display NISSAN PATHFINDER 2012 R52 / 4.G 06IT Navigation Manual

4. Highlight [Auto Reroute] and push<ENTER> . The indicator for the selected
condition illuminates. When the current
location map screen or route setting screen
is displayed, the system recalculates a route
with the set conditions.
“Detailed route settings” (page 5-14)
SETTING A DETOUR ROUTE
If you want to detour from the suggested route,
you can calculate a route detouring for a
specified distance.
1. Push <ROUTE> .
2. Highlight [Detour] and push <ENTER>.
3. Highlight a detour distance and push
<ENTER> .
After calculating the detour, the system displays
the detour route on the map.
INFO:
. When the vehicle has deviated from the
suggested route, [Detour] cannot be se- lected.
. If the system cannot calculate a detour with
the specified conditions, it displays the
previous suggested route.
. If the vehicle is traveling very fast, the detour
route may start from a location that the
vehicle has already passed.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command.
To set a detour route:
“Detour” (Alternate command mode)
ROUTE GUIDANCE SETTINGS
You can set various guidance information to be
displayed during route guidance and activate or
deactivate route and/or voice guidance.
Route guidance5-17

Basic operation
1. Push<ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight the preferred item and push <ENTER> .
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
. Guidance Screen Default:
Sets the default display screen for route
guidance.
“Visual guidance settings” (page 5-
18)
. Route Guidance:
Activates or deactivates route guidance.
Route guidance is activated when the
indicator illuminates. Route information is
not available when route guidance is set to
OFF.
. Guidance Voice:
Activates or deactivates voice guidance. The
indicator illuminates if voice guidance is
activated.
. Traffic Info. Settings:
Allows you to apply settings such as performing a route search with traffic
information taken into consideration.
. Estimated Travel Time:
Switches the display of estimated travel time
to the destination or waypoint that is
displayed on the map screen.
. Exit Info. on Turn List:
Sets the information icon displayed in the
turn list to ON/OFF.
. Turning Point Sound:
Sets the guide point sound to ON/OFF.
. Small Turn Arrow on Map:
Activates or deactivates the Small Turn
Arrow on Map (simplified turn indicator)
displayed in the upper left corner of the map
screen. The indicator illuminates if the Small
Turn Arrow on Map is displayed.
. Voice Announcements:
Sets how many times voice guidance is
repeated for guide points.
“Voice guidance settings” (page 5-
21)
. Set Average Speeds:
Allows you to set an average vehicle speed
for each type of road, which is reflected in
the calculation of the required time to the
destination.
“Set average speeds” (page 5-22)
Visual guidance settings
The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. You can choose which
screen is to be displayed.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Guidance Screen Default] and push <ENTER> .
4. The indicator of the selected type of guidance illuminates.
5-18Route guidance

Intersection Map:
The map screen and the enlarged intersection
view can be displayed at the same time.
INFO:
Push <MAP> to switch to the full map screen.
Turn list:
The list screen for showing the guide points to
the destination and the map screen can be
displayed at the same time. An enlarged intersection view is automatically displayed
when the vehicle approaches the guide point.
INFO:
. Turn list can be scrolled using the center dial
or the main directional buttons.
. Push <MAP> to switch to the full map
screen. Push <MAP>again to display the
turn list. When approaching a guide point,
the enlarged view of the intersection is
automatically displayed. To display the turn
list, push <MAP>. To display the map
screen, push <MAP>again.
Map:
The current location map is displayed. An
enlarged intersection view is automatically dis-
played when the vehicle approaches the guide
point.
INFO:
When an enlarged intersection view is dis-
played, you can return to the map screen by
pushing <MAP>.
Switching of required time display
The display of the travel time on the map screen
can be switched between the travel time to the
destination and the travel time to the waypoint.
Example: Switching the display to the travel time
to the waypoint
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Estimated Travel Time] and push <ENTER> .
Route guidance5-19

4. Push the left or right directional buttons toswitch from “Dest.” to “Waypoint”.
5. Push <MAP>to return to the current
location map screen.
6. The icon displayed on the map screen is switched, and the travel time to the waypoint
is displayed.
Displayed icon
: Display of the travel time to thedestination
: Display of the travel time to the
waypoint
Deactivating the information icon display
in the turn list
The display of information icons in the turn list
including the highway exits, junctions, and rest
areas can be deactivated.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> .
3. Highlight [Exit Info. on Turn List] and push <ENTER> to turn off the indicator.
4. Push <MAP>to return to the current
location map screen.
5. The information icon display in the turn list is
now deactivated.
Selecting a waypoint from the turn list:
When [Exit info. on Turn List] is set to on, you
can set a waypoint to a facility located near the
freeway exit.
1. Highlight the exit where the traffic informa- tion icon is displayed, and push <ENTER>.
The category list screen is displayed.
5-20Route guidance

