set clock RENAULT ALASKAN 2017 User Guide

2. Turn the
<MENU> dial clockwise or anticlock-
wise, the display will appear in the following or-
der:
[Audio] ⇔[Clock] ⇔[Radio] ⇔[Language]
After the desired levels have been set, press either
the (Back) button repeatedly, or the
<SETUP>
button.
Audio adjustments
1. Press the <SETUP>button to enter the setup
menu screen then select [Audio].
2. Turn the <MENU>dial clockwise or anticlock-
wise, the display will appear in the following or-
der:
[Sound] →[AUX in] →[Speed Volume] →[Bass
Boost] →[Audio Default] [Sound] menu:
Submenus in the sound menu:
[Bass] Use this control to enhance or attenuate bass response sound.
Turn the<MENU> dial clockwise
or anticlockwise to adjust the bass
settings then press <ENTER>to
confirm.
[Treble] Use this control to enhance or attenuate the treble.
Turn the<MENU> dial clockwise
or anticlockwise to adjust the
treble settings then press
<ENTER> to confirm.
[Balance] Use this control to adjust the bal- ance of the volume between the
left and right speakers.
Turn the<MENU> dial
anticlockwise or clockwise to
adjust the left/right balance then
press <ENTER> to confirm.
[Fade] Use this control to adjust the bal- ance of the volume between the
front and rear speakers.
Turn the<MENU> dial
anticlockwise or clockwise to
adjust the front/rear balance then
press <ENTER> to confirm. [AUX in] menu:
Use this control to adjust the volume output from the
auxiliary source.
Turn the
<MENU> dial anticlockwise or clockwise
to select [Low], [Medium], or [High] mode then
press <ENTER> to confirm.
[Speed Volume] menu:
This mode controls the volume output from the
speakers automatically in relation to vehicle speed.
When [Speed Volume] is displayed, turn the
<MENU> dial clockwise or anticlockwise to adjust
the volume level.
Adjusting the setting to 0(zero) turns off the speed
volume feature. Increasing the speed volume setting
results in the audio volume increasing more rapidly
with vehicle speed. Once chosen, press <ENTER>
to save the setting.
[Bass Boost] menu:
Switch [Bass boost] [ON] or [OFF]
[Audio default] menu:
The audio unit has asaved preset settings as afac-
tory default. Select [Yes] to change all settings back
to the factory preset settings. Select [No] to exit the
menu keeping the current settings.
Setting the clock
The clock menu screen set up screen will appear
when selecting the [Clock] item from the set up
menu.
4-40 Display screen, heater and air conditioner, and audio system

[Set Time]:
Select [Set Time] then adjust the clock as follows:
1. The hour display will start flashing. Turn the <MENU> dial to adjust the hour.
2. Press the <ENTER>button. The minute display
will start flashing.
3. Turn the <MENU>dial to adjust the minute.
4. Press <ENTER> to finish the clock adjustment.
[On/Off]:
Set the clock display between on or off when the
audio unit is turned off.
If set in the [ON] position, the clock will be dis-
played when the audio unit is turned off either by
pressing the button or when the ignition switch
is placed in the “OFF” position.
[Format]:
Set the clock display between 24-hour mode and
12-hour clock mode. [Radio] menu
For activation or deactivation details, see “SETUP
button” earlier in this section. [TA] Use this control to switch Traffic Announcements on or off when
the unit starts.
Turn the <MENU> dial clockwise
or anticlockwise to select then
press <ENTER> to confirm.
[DR Inter-
rupt{] For models fitted with DAB
(Digital Audio Broadcasting)
functionality only.
Switch on or off specific listed
Digital Interruptions. When
selected the DAB radio stations
will be interrupted if
aspecific
message is available.
Turn the <MENU> dial clockwise
or anticlockwise to adjust then
press <ENTER> to select.
[Ref. FM
List] Manually update the FM station
list
Press the
<ENTER> to start the
search of the stations. The text
[Updating FM list...] appears. In a
short period of time the stations
are updated and the last station (if
possible) starts playing.
Language settings
Select the appropriate language and press the
<ENTER> button. Upon completion, the screen will
automatically adapt the language setting. •
[Chinese]
• [Chinese Simplified]
• [Deutsch]
• [Español]
• [Français]
• [Korean]
• [Italiano]
• [Nederlands]
• [Polski]
• [Português]
• [Türkçe]
• [UK English]
• [русский]
COMPACT DISC (CD) OPERATION
The CD player can play amusic CD or an encoded
MP3/WMA CD and while listening to those CD’s
music information tags (track and artist information)
can be displayed (when CD encoded with text is
being used).
Press the <MEDIA> button and the CD (if loaded)
will start to play.
When <MEDIA> is pressed and the radio or another
source mode is already operating, it will automati-
cally turn off the playing source and the CD play
mode will start.
Display screen, heater and air conditioner, and audio system 4-41

