navigation NISSAN GT-R 2013 R35 Multi Function Display Owners Manual

2-82Navigation
1. Highlight [Direction] and push<ENTER>.
A map screen with the home or stored
location located on the map center is
displayed.
2. Set the direction that sounds the alarm and push <ENTER>.
The selected direction is set.
INFO:
After the direction is set and [Direction] is
selected and set again, a confirmation message
is displayed. Confirm the contents of the
message, highlight [Yes] and push <ENTER>.
The set direction is overwritten.
Distance:
Sets the alarm to sound when reaching a
specific distance to the home or stored address.
1. Highlight [Distance] and push <ENTER>.
2. Highlight the preferred distance option and
push <ENTER>. The indicator of the
selected distance illuminates.
Available distance options:
. 150 feet (50 m)
. 300 feet (100 m)
. 1000 feet (300 m) .
1500 feet (500 m)
INFO:
Once the direction and the distance to sound an
alarm are set, the system will sound the alarm
when the vehicle enters the triggering zone.
Phone number:
Stores the telephone number of the home or a
stored location.
1. Highlight [Phone No.] and push <ENTER>.
The telephone number entry screen is
displayed.

2. Enter the telephone number of the home orstored location.
“Number input screen” (page 1-17)
3. Highlight [OK] and push <ENTER>.
The telephone number is stored.
INFO:
If the phone number of the home or a location is
stored, the phone number can be used to search
for the destination even if it is not included in the
map data.
Group (only for stored locations):
This groups the stored locations.
By grouping the stored locations, the [By Group]
option of the sort function can be used more
effectively in the [Sort Entries] mode.
1. Highlight [Group] and push <ENTER>.
2. Highlight the preferred group and push
<ENTER>.
When the indicator of the selected group
illuminates, the stored location is classified
into the applicable group.
Entry Numbers (only for stored locations):
Index the position numbers of any two stored
locations in the list.
1. Highlight [Entry Numbers] and push <ENTER>.
A list of stored locations is displayed.
2. Highlight the stored addresses that youwant to change and push <ENTER>.
The position numbers of the selected stored
locations are changed.
Navigation2-83

2-84Navigation
Editing stored route
1. Highlight [Stored Routes] and push<ENTER>.
2. Highlight the preferred stored route and push <ENTER>.
3. Highlight the preferred item to edit from the
list on the right side of the screen and push
<ENTER>.
4. After finishing the editing, highlight [OK] and push <ENTER>.
INFO:
If [Store Current Route] is selected, the system
stores the current route.
Available setting items
. [Rename]:
Changes the name.
“Character (letters and numbers) input
screen” (page 1-16)
. [Replace]:
Overwrites the stored route to the current
route.
. [Delete]:
Deletes the stored route.
. [OK]:
Applies the settings.
Editing stored tracking
1. Highlight [Stored Tracking] and push
<ENTER>.
2. Highlight the stored tracked route and push <ENTER>. When the “ON” indicator is not
illuminated, push <ENTER>. The indicator
illuminates, and the Edit screen is displayed.
If <ENTER> is pushed while the “ON”
indicator is illuminated, the indicator turns
off.

3. Highlight the preferred item and push<ENTER>.
Available setting items (Current tracking)
. [View Track]:
Displays the tracked route up to the current
location.
. [Delete]:
Deletes the stored current tracking.
. [OK]:
Applies the settings.
Available setting items (Stored tracked
routes)
.[View Track]:
Displays a stored tracked route on the map.
. [Rename]:
Changes the name.
“Character (letters and numbers) input
screen” (page 1-16) .
[Replace]:
Overwrites the stored tracked route to the
current tracked route.
. [Delete]:
Deletes the stored tracked route.
. [OK]:
Applies the settings.
Displaying a tracked route:
The stored tracked route can be displayed on
the map as necessary.
1. Highlight [Stored Tracking] and push <ENTER>.
2. Highlight a tracked route to display on the map screen, and push <ENTER>. The
“ON” indicator illuminates, and the Edit
screen is displayed.
3. After confirming the location to display the tracked route, highlight [OK] and push
<ENTER>. The screen returns to the
previous screen.
4. Push <MAP>to return to the current
location map screen.
INFO:
.Current tracking is displayed up to 6
miles (10 km) .
.Stored tracking is displayed up to 12miles (20 km) .
Navigation2-85

2-86Navigation
Editing avoid area
1. Highlight [Avoid Area] and push<ENTER>.
2. Highlight the preferred Avoid Area and push <ENTER>.
3. Highlight the preferred items and push<ENTER>. Available setting items
.[Rename]:
Changes the name.
.[Move Location]:
Adjusts the location of the Avoid Area.
.[Resize Area]:Adjusts the range of the Avoid Area.
.[FWY]:Avoids freeways.
.[Delete]:Deletes the Avoid Area.
.[OK]:Applies the setting.
4. After finishing the setting, highlight [OK] and push <ENTER>.
INFO:
An Avoid Area can be added by selecting [Add
New].
“Storing avoid area” (page 2-77)
Rename:
Changes the name of an Avoid Area.
1. Highlight [Rename] and push <ENTER>.A
character input screen is displayed.
2. Enter the preferred name for the avoid area.
3. Highlight [OK] and push <ENTER>. The
name is stored.
Move Location:
Adjusts the location of the Avoid Area.
1. Highlight [Move Location] and push <ENTER>.

