to a spoken phone number.
Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.
Handset Phonebook Makes a call to a contact that is stored in the mobile phone.
Call History Incoming Calls Makes a call to the incoming call number.
Outgoing Calls Makes a call to the dialed number.
Missed Calls Makes a call to the Missed calls number.
International Call Makes an international call by allowing more than 10 digits to be spoken.8-16
Voice recognition

Black plate (236,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Help Command:CommandAction
Navigation Commands Displays the navigation command list.
Phone Commands Displays the phone command list.
Audio Commands Displays the audio command list.
Information Commands Displays the information command list.
Help Commands Displays the help command list.
User Guide Displays the User Guide
Speaker Adaptation The system memorizes the voices of up to three persons for better voice recognition performance.8-18
Voice recognition

Black plate (237,1)
Model "R35-N" EDITED: 2009/ 10/ 30
CONFIRMING HOW TO USE VOICE
COMMANDSIt is possible to confirm how to use voice
commands by accessing a simplified User
Guide, which contains basic instructions and
tutorials for several voice commands.Basic operation1. Push<INFO>.
2. Highlight [Others] and push <ENTER>.
3. Highlight [Voice Recognition] and push <ENTER> .
4. Highlight [User Guide] and push <EN-
TER>.
5. Highlight the preferred item and push <ENTER> . Available items
.
[Getting Started]:
Describes the basics of how to operate the
voice recognition system.
. [Let’s Practice]:
Mode for practice following the system
voice.
. [Using the Address Book]:
Tutorial for setting a destination by the
Address Book.
. [Finding a Street Address]:
Tutorial for entering a destination by street
address.
. [Placing Calls]:
Tutorial for marking a phone call by voice
command operation.
. [Help on Speaking]:
Displays the useful tips of speaking for
correct command recognition by the system.
. [Voice Recognition Settings]:
Describes the available voice recognition
settings.
. [Adapting the System to Your Voice]:
Tutorial adapting the system to the user’s
voice.
Getting StartedBefore using the voice recognition system for
the first time, it is possible to confirm how to use
commands by viewing the Getting Started
section of the User Guide.1. Highlight [Getting Started] and push <EN-
TER>.
2. To confirm the page, scroll the screen using the up and down switches of the main
directional buttons or the center dial.
Voice recognition
8-19

Black plate (238,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Practicing voice commandsPractice for using the voice recognition function
can be performed by repeating a phrase after
the system announces it.1. Highlight [Let’s Practice] and push<EN-
TER>.
2. Practice voice commands in accordance with the audio guidance.Tutorials on operation of voice re-
cognition systemWhen highlighting [Using the Address Book],
[Finding a Street Address] or [Placing Calls], the
system displays tutorials on how to perform
these operations using voice recognition.
Example: With [Using the Address Book] high-
lighted
1. Highlight [Using the Address Book] andpush <ENTER> . The tutorial starts.2. The voice guide demonstrates how to speak
when giving commands.
3. When the tutorial is completed, the system automatically switches to the Menu screen.
Useful tips for correct operationIt is possible to display useful speaking tips that
may help the system to accept a voice command
correctly.1. Highlight [Help on Speaking] and push<ENTER> .
2. To confirm the page, scroll the screen using the up and down switches of the main
directional buttons or the center dial.Voice recognition settingsThe settings for easy operation of the voice
recognition system are displayed.
8-20
Voice recognition

Black plate (239,1)
Model "R35-N" EDITED: 2009/ 10/ 30
1. Highlight [Voice Recognition Settings] andpush <ENTER> .
2. To confirm the page, scroll the screen using the up and down switches of the main
directional buttons or the center dial.Adapting Voice Recognition System
to Your VoiceThe voice recognition system is equipped with a
learning function to adapt to the user’s voice for
better recognition. It is possible to confirm how
to operate the learning function through this
tutorial.
1. Highlight [Adapting the System to YourVoice] and push <ENTER>. The tutorial
starts.2. The voice guide demonstrates the steps that have to be performed.
3. When the tutorial is completed, the system automatically switches to the Menu screen.
USING VOICE RECOGNITION SYS-
TEM
InitializationWhen the ignition switch is pushed to the ON
position, Voice Recognition is initialized, which
takes a few seconds. When completed, the
system is ready to accept voice commands. If
<
>is pushed before the initialization
completes, the display will show the message:
“System not ready”.
BEFORE STARTINGTo get the best recognition performance out of
Voice Recognition, observe the following:
. The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surrounding noises (traffic noise and
vibration sounds, etc.) , which may prevent
the system from correctly recognizing the
voice commands.
. Wait until the tone sounds before speaking a
command.
. Speak in a natural conversational voice
without pausing between words.
Voice recognition
8-21

