NISSAN TEANA 2008 Service Manual

TM-288
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
6
Slips/Will
Not EngageDoes not lock-up.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve
7Does not hold lock-up
condition.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-289
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
8
Slips/Will
Not EngageLock-up is not re-
leased.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
OFF vehicle8. Torque converterTM-3359. Oil pump assembly
TM-332
10. Control valve
9With selector lever in
“D” position, accelera-
tion is extremely poor.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Stall testTM-306
4. Accelerator pedal position sensorTM-252
5. CAN communication lineTM-208
6. PNP switchTM-213
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. Secondary pressure sensorTM-242
13. CVT fluid temperature sensorTM-216
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-33516. Oil pump assembly
TM-332
17. Forward clutch
18. Control valve No
.Item Symptom Condition Diagnostic Item Reference

TM-290
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
10
Slips/Will
Not EngageWith selector lever in
“R” position, accelera-
tion is extremely poor.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Stall testTM-306
4. Accelerator pedal position sensorTM-252
5. CAN communication lineTM-208
6. PNP switchTM-213
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. Secondary pressure sensorTM-242
13. CVT fluid temperature sensorTM-216
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-33516. Oil pump assembly
TM-332
17. Reverse brake
18. Control valve
11 S l i p s a t l o c k - u p .ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Engine speed signalTM-226
4. Primary speed sensorTM-218
5. Torque converter clutch solenoid valveTM-230
6. CAN communication lineTM-208
7. Stall testTM-306
8. Step motorTM-261
9. PNP switchTM-213
10. Lock-up select solenoid valveTM-258
11. CVT fluid temperature sensorTM-216
12. Secondary speed sensorTM-222
13. Secondary pressure sensorTM-242
OFF vehicle14. Torque converterTM-33515. Oil pump assembly
TM-332
16. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-291
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
12
OthersNo creep at all.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Accelerator pedal position sensorTM-252
4. PNP switchTM-213
5. CAN communication lineTM-208
6. Stall testTM-306
7. CVT positionTM-314
8. Step motorTM-261
9. Primary speed sensorTM-218
10. Secondary speed sensorTM-222
11. Accelerator pedal position sensorTM-252
12. CVT fluid temperature sensorTM-216
13. Secondary pressure sensorTM-242
14. Power supplyTM-249
OFF vehicle15. Torque converterTM-335
16. Oil pump assembly
TM-332
17. Gear system
18. Forward clutch
19. Reverse brake
20. Control valve
13Vehicle cannot run in
all positions.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Forward clutch
17. Reverse brake
18. Control valve
19. Parking components No
.Item Symptom Condition Diagnostic Item Reference

TM-292
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
14
OthersWith selector lever in
“D” position, driving is
not possible.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Forward clutch
17. Control valve
18. Parking components
15With selector lever in
“R” position, driving is
not possible.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. PNP switchTM-213
4. Stall testTM-306
5. CVT positionTM-314
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Accelerator pedal position sensorTM-252
10. CVT fluid temperature sensorTM-216
11. Secondary pressure sensorTM-242
12. Power supplyTM-249
OFF vehicle13. Torque converterTM-335
14. Oil pump assembly
TM-332
15. Gear system
16. Reverse brake
17. Control valve
18. Parking components No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-293
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
16
OthersJudder occurs during
lock-up.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Secondary speed sensorTM-222
5. Accelerator pedal position sensorTM-252
6. CAN communication lineTM-208
7. Torque converter clutch solenoid valveTM-230
OFF vehicle8. Torque converterTM-3359. Control valveTM-332
17Strange noise in “D”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-335
5. Oil pump assembly
TM-332
6. Gear system
7. Forward clutch
8. Control valve
9. Bearing
18Strange noise in “R”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-335
5. Oil pump assembly
TM-332
6. Gear system
7. Reverse brake
8. Control valve
19Strange noise in “N”
position.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. CAN communication lineTM-208
OFF vehicle4. Torque converterTM-3355. Oil pump assembly
TM-332
6. Gear system
7. Control valve No
.Item Symptom Condition Diagnostic Item Reference

TM-294
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
20
OthersVehicle does not de-
celerate by engine
brake.ON vehicle1. CVT fluid level and stateTM-304
2. CVT positionTM-314
3. CAN communication lineTM-208
4. Step motorTM-261
5. Primary speed sensorTM-218
6. Secondary speed sensorTM-222
7. Line pressure testTM-308
8. Engine speed signalTM-226
9. Accelerator pedal position sensorTM-252
OFF vehicle 10. Control valveTM-332
21 Maximum speed low.ON vehicle1. CVT fluid level and stateTM-304
2. Line pressure testTM-308
3. Accelerator pedal position sensorTM-252
4. CAN communication lineTM-208
5. Stall testTM-306
6. Step motorTM-261
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Secondary pressure sensorTM-242
10. CVT fluid temperature sensorTM-216
OFF vehicle11. Torque converterTM-335
12. Oil pump assembly
TM-332
13. Gear system
14. Forward clutch
15. Control valve
22With selector lever in
“P” position, vehicle
does not enter park-
ing condition or, with
selector lever in an-
other position, park-
ing condition is not
cancelled.ON vehicle1. PNP switchTM-213
2. CVT positionTM-314
OFF vehicle 3. Parking componentsTM-332
23Vehicle runs with CVT
in “P” position.ON vehicle1. PNP switchTM-213
2. CVT fluid level and stateTM-304
3. CVT positionTM-314
OFF vehicle4. Parking components
TM-3325. Gear system
6. Control valve No
.Item Symptom Condition Diagnostic Item Reference