2. Adjust the location of the Avoid Area.
3. After adjusting the location, push<ENTER>.
Resize Area:
Adjusts the range of the Avoid Area.
1. Highlight [Resize Area] and push <ENTER>.
2. Highlight the range from 5 available levels.
3. After highlighting the range, push <ENTER>.
FWY:
Sets the route to avoid freeways.
1. Highlight [FWY]. To include freeways in the Avoid Area, push
<ENTER> to illuminate this indicator.
2. The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include a freeway.
INFO:
If the current vehicle location is set to an Avoid
Area, the system will not provide route guidance.
Delete:
Deletes the Avoid Area.
1. Highlight [Delete] and push <ENTER>.
2. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.
Navigation2-87

2-88Navigation
DELETING STORED ITEM
The locations and routes in the Address Book
can be deleted. Two deletion methods are
available: deleting an individual item and delet-
ing all stored items.
NOTICE
Deleted items cannot be restored. Be-
fore deleting an item, always make sure
that the item is truly not necessary.
Deleting stored item individually
You can delete stored addresses, routes, track-
ing and avoid areas individually.
1. Push<SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push
<ENTER>.
Example: [Stored Location] is highlighted.
4. Highlight the preferred item for deletion and push <ENTER>.
5. Highlight the preferred location/route for
deletion and push <ENTER>.
6. Highlight [Delete] and push <ENTER>.

7. A confirmation message is displayed. Con-firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored item
is deleted from the Address Book.
Other settings:
A stored address can also be deleted using the
following procedure.
1. Push <DEST>.
2. Highlight [Address Book] and push <ENTER>.
3. Highlight [Store/Edit] and push <ENTER>.
4. Highlight [Edit or Delete an Entry] and push <ENTER>.
5. Highlight a preferred address and push <ENTER>.
“Setting destination” (page 2-23)
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this proce-
dure.
Deleting individual item on map
1. Align the cross pointer over the preferred stored location for deletion by moving on the
map. Then push <ENTER>.
2. Highlight [Delete] and push <ENTER>.
3. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The stored item is deleted from the Address
Book.
Deleting all stored items
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
Navigation2-89

2-90Navigation
3. Highlight [Address Book] and push<ENTER>.
4. Highlight [Delete Stored Items] and push<ENTER>.
5. Highlight the preferred item for deletion and
push <ENTER>.
Items that can be deleted
.[Delete Home Location]: Deletes the home location.
.[Delete Address Book]:Deletes all stored locations.
.[Delete Stored Routes]:Deletes all stored routes.
.[Delete Current Tracking]:Deletes the current tracked route.
.[Delete Stored Tracking]:
Deletes all stored tracked routes.
.[Delete Avoid Areas]:Deletes all stored Avoid Areas.
.[Delete Stored Voicetags]:
Deletes all stored Voicetags.
.[Delete Previous Destinations]:Deletes all or one of the previous
destinations.
.[Delete Previous Start Point]:Deletes all previous start points.
.[Delete Learned Route]:
Deletes all system learned routes.
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The stored items
are deleted from the Address Book.
Other settings:
All stored addresses can also be deleted using
the following procedure.
1. Push <DEST>.
2. Highlight [Address Book] and push <ENTER>.

3. Highlight [Store/Edit] and push<ENTER>.
4. Highlight [Delete All Addressbook Entries] and push <ENTER>.
“Setting destination” (page 2-23)
INFO:
This procedure applies only for deleting a stored
home or address. A stored route, tracking or
avoid area cannot be deleted using this proce-
dure.
TRANSFERRING INFORMATION TO/
FROM ADDRESS BOOK
The information of the stored home and ad-
dresses can be exported and imported using a
USB memory.
1. Insert a USB memory and push <SETTING>.
INFO:
Refer to the vehicle Owner’s Manual for the
location of the USB connector.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push
<ENTER>.
4. Highlight [Transfer Address Book] and push<ENTER>.
5. Highlight [Download Address Book to USB] or [Download Address Book from USB] and
push <ENTER>.
6. Highlight a stored item. The [ON] indicator
illuminates.
Navigation2-91