Black plate (241,1)
Model "R35-N" EDITED: 2009/ 10/ 30
and the system announcement mode
switches to the short mode.
5. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
SETTING ALTERNATE COMMAND
MODEThis mode enables the operation of the display
and audio through Voice Recognition. When this
mode is active, an expanded list of commands
can be spoken after pushing <
>, and the
voice command menu prompts are turned off.
Note that in this mode the recognition success
rate may be affected because the number of
available commands and ways of speaking each
command are increased.
This mode can be turned on or off.
How to set1. Push <SETTING> .
2. Highlight [Others] and push <ENTER>.
3. Highlight [Voice Recognition] and push <ENTER> .
4. Highlight [Alternate Command Mode] and
push <ENTER> . A confirmation message is
displayed. Highlight [Yes] and push <EN-
TER>. The indicator illuminates, and Alter-
nate Command Mode switches to ON.
5. Push <
>to return to the previous
screen. Push <MAP>to return to the
current location map screen.
SPEAKER ADAPTATIONThe voice recognition system has a function to
learn the user’s voice for better voice recognition
performance.
The system can memorize the voices of up to
three persons.Having system learn user’s voice1. Push <SETTING> .
2. Highlight [Others] and push <ENTER>.
3. Highlight [Voice Recognition] and push <ENTER> .4. Highlight [Speaker Adaptation] and push
<ENTER> .
Voice recognition
8-23

Black plate (244,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Example 1: Switching map to 2D
(Plan View) mode1. Push<
>located on the steering wheel.
2. The system announces, “Please say a command”.
3. After the tone sounds and the icon on the screen changes from [
]to[
], speak
“Plan View Map”.
4. Voice feedback will be provided when the command is accepted, and the map is displayed in 2D (Plan View) .
Example 2: Setting destination
using places list1. Push
<
>located on the steering wheel.
2. The system announces, “Please say a command”.
3. After the tone sounds and the icon on the screen changes from [
]to[
], speak
“Places”.
4. If a route is already set, choose “Near Current Location”, “Along Route” or “Near
Destination”.
5. After the tone sounds and the icon on the screen changes again, speak “Along Route”.6. Voice feedback will be provided when thecommand is accepted, and the list of places
of interest categories appears.
7. After the tone sounds and the icon on the screen changes again, speak “Two”.
8-26
Voice recognition

Black plate (250,1)
Model "R35-N" EDITED: 2009/ 10/ 30
The multi function meter allows you to see the
vehicle status and the results of driving opera-
tion.
SAFETY NOTESFor your driving safety please read the following
warnings.
WARNING
.Use the information from the multi
function meter strictly as a refer-
ence to make your driving more
comfortable. The readings are not
meant to prevent accidents caused
by reckless driving or poor driving
conditions (due to weather, road
condition, etc.) . Always obey all
traffic regulations and posted speed
limits.
. Operating the multi function meter
while driving can lead to a crash
resulting in serious injuries or
death. Always park the vehicle in a
safe place before operating the dis-
play screen.
. Look at the display screen only
briefly while driving. Keep your eyes
on the road. Inattentive driving may
lead to a crash resulting in serious
injuries or death.
INFO:
. The information displayed on the multi
function meter is for reference purposes
only. Due to road conditions and tempera-
ture, the information displayed by the system
may vary from actual driving conditions.
. You can select the units that the multi
function meter displays.“LANGUAGE AND UNIT SETTINGS”
page 7-9
9-2
Multi function meter
ABOUT MULTI FUNCTION METER

Black plate (251,1)
Model "R35-N" EDITED: 2009/ 10/ 30
MULTI FUNCTION METER LISTThe following information can be displayed on
the multi function meter.Performance and vehicle informa-
tionThe driver can select up to six different meters to
be displayed.
Information for improving driving
smoothness
WARNING
Use the information from the multi
function meter strictly as a reference
to make your driving more comfortable.
The readings are not meant to prevent
accidents caused by reckless driving or
poor driving conditions (due to weather,
road condition, etc.) . Always obey all
traffic regulations and posted speed
limits.Acceleration:Displays the accelerator pedal position, boost
pressure and the g-force being exerted on the
vehicle.
Braking:Displays the brake pedal position, vehicle speed
and the g-force being exerted on the vehicle.Steering:Displays the steering angle, vehicle speed and
the g-force being exerted on the vehicle.
Multi function meter
9-3