SYSTEM SYMPTOM
TM-295
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
24
OthersVehicle runs with CVT
in “N” position.ON vehicle1. PNP switchTM-213
2. CVT fluid level and stateTM-304
3. CVT positionTM-314
OFF vehicle4. Gear system
TM-3325. Forward clutch
6. Reverse brake
7. Control valve
25 Engine stall.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Torque converter clutch solenoid valveTM-230
5. CAN communication lineTM-208
6. Stall testTM-306
7. Secondary pressure sensorTM-242
OFF vehicle8. Torque converterTM-3359. Control valveTM-332
26Engine stalls when
selector lever is shift-
ed “N”→“D” or “R”.ON vehicle1. CVT fluid level and stateTM-304
2. Engine speed signalTM-226
3. Primary speed sensorTM-218
4. Torque converter clutch solenoid valveTM-230
5. CAN communication lineTM-208
6. Stall testTM-306
OFF vehicle7. Torque converterTM-3358. Control valveTM-332
27Engine speed does
not return to idle.ON vehicle1. CVT fluid level and stateTM-304
2. Accelerator pedal position sensorTM-252
3. Secondary speed sensorTM-222
4. CAN communication lineTM-208
OFF vehicle 5. Control valveTM-332
28 CVT does not shift.ON vehicle1. CVT fluid level and stateTM-304
2. CVT positionTM-314
3. Line pressure testTM-308
4. Engine speed signalTM-226
5. Accelerator pedal position sensorTM-252
6. CAN communication lineTM-208
7. Primary speed sensorTM-218
8. Secondary speed sensorTM-222
9. Step motorTM-261
OFF vehicle10. Control valve
TM-33211. Oil pump assembly
29Engine does not start
in “N” or “P” position.ON vehicle1. Ignition switch and starterPG-55
,
STR-10
2. CVT positionTM-314
3. PNP switchTM-213
No
.Item Symptom Condition Diagnostic Item Reference

TM-296
< SYMPTOM DIAGNOSIS >[CVT: RE0F10A]
SYSTEM SYMPTOM
30
OthersEngine starts in posi-
tions other than “N” or
“P”.ON vehicle1. Ignition switch and starterPG-55
,
STR-10
2. CVT positionTM-314
3. PNP switchTM-213
31When brake pedal is
depressed with igni-
tion switch ON, selec-
tor lever cannot be
shifted from “P” posi-
tion to other position.ON vehicle1. Stop lamp switch
TM-267
2. Shift lock solenoid
3. Control device
32When brake pedal is
not depressed with ig-
nition switch ON, se-
lector lever can be
shifted from “P” posi-
tion to other position.ON vehicle1. Stop lamp switch
TM-267
2. Shift lock solenoid
3. Control device
33Cannot be changed to
sport mode.ON vehicle1. Sport mode switchTM-272
2. CAN communication lineTM-208
3. Combination metersMWI-42
33CVT indicator lamp is
not turned ON.ON vehicle1. CAN communication lineTM-2082. Combination metersMWI-42
3. TCM power supply and groundTM-249
No
.Item Symptom Condition Diagnostic Item Reference

PRECAUTIONS
TM-297
< PRECAUTION >[CVT: RE0F10A]
C
E
F
G
H
I
J
K
L
MA
B
TM
N
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000003901473
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIRBAG” and
“SEAT BELT” of this Service Manual.
WARNING:
 To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
 Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIRBAG”.
 Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
INFOID:0000000003901477
NOTE:
 Before removing and installing any control units, first turn the push-button ignition switch to the LOCK posi-
tion, then disconnect both battery cables.
 After finishing work, confirm that all control unit connectors are connected properly, then re-connect both
battery cables.
 Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.
This vehicle is equipped with a push-button ignition switch and a steering lock unit.
If the battery is disconnected or discharged, the steering wheel will lock and cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the procedure
below before starting the repair operation.
OPERATION PROCEDURE
1. Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2. Turn the push-button ignition switch to ACC position.
(At this time, the steering lock will be released.)
3. Disconnect both battery cables. The steering lock will remain released with both battery cables discon-
nected and the steering wheel can be turned.
4. Perform the necessary repair operation.
5. When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)
6. Perform self-diagnosis check of all control units using CONSULT-III.