Receiving
acall
When receiving an incoming call, the display will
show the caller’s phone number (or anotification
message that the caller’s phone number cannot be
shown) and three operation icons.
1. Answering and during acall:
Answer the call by pressing <ENTER>(the is
highlighted).
By pressing
<ENTER>,y ou can select the following
options:
• Ending the call by selecting and press
<ENTER>.
• Put the call on hold by selecting and press
<ENTER>.
• [ ]
Use this item (the transfer handset command) to
transfer the call from the audio system to your
mobile phone.
To transfer the call back to hands-free via the
audio system select [ ].•
[#123]
Use this item to enter numbers during
acall. For
example, if directed by an automated phone sys-
tem to dial an extension number the system will
send the tone associated with the selected num-
ber.
2. Put acall on hold:
Rotate the <MENU>dial until is highlighted,
press <ENTER>.T he call is on hold. Pressing
<ENTER> accepts the call, rotate the <MENU>dial
clockwise and press <ENTER>to reject.
3. Rejecting acall:
Rotate the <MENU>dial until is highlighted,
press <ENTER>.T he call is rejected.
Initiating acall
Ac all can be initiated using one of the following
methods:
–M aking acall from the phone book
–M anually dialling aphone number
–R edialling
–U sing call history (Call List menu)
• Dialled
• Received •
Missed
Making acall from the phone book:
Once the Bluetooth
®connection has been made,
between the registered mobile phone and the audio
system, phone book data will be transferred auto-
matically to the audio system. The transfer may take
aw hile before completion.
NOTE
Phone book data will be erased when:
• Switching to another registered mobile
phone.
• Mobile phone is disconnected.
• The registered mobile phone is deleted from
the audio system.
1. Press < >
.
2. Turn the <MENU>dial and scroll down to [Phone
Book] then press <ENTER>.
3. Scroll down through the list, select the appropri- ate contact name (highlighted), and press
<ENTER>.
4. Afollowing screen will show the number to be
dialled. If correct, press <ENTER>again to dial
the number.
If the contact has more numbers assigned for (home), (mobile), or
(office), scroll,
and select the appropriate number to dial. 4-62
Display screen, heater and air conditioner, and audio system

To initiate TPMS temperature calibration use the
steering wheel switches to select the [Settings]
menu, followed by [Tyre Pressures]. Select [Cali-
brate] followed by [Start]. While the calibration pro-
cess is active, the message: [Resetting tyre pres-
sure system] will be displayed in the vehicle informa-
tion display. WARNING
Never remove the key or turn the ignition switch
to the <LOCK> position while driving. The steer-
ing wheel will lock. This will cause the driver to
lose control of the vehicle and could result in
serious vehicle damage or personal injury.
MANUAL TRANSMISSION (MT)
The switch includes an anti-theft steering lock de-
vice.
The ignition key can only be removed when theswitch is in the <LOCK> normal parking position
(0).
There is an “OFF” position ➀in between <LOCK>
and <ACC>, although it does not show on the lock
cylinder.
To lock the steering wheel, remove the key. To
unlock the steering wheel, insert the key and turn
it gently while rotating the steering wheel slightly
right and left. KEY POSITIONS
LOCK (Normal parking position) (0):
The ignition key can only be removed at this posi-
tion.
OFF (1):
The engine can be turned off without locking the
steering wheel.
ACC (Accessories) (2):
This position activates electrical accessories such
as the radio when the engine is not running.
ON (Normal operating position) (3):
This position turns on the ignition system and elec-
trical accessories.
START (4):
This position starts the engine. As soon as the en-
gine has started, release the key immediately. It will
automatically return to the <ON> position.
STEERING LOCK
Locking the steering wheel
1) Place the ignition switch in the <LOCK> posi-
tion.
2) Remove the key from the ignition switch.
3) Turn the steering wheel 1/6 of aturn clockwise
from the straight up position. SSD0392Z
IGNITION SWITCH (models without
Remote Control Key system)
5-14 Starting and driving