2. Highlight the landmark category and push<ENTER> . The list screen for showing
facilities located near the freeway exit is
displayed.
3. Highlight the preferred facility for the way- point and push <ENTER>.
4. The waypoint is set, and the route search is
performed.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice guidance settings
You can set how many times voice guidance is
repeated.
1. Push <ROUTE> .
2. Highlight [Guidance Settings] and push <ENTER> . 3. Highlight [Voice Announcements] and push
<ENTER> .
4. Highlight [Twice] or [Three Times] and push
<ENTER> . The indicator for the selected
number of repetitions illuminates.
5. Push <MAP>to return to the current
location map screen.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command. . To turn on voice guidance:
“Guidance Voice” (Alternate command
mode)
. To repeat voice guidance once:
“Guidance Voice Repeat” (Alternate com-
mand mode)
Route guidance5-21

GUIDANCE SCREENS AND PREVIEW
MODE
Route guidance displays map screens and
various information according to the situation.
When route guidance starts, the Small Turn
Arrow on Map is displayed in the upper left
corner of the map screen. This arrow indicates
the turning direction at the next guide point
(corner or intersection) . The distance is also
displayed. At the top of the screen, the distance
to the next guide point and the name of the next
street to turn on to are displayed. Also, there
may be cases that next street names are
announced. The Small Turn Arrow on Map can
be enabled or disabled by the user.
“ROUTE GUIDANCE SETTINGS” (page
5-17)
Enlarged intersection view
When approaching a guide point, the system
automatically changes to the split screen and
shows an enlarged view of the intersection in the
left screen. After passing through the intersec-
tion, the system automatically returns to the full
screen mode. To switch to the full screen mode
while the enlarged intersection view is dis-
played, push<MAP>. Pushing <MAP>again
displays the enlarged intersection view.
Junction guidance
While driving on a freeway, when the vehicle is
approximately 1 mile (approximately 2 km) from a
junction, the system automatically switches to
the split screen and displays an enlarged view of
the junction (3D) in the left screen. After passing
the junction, the system automatically returns to
the full screen mode. To switch to the full screen
mode while the enlarged junction view is
displayed, push <MAP>.
5-24Route guidance

Turn list
Depending on the setting, the system can
constantly display the split screen and show
the turn list in the left screen. When approaching
a guide point, the left screen automatically
switches to an enlarged view of the intersection.
To switch to the full screen mode, push
<MAP>. Pushing<MAP>again displays the
turn list. When approaching a guide point, the
enlarged view of the intersection is automatically
displayed. To display the turn list, push <MAP>.
To display the map screen, push <MAP>again.
“ROUTE GUIDANCE SETTINGS” (page
5-17)
Route guidance5-25

7. When your preferred location is displayed atthe center of the map, confirm the location
and push <ENTER> .
A message is displayed, and the location is
stored in the Address Book.
INFO:
.When you store the location from the
Address Book, you cannot use [Address
Book] to search for the location.
.You can adjust a location by selecting
[Move Location] using the same method
as the one for a destination.
“ADJUSTING THE LOCATION
OF THE DESTINATION” (page 4-
25)
8. Adjust the location of the stored item and
edit the contents of the stored item as
necessary. After finishing the setting, high-
light [OK] and push <ENTER>.
STORING THE CURRENT VEHICLE
LOCATION
1. Push<MAP>to display the current loca-
tion map screen.
2. Push <ENTER> at the current vehicle
location.
3. Highlight [Store Location] and push
<ENTER> . A message is displayed, and
the current vehicle location is stored in the
Address Book.
4. Push <MAP>or<BACK> to return to the
current location map screen. The icon
representing the stored location is displayed
on the map.
Storing a location/route6-3

INFO:
The location is stored in the first available
position number in the Address Book list.
Voice command
1. Push <TALK> located on the steering
switch.
2. After the tone sounds, speak a command.
To store a current location:
“Store Location” (Alternate command mode)
STORING A LOCATION BY MOVING
THE MAP
1. Move to the preferred location on the map and push <ENTER> .
2. Highlight [Store Location] and push
<ENTER> . A message is displayed, and
the location is stored in the Address Book.
3. Push <MAP>to return to the current
location map screen. The icon representing
the stored location is displayed on the map.
INFO:
The location is stored in the first available
position number in the Address Book list. A calculated route can be stored.
A maximum of 5 routes can be stored.
Stored routes can be easily retrieved and set as
the suggested route.
INFO:
Stored route includes only locations (destination
and waypoints) and route calculation conditions,
not the route itself.
1. Push <ROUTE> .
2. Highlight [Route Information] and push
<ENTER> .
STORING A ROUTE
6-4Storing a location/route

3. Highlight [Store Route] and push<ENTER> .
4. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
OTHER SETTINGS
You can also store a route using the following
procedure.
1) Push <SETTING> .
2) Highlight [Navigation] and push <ENTER>.
3) Highlight [Address Book] and push <ENTER> .
4) Highlight [Stored Routes] and push <ENTER> .
5) Highlight [None (Add New)] and push <ENTER> .
6) A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored. When
5 routes are stored in the Address Book, a
new route cannot be stored until a route is
deleted.
“DELETING A STORED ITEM” (page
6-20)
. If you have not set any waypoints on the
route, the route cannot be stored.
Storing a location/route6-5